Transport window display menu

watup? quik question icant seem to open my transport window menu on logc express 7.2 like the legend or the position slider please help thanking you guys in advance, also i cant get sound out my mic im using an ozone controler need to know in steps how to make sure its in the right place sorry i know its a lame question!!!!!!

Hi
The best way of transporting area menu with keeping
all entries intact will be from transaction SE43. Select
the area menu and click on truck button which will
create a transport request.
For your case the area meny code will be S000
Kind Regards
Eswar
Message was edited by: Eswar Rao Boddeti

Similar Messages

Display issue with vertical windows start menu and dual screen

Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

I attempt to open a second window from the icon but it does not open then when firefox is closed it will not reopen because it is still running in processes but no window displayed until you kill the process and then restart firefox.

I attempted to open a new window from the Firefox icon but nothing happens. I then went on browsing and closed Firefox but was later unable to open it. I checked processes and it was already running but there was no window displayed. I am running Windows 7 Professional.
This is repeated any time I already have the browser open and wish to open a second instance.

'''Open a second window (not a second tab, that is different) when Firefox is already running and displayed on the monitor'''
*Firefox button > New Tab > New Window
*CTRL+N
*'''''If using the Menu Bar''''': File > New Window
**To '''''temporarily''''' display and make choices from the Menu Bar press the ALT key or the F10 key
**Also see: https://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing
'''Firefox "hang on exit"'''
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

I see a small window displaying "Are you sure you want to shut down your computer now". How do I stop appearing this window

I see a small window displaying "Are you sure you want to shut down your computer now". How do I stop appearing this window

Is this after you've chosen to Shutdown from the Menu, or just on it's own?
You can press the esc key to cancel, or Enter key to shutdown.
Check your System Preferences>Energy Saver>Schedule & see if it's set to shutdown at a certain time.

How to hide the default windows inherit menu bar

Dear All,
I am using oracle Application server 10g with windows server 2003. with oracle 11g database.
When ever I am accessing the application from client machine through browser i am getting the windows inherit menu bar at the top of the working space of the form.
I want to hide that default menu bar from viewing the application users.
Please help.
Thank you in advance....

actually vansul i have done this the default smart bar is removing by doing this
but i want to hide the black window bar which is displayed even if by removing
the default & smart bar.

Spotlight window displaying offscreen

Quite often the spotlight search window display offscreen, somethimes I can see a small part on the right of my desktop. The only way is to resolve this is to reboot OSX.

I disagree. The old Spotlight search results window was better and much more organised. It showed documents, images, movies etc. separately.
When you do a Spotlight search in the drop down list it shows you (from the menu bar) results grouped by documents, images, webpages, folders etc. etc. Then when you click on "Show All" it drops you into a folder window with everything all mixed together. And if your last Finder view was icon view you have a lot of icons. It can also be confused by users because in the Finder window they see options to search for "All Images", "All Documents" etc. but that is not for the search they did (further filtering) but essentially a new search.
It is not immediately logical. Granted in the search results (Finder?) window you can do more focused querying, but to make it a normal Finder window is not ideal.

NO TRANSPORT WINDOW???

Help..just loaded logic.7.2...first thing the demo songs did not transfer over to my hard drive..got to load them from disk to hear....second..when i first start up logic...i dont get any transport window...is this a bug?..i do get the transport window with the demos tho...how do u change the preferences for logic on templates....using a omega to hear sounds good..lots to learn but i wonder why the demos did not transfer over....on the scuplture demos i get a lot of u dont got access priv...i am the administrator how come i c this?....help pls..am i doin something wrong?..thank u a newbie here

ok found out my mistake...screen resolution..u need at least 1024 o in the demos to c the transport...yes i know about the key for transport..that did not work..had to increase the display pixels...now how do i get garabage instruments to show in browser..i just added 2 packs...and last but not least..the demos plays i heard them but if u start from scratch..how do u play ex instruments..i can get hem on screen but not hear..ty

SAP Window display settings

Hi Experts,
I have a small problem with my SBO window. I am not able to fully maximise it, basically it only goes into half the normal size, and when I maximise the window displays to the bottom half of the screen.
Please help!
Regards,
Lebo

Hi ,
You can do - Click one or two any screens in SBO and then click Window(Menu bar) > Cascade.
and also check General setting >Font & Bkgd
Thanks Somi Mishra

What to do if Windows displays an "iTunes.exe - Corrupt File" message

Greetings fellow Podders, Resident Furball here...
It is about time that I produced a single post for all the chkdsk issues that we've been discussing since November 2004. The Apple KB article seems to cover the major points succinctly, but we need to address the more serious variations and flavours of the problem.
<hr>
What to do if Windows displays an "iTunes.exe - Corrupt File" message
Many users are coming across this seemingly distressing error message in Windows when connecting their iPods. As described in Apple KB Article 300554, the message reads:
iTunes: iTunes.exe - Corrupt File
The file or directory \iPod_Control\iTunes\????????? is corrupt and unreadable. Please run the Chkdsk utility.
and the ????????? can be anything (eg. sysinfo, Temp1, DeviceInfo etc.).
<hr>
Don't panic!
If you do see this, don't worry, and don't panic. Contrary to what the error message reads, this issue actually has very little to do with iTunes. The iPod_Control is the key to this - because this folder doesn't even exist in iTunes... it's on the iPod!
...so! Installing and uninstalling iTunes really won't do you much good at all... it's the iPod that needs attention.
<hr>
What's causing this error?
To be honest, we don't know. We saw a massive number of reports of this issue back in November 2004, because iPod Updater 2004-11-15 contained a firmware bug that corrupted iPod system files when the Pod entered Deep Sleep.
But this firmware bug was corrected in iPod Updater 2005-06-26.
Of late, we have seen a resurgence in chkdsk errors on Discussions. Some of these are caused by the old buggy firmware that people still have. Some of the errors are more serious and are hardware and operating system-related. But we have still to pin down the exact cause of this error.
<hr>
Okay, so what do I do if I see this error?
In short, as Apple have recommended in their KB article:
Restore your iPod, using the latest iPod Updater.
Follow the instructions carefully. Ensure that you download the iPod Updater. Ensure that you install it, and then ensure that you run it with the iPod connected and follow the prompts to the letter.
The broad majority of the errors are painlessly fixed this way. Of course, it does mean that your iPod will be wiped, so make sure that you have your music/data backed up, and/or present in iTunes so you can resynchronise it when you have finished Restoring.
<hr>
Okay, I've Restored, but the error is still coming up
Are you sure you've Restored? Quite a number of folks are assuming that just downloading the iPod Updater is enough. It's not. And neither is downloading iPod Updater, and installing it on your computer. It needs to be implemented on the iPod, according to the iPod Updater instructions.
Okay, so if you have Restored your iPod, and you are still getting this error, then you have a variety of options available.
Chkdsk errors that are not fixed with a Restore are most likely down to two things:
1) A physical issue on the iPod itself
or
2) An issue on the computer's operating system
Here's where it gets woolly. There are a variety of things you could try...
Format the iPod in Windows
This would usually have the same effect as a Restore, but a deep-level format in Windows is something that Apple have recommended in the past, as a last resort to completely wipe the iPod before performing a Restore with iPod Updater. This process wipes the iPod.
To do this:
1) Enable Disk Mode on the iPod. You can do this either in iTunes (which is best), or manually on the iPod itself.
2) Open My Computer and locate your iPod
3) Right-click the iPod and select Format
4) Leave the parameters set at their defaults, and ensure Quick Format is unchecked
5) Hit Format
6) Then Restore your iPod as normal.
Run the Chkdsk utility
You could run the chkdsk utility on your iPod. But Restoring your iPod has the same effect as running chkdsk. Chkdsk does not wipe your iPod.
1) Enable Disk Mode as above
2) Determine the drive letter of your iPod from My Computer
3) Go to Start, Run
4) Type cmd. Hit Enter to take you to the Command Prompt.
5) Type chkdsk /f X:, where X is the drive letter of your iPod. Hit Enter, and any corrupt files are found and corrected.
Run Windows ScanDisk
ScanDisk is the Windows version of Chkdsk. It does not wipe your iPod.
1) Enable Disk Mode
2) Right-click the iPod in My Computer, select Properties
3) Select Tools
4) Select the option to scan the disk for errors
Try changing the Drive Letter of the iPod
Sometimes Windows confuses the drive letters, and this can cause the iPod to be adversely affected. Try the instructions detailed in Apple KB Article 93499 to change the drive letter of the iPod. This does not wipe your iPod.
Try changing Hardware Policies for the iPod
The Hardware Policies in Windows have been known to affect the way in which the iPod connects, synchronises, and disconnects. This does not wipe your iPod.
1) Enable Disk Mode so the iPod appears in My Computer
2) Right-click the iPod in My Computer
3) Select Properties
4) Select Hardware Policies
5) Select Optimize for Performance (instead of Optimize for Removal)
6) Restart your computer.
Contact Apple for a replacement iPod
Some chkdsk issues have been caused by faulty hardware. As a last resort, contact Apple Support by phone to report your issue, and/or request an iPod Service.
If you explain that you have followed all these steps, you should have a strong case for obtaining a replacement iPod.
<hr>
Thanks!
Thank you to everyone for their continued support, kindness and excellent troubleshooting skills here on Discussions. There are countless people that I am deeply grateful to for their assistance in handling this issue. Rest assured folks, you have made me the Discussions Furball that I am today.
Happy Podding folks!
Kind regards,
Gopha.
<hr>
References
1) The Original Corrupt iPod File thread from 2004. (Credit: AbbyM)
2) Our Summary and Index threads to consolidate the chkdsk issue at the height of its reign of terror.
3) Chkdsk is fixed by iPod Updater 2005-06-26.
4) Different flavours of chkdsk.
5) Happy Birthday chkdsk!.
6) Apple Level 2 Technical Support officially close the chkdsk casefile. (Credit: Apple Level 2)
7) Chkdsk can be fixed by changing the drive letter of the iPod. (Credit: daisysnroses, jchiu8)
8) Chkdsk can be fixed by changing the hardware policy. (Credit: Bruce Finn)
9) Chkdsk caused by faulty hardware. (Credit: Kiwi_Bloke)

iPod Updater 2006-03-23 has been released
iPod Updater 2006-03-23 includes iPod Software 1.1.1 for the new iPod and new iPod Software 1.1.1 for iPod nano.
iPod Updater 2006-03-23 contains the same software versions as iPod Updater 2006-01-10 for all other iPod models.
What's new in iPod Updater 2006-03-23:
- Volume limit
- Bug fixes
I have been trying to ascertain from Apple Support Level 2 as to whether the latest iPod firmware improves or provides better resolution for the chkdsk issue. If anyone has been using iPod Updater 2006-03-23 to resolve their chkdsk woes, feel free to post in here just to say how things worked out for you...
Kind regards,
Gopha.

In Windows, display reads UNMOUNTABLE_BOOT_VOLUME and will not proceed and I can't get back to the OS 10 Mac side of my computer. Help!

In Windows, display reads UNMOUNTABLE_BOOT_VOLUME and will not proceed and I can't get back to the OS 10 Mac side of my computer. Help!

buttercup7 wrote:
Wow, wonderful! I'm back on the OS X side of my computer and that's a good thing, THANK YOU!! My next question, if you can help, why did that happen the first place and what can I do to prevent it from happening again? I would be grateful for any insight you might offer.
I gave you the link to the Boot Camp documentation, read it carefully, mistakes in BC can have serious consequences.
If you have not yet backed up your Mac, DO IT NOW.

HT201343 I am trying to stream a video from U-tube on to my TV using my apply T.V. The airplay icon appears on my i-tunes but not on u-tube. It does stream on to my T.V using i-tunes so I take it it does have airplay, but does not appear n display menu. H

Airplay works on I-tunes but not on sites where you might want to stream, such as U-tube. It does not appear on my display menu settings, but as i-tunes as the icon I am thinking the computer must have the capability. Can anyone help, how to I turn airplay on so I can stream using my apple TV. I am sure as I-tune is working I have everything set up right.

Mirroring requires OSX 10.8 or higher.
Just use the YouTube app on the ATV.

Removing English IME while keeping Windows Displaying Language as English?

Until Windows 7, Windows Displaying Language (WDL) and IMEs were independent. It was possible to set the WDL to English and use only Japanese IME. From Windows 8, they seem to be combined. If I set WDL to English, I cannot find a way to remove English
IME.
Many foreign IMEs contain "English" mode. For example, the Japanese IME has direct input mode, and the Korean IME has English mode. So, English IME is not necessary, if you are using those IMEs. Having English IME is annoying because it adds another
complexity when you switch the IME using Shift+Alt or Windows + Space.
Is there any hack to remove the English IME while keeping WDL as English?

Hi,
Yes, this is by design on Windows 8.1. Unless you add another input method for this language package, it cannot be removed. It would keep one input method for this language package at least.
So far there is no any other method to remove IME and keep display language.
Karen Hu
TechNet Community Support

Error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink

error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink
How do I correct this to download iTunes so it will run?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

AD services not appearing in Windows 2012 menu

Hi there
I'm building a virtual 2012 environment with separate machines for AD and WSUS.
I've then built another machine called Management. Using the Windows 2012 menu, I've added the 2 machines above as machines to manage however there is a problem.
It does appear to add them as on my left hand side of the Windows 2012 panel, it shows WSUS and AD DS. However the problem is that when I click on the Tools machine to access AD, it doesn't exist. My understanding is that once I add that machine
as a machine to manage, I should get all the management options?
I've pretty sure it's worked in the past...
Any ideas?
Note: My firewall is on
Many thanks

Hi all
I got this query answered on the Windows 2012 general page, located here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/744f70f8-694b-4c6b-b0fc-6ce92e0f48a6/having-trouble-remotely-managing-other-windows-2012-servers?forum=winserver8gen
It seems I needed to add the Remote Management from the Features tab of the dashboard. I, mistakenly, was under the impression that by adding the servers to manage, it would automatically add the required Administration tool, depending on the server
role.
Thanks all for your replies and help.

Unable to open X windows display

hi
I'm trying to transfer some very old PV-wave (visual numerics) routines into solaris 10 and I keep getting the following errors
WTINIT: Unable to open X windows display.
WwError: Unable to create top level shell.
Now I know I haven't given much info here but I have a feeling that its simply that I haven't set some paths properly. Where does one normally call the X windows display from.
Much thanks
Anna
Sunblade 1000 running solaris 10.

Hi
Are you logged in to the machine remotely or locally?
If locally, then you shouldn't need to change anything.
There are two things that normally control the X display: the DISPLAY environment variable and the X authority. DISPLAY is usually set to [hostname]:0.0 (unless you have more than one display or are using an X server that emulates mutliple displays).
For X authority, you can either use xhost, which is simple but poses security issues, or xauth, less simple but more secure. If you are safely behind a firewall, and you trust your colleagues, then "xhost + [hostname]" is the quickest solution.
Paul

Transport window display menu

Similar Messages

Maybe you are looking for