Transport workset to EP quality portal

Dear All,
I need to transport the workset to the quality system..please guide..i have gone through the How to transport EP 6.0 content but not able to get clear idea.
Regards,
Samir

hi Samir,
As mentioned above, you can use transport packages to transport your worksets.
In your PCD, its helpful to create first a folder call "transport", so that you can use that folder to create all your transport packages.
Then go to System Administration/transport packages (detail navigation)/Export.
1) Drill down to the folder you created (like "transport"). Then right click the folder, select "New" and "Transport Packages". 2) Once transport package is created, its empty. So you will have to add the workset you want to transport into the transport package.
3) Drill down the PCD structure till you find the workset and the roght click and select "Add object to transport package". The object will then appear in your transport package.
Once you have all the workset ready, click on the "Export". Export the epa file into your local drive. This file will contain all your workset.
Then logon to your quality system and navigate to the same path for transport packages. This time, select "import" and then navigate the path where you have your epa file in local and then import.
Oh.. one important point, make sure that the folder you created for "transport" is identical between your Source (Test) Portal and your Target (Quality) Portal.
Thats it !! 
Hope that helps.
Ray

Similar Messages

  • ESS Services Personalization not reflecting in Quality Portal

    Hi Experts,
    Need some help on the the issues we are facing in quality Portal.
    In ESS, we have country specific services and we have done the Personalization of country specific Iviews in Dev Portal and tested with all the Country specificTest User Id's and it is working fine.
    Now, we have transported the content to Quality.
    In Quality Portal we have different User ID's specific to each country.
    When testing in Quality the Personalization changes are not getting reflected.
    What could be the issue..?
    Is there anything that we are missing to do in the backend..?
    Please provide some inputs.
    Regards,
    Eswari A.

    Hi Eswari,
    Refer to the below link to understand Transport of personalization Data.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e6/2cd4121a87405a90c91c09ec74cc8c/frameset.htm
    Cheers
    Deb

  • Transport of Employees from Quality to Production

    Hello,
    This is regarding Employee assignment in CRM Sales Organizations (using T code PPOMA_CRM). We have around 1200 employees to be assigned in CRM Sales Organizations & we have to assign USER ID's for each of these employees.Since we do not have all 1200 employee master data in Development Server we will have to do this excercise in Quality Server. We want to save all these assignments in a Transport request directly from Quality server, so later same can be transported to Production Server .
    Kindly let me know standard procedure for transporting all the assignments of employees & user ids from Quality to Production.
    Regards,
    Rajendra

    Hi Rajendra,
    Salesorganisation assignment to employee is masterdata and it willl not involve any tranport .
    You need to create the assignment in production client. Sales organisation Id will change from client to
    Client.
    Regards
    Pavan.A

  • Error Occured while transporting theme in to Netweaver Portal 7.3

    Dear All,
    We have installed fresh Portal 7.3 and we are trying to transport the theme from Netweaver portal 7.0 to 7.3, but i am getting error while importing the theme
    Error Message:
    " Cannot perform upgrade: Exception caught while upgrading: Image parameter "parPopInNoGradient" in browser section "default" is not available. This parameter should be used as target image parameter"
    same theme is being imported to netweaver portal 7.0 but not in 7.3
    Please help me ..........

    Dear all,
    we have the same problem, with a smiliar error message "Cannot perform upgrade: Exception caught while upgrading: Parameter "parTbsAnglePad2" in browser section "default" is not contained in parameterPool."
    but we have installed the most current patches. Is there another possibility, how we can proceed with that error ?
    Thanks and regards
    Georg

  • Unable to create a customizing request to transport BPC10 content to Quality

    Hi
    Unable to create a customizing request to transport BPC10 content to Quality .
    From the transport connections tab, i am selecting the required objects and then clicking the transport truck but it does not pop up and ask for a transport request .
    So please provide any solution.

    Hi,
    Check whether Standard transport switched-on is enabled or not. To get transport request your setting should be as follows : RSA1-->Transport Connection-->Edit-->Transport
    Hope it helps...
    regards,
    Raju

  • How to transport web xml content in portal

    Hi Everyone,
    I have created web xml content in my dev portal which has user messages.Now i wanr to transport all these to QA portal.i have transported all the content using KM content transport procedure. i even transported /etc/xmlforms.
    now if i check in QA portal i can see all the message links but when i click these links,a window pops up with XML code of that particular form instead of that message.
    Is there anything which i have forgotten or which needs to be done.
    Please do the needful.
    Thanks and Regards,
    Atul Dumbre.

    Hi Mikhail,
    Thanx a ton for your reply.
    My problem has been solved and now i can see all the web xml forom content in my QA Portal.
    But now my problem is that when i edit or create new message in my QA Portal it doesnt reflect in my User message area or in the messages list.
    Could you please help me out with that
    Thanks and Regards,
    Atul Dumbre
    Edited by: AtulDumbre on Jun 8, 2011 7:47 AM

  • Error log during transport(SE09) DEV to Quality

    Hi,
    I am facing issue while transporting object Development to Quality, please find below the details.
    I have created one class.
    1. Created one(first) method and calling new method(which is doesnt exist as of now).
    2. Created another(second) method which is called from first method.
    Activated both methods and class.
    When I do the transport I am getting below  error log but object got transported successfully(Working as required) in Quality system
    Error logs->"Method 'NO_CHANGES_MCON_ACON' does not exist. There is, however a method with the similar name 'NO_C"
    My observation is while transporting into Quality the first method trying to activate but the second method(which is called in 1st method) doesnt exist at this time.
    Will there be any impact when we move the object to PRD with this error log and is there any way to correct the errors(log)
    Please advise me.
    Regards,
    Vadamalai A

    Hi,
    Created one more TR and included the class object and transported into PRD. Now its fine
    We can close this thread.
    Regards,
    Vadamalai A

  • How to View Transport Log in DEV SAP Portal System

    Hi All,
    Kindly help me by giving me the path of where is the Import, Export and Transport Log maintained in SAP Portal.
    And is it posible to view the Log of other systems from DEV system? If yes then how.
    Thanks in Advance.
    Regards,
    Disha.

    Hi,
    Please navigate to usr/sap/trans/CMS/log to view logs.
    Alternatively in the CMS, you can click on "Go to History" which will display all previous transports. You can see the details from there.
    Thanks

  • Hierarchy transport from developement to Quality?

    Dear SDN,
    Hierarchy transport from developement to Quality.
    I have created one balance sheet Hierarchy on 0Account infoobject.
    Could you please tell me how to transport hierarchy from development to Quality.
    Waiting for response.
    Thanks & Regards,
    Kiran

    Hi Kiran,
    Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
    since you have done manulally you can do the same in other  systems also, but you need authrizations to maintain manually
    I have manually created my balance sheet hierarchy using RSH1 transaction code.
    you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
    check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
    Regards
    Daya Sagar

  • Transport DI JOBS to Quality Server

    Hi Everyone,
    I have created one project with 2 Job, 2 DS, 2 ABAP Data flow. I have used SAP Development system as source and MSSQL as Target.
    Can any one tell me how can i transport this project to Quality Server in Source and MSSQL as target?
    Thanks in advance.
    Regards,
    Rishit

    confiration will be saved under one transaport request nymber.
    if you want to move this configuration to Quality
    SELECT THE TRANSACTION CODE  SE09
    SELECT ONLY  MODIFIABLE  .
    ALL  Transport request will appear.
    then select transport request number &click on the  "Release directly button"(which is in Lorry shape).
    then ask your BASIS PERSON TO MOVE TO QULITY SERVER(you give the transport request number to your Basis person.
    chandra
    chandra

  • Error while transporting the request from quality to production of BI

    Dear all,
    When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
               Execution of programs after import (XPRA)
               Transport request   : RBDK904992
               System              : RBP
               tp path             : tp
               Version and release: 372.04.04 700
               Post-import methods for change/transport request: RBDK904992
               Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
               Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
               Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
               Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
               The errors affect the following components:
                 BW-WHM (Warehouse Management)
               Post-import methods of change/transport request RBDK904992 completed
                   Start of subsequent processing ... 20080406140407
                   End of subsequent processing... 20080406140408
               Execute reports for change/transport request: RBDK904992
               Reports for change/transport request RBDK904992 have been executed
                   Start of................ 20080406140408
                   End of.................. 20080406140408
               Execution of programs after import (XPRA)
               End date and time : 20080406140408
               Ended with return code:  ===> 8 <===
    Thanks in advance.
    Regards,
    M.M

    Hi,
    First try to figure out the object type from the text obtained by following steps above.
    Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
    After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error while transporting database index into quality system

    Hello,
    I am getting an error while transporting a new index in quality system.
    I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
    While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
    I retransported the objects using a new request. However I still got the same error.
    Please help.

    Navin,
    No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
    K.Kiran.

  • Error in transporting the Transformation to Quality system

    Hi All,
    I am trying to transport the transformation which has field level routine as well as start and end routine.
    I have basically ehanced the standard routine and it works perfectly fine in dev server . I have even loaded the data and generated reports on this cube.
    Now i am trying to transport it to Quality system. It throws up some "syntax error in routine" error. Very strange.
    All my routine in Dev is working but during transport ther is some issue.
    i saw some post on same but they are suggesting to regenerate a new transformation. For me this will be a nightmare as there are so many routnies at field level and as end routine.
    Kindly suggest how can i rectify this error.
    Note:- I had generated this transformation via old update rules with Migration function.
    Thanks & Regards,
    Anup

    Hi Anindya,
    Below is my source code for one field level routine in transformation.
    FORM routine_0080
      TABLES
       p_monitor         STRUCTURE rsmonitor
      USING
        COMM_STRUCTURE TYPE _ty_s_sc_1__rule_52
      CHANGING
        RESULT         TYPE _ty_s_tg_1_full-srvclen
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    * init variables
    * fill the internal table "MONITOR", to make monitor entries
      DATA: ultimo LIKE sy-datum.
      IF g_record_no <> RECORD_NO.
        g_record_no = RECORD_NO.
        CLEAR: employee_wa, person_wa.
        CLEAR: employee_md, person_md.
      ENDIF.
      PERFORM read_md_employee
              USING    COMM_STRUCTURE-employee
                       COMM_STRUCTURE-calday
                       RECORD_NO
                       RECORD_ALL
                       SOURCE_SYSTEM
              CHANGING employee_wa
                       RETURNCODE.
      employee_md = employee_wa.
      PERFORM calculate_ultimo
              USING COMM_STRUCTURE-calday+0(6)
                     RECORD_NO
                     RECORD_ALL
                     SOURCE_SYSTEM
              CHANGING ultimo
                       RETURNCODE.
      IF NOT employee_md-entrydate IS INITIAL.
        RESULT = ultimo+0(4) - employee_md-entrydate+0(4).
        IF ultimo+4(4) LT employee_md-entrydate+4(4).
          RESULT = RESULT - 1.
        ENDIF.
      ENDIF.
    * result value of the routine
    * if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    * if abort is not equal zero, the update process will be canceled
      ABORT = 0.
      p_monitor[] = MONITOR[].
      CLEAR:
        MONITOR[].
    CLASS lcl_transform IMPLEMENTATION.
      METHOD compute_0AGE_RANGE.
    *   IMPORTING
    *     request     type rsrequest
    *     datapackid  type rsdatapid
    *     SOURCE_FIELDS-CALDAY TYPE /BI0/OICALDAY
    *     SOURCE_FIELDS-EMPLOYEE TYPE /BI0/OIEMPLOYEE
    *    EXPORTING
    *      RESULT type _ty_s_TG_1-AGE_RANGE
        DATA:
          MONITOR_REC    TYPE rsmonitor.
    *$*$ begin of routine - insert your code only below this line        *-*
      Data:
        COMM_STRUCTURE   type _ty_s_SC_1__RULE_20,
        l_subrc          type sy-tabix,
        l_abort          type sy-tabix,
        ls_monitor       TYPE rsmonitor,
        ls_monitor_recno TYPE rsmonitors.
      data:
        l_monitor        type standard table of rsmonitor.
      REFRESH:
        MONITOR.
    * Runtime attributs
        SOURCE_SYSTEM  = p_r_request->get_logsys( ).
        MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
    *  Migrated update rule call
      Perform routine_0070
      TABLES
        l_monitor
      USING
        COMM_STRUCTURE
      CHANGING
        RESULT
        l_subrc
        l_abort.
    *-- Convert Messages in Transformation format
        LOOP AT l_monitor INTO ls_monitor.
          move-CORRESPONDING ls_monitor to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        IF l_subrc <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
        ENDIF.
        IF l_abort <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
        ENDIF.
    I am not able to change the code which are marked with " * ". Where can i change the code here?
    Regards,
    Anup

  • Issue on transporting a Request to quality

    HI,
    i have created a Function module(FM) . for that FM i have created a BOR in SWO1. I created a  TR for the function module. but while releasing it on development it said 'It is locked by a TR D01k990678'(that means somebody has created a TR earlier for that function module). On client side they released the Tr that i have created without releasing the earlier TR(D01k990678)
                                The fumction module is now available on Quality but the BOR is not available.I have used the (R3TR SOBJ) as object type inmy TR. still then it didn't came to quality. what is the problem?
    regards
    sandeep

    Hi,
    but they have alraedy released my TR without releasing the older TR forcefully.
    Everything except the BOR created on development came to quality.
    While transporting my TR forcefully they got the error log. Which is as below.
    <b>Object type zincdata_d couldn't be generated.
    Report/prog statement missing or prog type is I
    data object not yet implemented
    error occur during posthandling WSO_OBJTYPE_AFTER_IMPORT
    SWO_OBJTYPE_AFTER_IMPORT BELONG TO PACKAGE SWO
    the error affected the following component
    BC_DWB_TOO_BOB</b>
    I am not using any include . Everything is fine on develoment.
    weather i need to create a TR for BOR and transport it or releasing the older TR will resolve the issue
    regards
    sandeep

  • Transport of object from Quality to Production.

    Hi,
    I am a technical designer and have a limited understanding on the transport management system and basis.
    I had recently created an object on the development system and provided my user with the transport request number. She had moved it to Quality and tested it. The object is working fine and she wants to move it to the production system.
    I was under the impression that the request would show up on the production system and could be imported from quality but it is not.
    Could some one explain as to what I am missing here? Is there anything I could do from my side to get the object moved from Quality to Production?
    Regards,
    Prem.

    Hi Prem
    Plz check  whether your request is relased and transported
    correctly.
    for this log into quality system and type the tcode STMS_IMPORT.
    search for your request,
    if available ,check if there is a green tick mark against that, if yes then it can be imported to production system ( that has to be done by your BASIS personell).
    if not,
    check  any filter criteria is set in the fields displayed and  remove / change  if required that as per requirement.
    or , use the menu path GOTO -> IMPORT HISTORY (Ctrl+F7) and search ther (here also check for the filter criteria).
    it should be available, if it is transported correctly.
    do the same in your production system also, u can find your request (but unless transported to production there will not be the green tick mark against that)
    reward if useful.
    Regards
    Prabumanoharan

Maybe you are looking for