Transportable Tablespace in ASM

Hi all,
I want to move one tablespace from a database to another database using the 10g cross platform transportable tablespace.
My source database is running on Linux 32 bit (Little endian format) and the target database is running on AIX (Big endian format). However both databases use the ASM diskgroup as a storage option.
Do I need to convert the endian format of the source tablespace datafile to transport to the target database?
Thanks,

Because ASM diskgroup consists of one or more raw
partitions or raw devices, I am wondersing if I still
have to convert the endian format of datafiles..Interesting question.
As you said earlier:
- Linux natively uses Little endian
- AIX natively uses Big endian
You imply that perhaps Linux's ASM 'converts' to an 'Oracle neutral-endian' format whenever something is stored in the ASM disk group. Which would make it identical to AIX's ASM format, also 'converted'.
(I use 'convert' in quotes, as one or the other would not need to get switched, if a specific endian form is maintained.)
Worth investigating further. Although I am not sure why Oracle would introduce the overhead of conversion to-and-from every storage call.

Similar Messages

Stuck with transported tablespace and ASM

Hi,
I'm on 10.2.0.5.4 and playing with TTS feature .
So I've made TTS on source DB 10.2.0.5 via rman tts feature (auxilary instance) , and copied to cloned database with ASM (same os solaris10).
Now my situation is as follows :
on target I can see TTS1 tablespace
FILE_NAME                                          TABLESPACE_NAME                STATUS
+DG1/sol10p/datafile/users.262.763395469           USERS                          AVAILABLE
+DG1/sol10p/datafile/sysaux.260.763395447          SYSAUX                         AVAILABLE
+DG1/sol10p/datafile/undotbs1.259.763395423        UNDOTBS1                       AVAILABLE
+DG1/sol10p/datafile/system.258.763395387          SYSTEM                         AVAILABLE
+DG1/sol10p/datafile/example.261.763395463         EXAMPLE                        AVAILABLE
+DG1/sol10p/datafile/assm.257.763395311            ASSM                           AVAILABLE
/u01/tts/tts1.274.763488147                        TTS1                           AVAILABLE
/u01/tts/tts1.272.763487799                        TTS1                           AVAILABLEbut when trying to copy those files into ASM I'm getting
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace           RB segs Datafile Name
1    510      SYSTEM               ***     +DG1/sol10p/datafile/system.258.763395387
2    310      UNDOTBS1             ***     +DG1/sol10p/datafile/undotbs1.259.763395423
3    250      SYSAUX               ***     +DG1/sol10p/datafile/sysaux.260.763395447
4    62       USERS                ***     +DG1/sol10p/datafile/users.262.763395469
5    100      EXAMPLE              ***     +DG1/sol10p/datafile/example.261.763395463
6    2048     ASSM                 ***     +DG1/sol10p/datafile/assm.257.763395311
List of Temporary Files
=======================
File Size(MB) Tablespace           Maxsize(MB) Tempfile Name
1    512      TEMP                 512         +DG1/sol10p/tempfile/temp.265.763396585
RMAN> backup as copy datafile '/u01/tts/tts1.274.763488147' format '+DG1';
Starting backup at 03-OCT-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/03/2011 20:00:34
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /u01/tts/tts1.274.763488147Please advice .
Regards
GregG

I'm not using catalog (connecting as nocatalog) Hmm....
The files are listed in V$DATAFILE and DBA_DATA_FILES but not in an RMAN REPORT SCHEMA ?
That's curious. V$DATAFILE and RMAN REPORT SCHEMA would both be reading from the controlfile.
What was the sequence of actions to transport the tablespace ? Have you tried reconnecting with RMAN ?
Hemant K Chitale

Standby not in sync because test on primary of transportable tablespace etc

This environment is new build environment , have not in use yet.
db version is 11.2.0.3 in linux, both primary/standby are configured in RAC two nodes and storage are in ASM storage.
primary db had tested by migration data using transportable tablespace methods. So the datafiles imported were put in a local filesystem which I have to switch to ASM afterwards.
In such way, the standby db got the impression that datafiles should be in local filesystem and it got invalidated.
Here is the error from standby log:
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: '/stage/index.341.785186191'
and datafiles names are all in local filesystem in standby: /stage/...../
However in primary datafile names are all in ASM instance:
+DAT/prd/datafile/arindex.320.788067609
How to resolve such situation?
Thanks

My steps for transportable tablespaces after scp the datafiles to linux are import the transportable datafiles into the database. and then using rman to copy it to "+DATA' in asm. and then switch dababase to copy.
Those procedure all worked on primary.
The standby was built before the transportable tablespace when there are only system, users, tools etc basic tablespaces. it worked and in sync with primary. However everytime the primary tested data migration with the transportable tablespaces, it will not work.
so what is the right way to perform this migration? how can I made standby in sync with primary and to read the datafiles in ASM storage?
Is there a way before the RMAN command to transfer the filesystem datafile to ASM, can I copy those local filesystem datafiles to ASM storage ? then do a import transportable datafiles with those on ASM?If you added any datafiles manually then those will be created in standby also as per the settings,
But here you performing TTS, of course DML/DDLs can be transfered to standby by archive logs, but what about actual datafiles? Here in this case files exist in primary & those files not exist in standby
AFAIK, you have to perform couple of steps. Once after your complete migration done in primary do as follows. (Do test it)
1) Complete your migration on primary
-- Check all data file status and location.
2) Now Restore standby controlfile & newly migrated tablespaces in standby Database
-- here you can directly restore to ASM using RMAN, because you are taking backup in primary using RMAN. So RMAN can restore them directly in ASM file system.
3) Make sure you have all the datafiles where you want and take care no one data file is missing. Crosscheck all tablespace information in primary & standby databases.
4) Now start *MRP*
Here is my above plan, But I suggest to test it...
One question, After *successful migration* are you able to SYNC standby with primary earlier ?

Oracle 10gR2 - Any way to speed up Transportable Tablespace Import?

I have a nightly process that uses expdp/impdp with Transportable Tablespace option to copy a full schema from one database to another. This process was initially done with just expdp/impdp, however the creation of the indexes started to slow down the process at which time I switched to using Transportable Tablespace.
In the last 3 months, the number of objects in the schema has not changes however the amount of data has increased 15.73%. At the same time, the Transportable Tablespace impdp has increased 30.77% in time to process.
Is there any way to speed up a Transportable Tablespace impdp in Oracle 10gR2? The docs show that I cannot use parallel with TTS. I have excluded STATISTICS in the export.
Eventually I will be moving away from doing this TTS expdp/impdp, however for now I need to do what I can to contain the amount of time it takes to process.
Environment: Oracle 10.2.0.4 (source and destination) on Sun Solaris SPARC v10. We are not using ASM currently. Tablespace is 6 datafiles for a total of 87.5GB, 791 tables, 1924 indexes, 1773 triggers, and 10 LOBs.
Any help would be greatly appreciated.
Thanks!
-Vorpel

My reading of this thread was that there was a need to be able to do offline setups when the client had lost oracle lite (we get this on PDAs all the time when they go totally dead), so the CD install is something that can be sent out.
Any install (CD or otherwise) will be empty in terms of applications and data, not much you can do about that on a CD, but depending on the type of device and the storage possibilities you have you can secure the database and application files seperately. for example on a PDA using the external SD or flash for the data and file storage will keep them when the orace directory is lost from main storage and therefore all thet is needed after the oracle lite recovery is to recreate the odbc file (and possibly polite if you have special parameters). The setting of the crr flags for 'real' data on the server is a trick to bring the database up to date without a total rebuild.
NOTE if you use SD cards etc. on PDAs/small devices, beware of windows ce/mobile power up differential between main memory and external storage. If you power down in the middle of an update or query, you can get device read/write errors when the device powers up due to processing continuing before the storage media is active

Run transportable tablespace

Hi;
I have a file system database on linux which is 10g.I want to transport this database to new host asm on 11g.
I am unable to use transportable database since the endian formats are different. I want to use transportable tablespace feature with rman.
The database is pretty big. I dont have enough space to do the conversion on the source database.
If I ship the backup of the database to new host, can I do the conversion on new host ?
ie:
run {
allocate channel t1 type 'SBT_TAPE';
transport tablespace "USERS"
Tablespace destination '/ora_backup/tts'
Auxiliary destination '/ora_backup/tts'
Datapump directory data_pump_dir
dump file 'tts_test.dmp'
Import script 'tts_test.imp'
Export log 'exp_tts_test.log'

Ricardo,
I had given you a link in the other thread of yours. Did you see it? If not , please do. You can do the conversion either on the source or you can ship the files on the target host and can convert there as well. Please see the link since it covers it completely.
Aman....

Transport Tablespace Issues

hi.. i'm trying to use transport tablespace across the same platforms rather than performing export/import . i'm following the steps in Note:371556.1to exp/imp ASM files.
i have finished all the steps and successfully transport the tablespace. this process involved only 2 TBS, CC_DATA and CC_INDEXES and the schema is CC. i choose to check the full containment before the export done. but when i count the objects before export and after the import, the count is different. the question is how to make the count of objects is same before and after transport.
before export
SQL> select count(*), object_type from user_objects group by object_type;
COUNT(*) OBJECT_TYPE
33 SEQUENCE
3 DATABASE LINK
55 TABLE
82 INDEX
19 SYNONYM
39 VIEW
6 rows selected.
after import
SQL> select count(*), object_type from user_objects group by object_type;
COUNT(*) OBJECT_TYPE
82 INDEX
55 TABLE
thanks in advance.
-julie-
Edited by: gunit on Nov 17, 2008 7:35 PM

It's a limitation on transportable tablespace (http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#i1007233)
You cannot transport the SYSTEM tablespace or objects owned by the user SYS. Some examples of such objects are PL/SQL, Java classes, callouts, views, synonyms, users, privileges, dimensions, directories, and sequences.So you need to transfer the views, sequences,etc., one method is using exp/imp.
[source]$ exp cc/<pwd> file=cc.dmp rows=no
[target]$ imp cc/<pwd> file=cc.dmp ignore=yes HTH
Enrique

Need help on transportable tablespace, after convert and move datafile over

I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.

I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

Error while using Transport Tablespace

Hi,
I am running into the below errors when I do the transport tablespace in 11g using the OEM --> Data Movement --> Transport Tablespace.
RMAN-03009: failure of conversion at source command on ORA_DISK_1 channel at 04/22/2008 08:28:32
RMAN-20038: must specify FORMAT for CONVERT command
When I search for the RMAN-03009 in OTN,Metalink,google , I get some unrelated hits with different message and not the "Failure of Conversion..." message.. for this message code.
Please advice if you have had the same issue and resolved the same.
Thanks
Sheik

From 11g Error Messages:
RMAN-20038: must specify FORMAT for CONVERT command
Cause: No FORMAT was specified when using CONVERT command.
Action: Resubmit the command using FORMAT clause.

Steps to create Cross-Platform Transportable Tablespaces

hi
what is the steps to do Cross-Platform Transportable Tablespaces.
i want to perform this in my pc, i have linux and windows in same PC, i want to migrate from linux to windows and vice versa.
so can i know complete steps and commands to perform Cross-Platform Transportable Tablespaces. to get complete knowledge i am doing this so i can implement this in my office when any migrate issues comes. so once i do this i will get confidence so that i can do the same in my office which saves my time.
veeresh s
oracle-dba
[email protected]

Hi, also you can review the Note:413586.1 into metalink site.
Good luck.
Regards.

Transport tablespace related problem

Hi all,
I have a problem i want to export tablespaces as i have to migrate my db from oracle 9.2 to oracle 10.2 from win to RHEL4.......but i am getting an error ,pls suggest me for the same....
SQL> @G:\oracle\ora92\rdbms\admin\dbmsplts.sql;
Package created.
Package created.
Grant succeeded.
Package created.
Grant succeeded.
drop view sys.transport_set_violations
ERROR at line 1:
ORA-00942: table or view does not exist
PL/SQL procedure successfully completed.
drop table sys.transts_error$
ERROR at line 1:
ORA-00942: table or view does not exist
Package created.
SQL> exec sys.dbms_tts.transport_set_check('SRO',true);
BEGIN sys.dbms_tts.transport_set_check('SRO',true); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_TTS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
SQL> desc dbms_tts
PROCEDURE DOWNGRADE
FUNCTION ISSELFCONTAINED RETURNS BOOLEAN
Argument Name                  Type                    In/Out Default?
TS_LIST                        CLOB                    IN
INCL_CONSTRAINTS               BOOLEAN                 IN
FULL_CHECK                     BOOLEAN                 IN
PROCEDURE KFP_CKCMP
PROCEDURE TRANSPORT_SET_CHECK
Argument Name                  Type                    In/Out Default?
TS_LIST                        CLOB                    IN
INCL_CONSTRAINTS               BOOLEAN                 IN     DEFAULT
FULL_CHECK                     BOOLEAN                 IN     DEFAULT
SQL> exec dbms_tts.transport_set_check('SRO',true);
BEGIN dbms_tts.transport_set_check('SRO',true); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_TTS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1

Are you,by any chance, running Oracle 9i installation code in an Oracle 10g database?
If so : why?
As far as I know you can only transport tablespaces to a database of an identical version, so it looks like this is not going to work.
Sybrand Bakker
Senior Oracle DBA

Transportable tablespace Windows to Linux different character sets

Hi,
Is it absolutely necessary to have the same character set when doing a cross platform transport tablespace from Windows to Linux? We are trying to do it on Oracle10gR2 from Windows to Linux.
Thank you.

Hi, yes is necessary that your databases have the same chracter set, please review the limitations into the Note:291024.1.
Luck.
Have a good day.
Regards.

Error ORA-39125 and ORA-04063 during export for transportable tablespace

I'm using the Oracle Enterprise Manager (browser is IE) to create a tablespace transport file. Maintenance...Transport Tablespaces uses the wizard to walk me through each step. The job gets created and submitted.
The 'Prepare' and 'Convert Datafile(s)' job steps complete successfully. The Export step fails with the following error. Can anyone shed some light on this for me?
Thank you in advance!
=======================================================
Output Log
Export: Release 10.2.0.2.0 - Production on Sunday, 03 September, 2006 19:31:34
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Username:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "SYS"."GENERATETTS000024": SYS/******** AS SYSDBA dumpfile=EXPDAT_GENERATETTS000024.DMP directory=EM_TTS_DIR_OBJECT transport_tablespaces=SIEBEL job_name=GENERATETTS000024 logfile=EXPDAT.LOG
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS]
ORA-04063: view "SYS.KU$_IOTABLE_VIEW" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.KUPW$WORKER", line 6241
----- PL/SQL Call Stack -----
object line object
handle number name
2CF48130 14916 package body SYS.KUPW$WORKER
2CF48130 6300 package body SYS.KUPW$WORKER
2CF48130 2340 package body SYS.KUPW$WORKER
2CF48130 6861 package body SYS.KUPW$WORKER
2CF48130 1262 package body SYS.KUPW$WORKER
2CF0850C 2 anonymous block
Job "SYS"."GENERATETTS000024" stopped due to fatal error at 19:31:44

More information:
Using SQL Developer, I checked the view SYS.KU$_IOTABLE_VIEW referred to in the error message, and it does indeed report a problem with that view. The following code is the definition of that view. I have no idea what it's supposed to be doing, because it was part of the default installation. I certainly didn't write it. I did, however, execute the 'Test Syntax' button (on the Edit View screen), and the result was this error message:
=======================================================
The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
Unknown error(s) parsing SQL: oracle.javatools.parser.plsql.syntax.ParserException: Unexpected token
=======================================================
The SQL for the view looks like this:
REM SYS KU$_IOTABLE_VIEW
CREATE OR REPLACE FORCE VIEW "SYS"."KU$_IOTABLE_VIEW" OF "SYS"."KU$_IOTABLE_T"
WITH OBJECT IDENTIFIER (obj_num) AS
select '2','3',
t.obj#,
value(o),
-- if this is a secondary table, get base obj and ancestor obj
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, secobj$ s
where o.obj_num=s.secobj#
and oo.obj_num=s.obj#),
null),
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, ind$ i, secobj$ s
where o.obj_num=s.secobj#
and i.obj#=s.obj#
and oo.obj_num=i.bo#),
null),
(select value(s) from ku$_storage_view s
where i.file# = s.file_num
and i.block# = s.block_num
and i.ts# = s.ts_num),
ts.name, ts.blocksize,
i.dataobj#, t.bobj#, t.tab#, t.cols,
t.clucols, i.pctfree$, i.initrans, i.maxtrans,
mod(i.pctthres$,256), i.spare2, t.flags,
t.audit$, t.rowcnt, t.blkcnt, t.empcnt, t.avgspc, t.chncnt, t.avgrln,
t.avgspc_flb, t.flbcnt, t.analyzetime, t.samplesize, t.degree,
t.instances, t.intcols, t.kernelcols, t.property, 'N', t.trigflag,
t.spare1, t.spare2, t.spare3, t.spare4, t.spare5, t.spare6,
decode(bitand(t.trigflag, 65536), 65536,
(select e.encalg from sys.enc$ e where e.obj#=t.obj#),
null),
decode(bitand(t.trigflag, 65536), 65536,
(select e.intalg from sys.enc$ e where e.obj#=t.obj#),
null),
(select c.name from col$ c
where c.obj# = t.obj#
and c.col# = i.trunccnt and i.trunccnt != 0
and bitand(c.property,1)=0),
cast( multiset(select * from ku$_column_view c
where c.obj_num = t.obj#
order by c.col_num, c.intcol_num
) as ku$_column_list_t
(select value(nt) from ku$_nt_parent_view nt
where nt.obj_num = t.obj#),
cast( multiset(select * from ku$_constraint0_view con
where con.obj_num = t.obj#
and con.contype not in (7,11)
) as ku$_constraint0_list_t
cast( multiset(select * from ku$_constraint1_view con
where con.obj_num = t.obj#
) as ku$_constraint1_list_t
cast( multiset(select * from ku$_constraint2_view con
where con.obj_num = t.obj#
) as ku$_constraint2_list_t
cast( multiset(select * from ku$_pkref_constraint_view con
where con.obj_num = t.obj#
) as ku$_pkref_constraint_list_t
(select value(ov) from ku$_ov_table_view ov
where ov.bobj_num = t.obj#
and bitand(t.property, 128) = 128), -- IOT has overflow
(select value(etv) from ku$_exttab_view etv
where etv.obj_num = o.obj_num)
from ku$_schemaobj_view o, tab$ t, ind$ i, ts$ ts
where t.obj# = o.obj_num
and t.pctused$ = i.obj# -- For IOTs, pctused has index obj#
and bitand(t.property, 32+64+512) = 64 -- IOT but not overflow
-- or partitioned (32)
and i.ts# = ts.ts#
AND (SYS_CONTEXT('USERENV','CURRENT_USERID') IN (o.owner_num, 0) OR
EXISTS ( SELECT * FROM session_roles
WHERE role='SELECT_CATALOG_ROLE' ));
GRANT SELECT ON "SYS"."KU$_IOTABLE_VIEW" TO PUBLIC;

Transport Tablespace via RMAN

Hii all
I configured control file autobackup on and take a backup whole database with "backup database;" command and
RMAN> transport tablespace users tablespace destination 'c:\Transport' auxiliary destination 'c:\Auxi';
I am receiving ;
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
In begining lines of rman command I saw that "control_files=c:\Auxi/cntrl_tspitr_ST1_dFcB.f" looks like using unix path format in windows? Have you any idea ?
Best Regards
Oracle 10.2.0.3 on Vista Sp2

hi
Yes it is on besides I take backup with "backup database include current controlfile" nothing has changed
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\
NCFST1.ORA'; # default
also I have just tested same command on aix platform it works well I think this is related windows platform ?
Edited by: EB on Sep 25, 2009 4:56 PM

Oracle Upgrade V9 to V10 - Transportable Tablespaces

Hi,
I am upgrading a database from Oracle 9i v 9.2.0.6.0 to Oracle 10g 10.2.0.4.0. Both servers are running Windows 2003 Server 32Bit.
My plan is to upgrade using Transportable Tablespaces. This is what I have done.
1) exec DBMS_TTS.TRANSPORT_SET_CHECK('XXX,XXX,XXX,XXX,XXX,XXX,XXX,XXX,XXX,XXX,XXX',true); --> This checked out fine.
2) Set the above tablespaces as read only.
3) Copied all the datafiles to the new server (2TB)
4) Did the export: exp 'xxx@xxxx as sysdba' transport_tablespace=y tablespaces=(XXX,XXX,XXX,XXX,XXX ETC...) tts_full_check=y file=c:\EXP.dmp log=c:\exp.log
5) Here comes the problem: When I do the import it imports the tables with the data and forces me o create the Schemas manually. It does not import the users / packages / views / triggers etc...
I need to do an export that that will include everything (Creates Schemas, Packages, Views, Triggers, Tables, data).
I know there is a function FULL=y, this will not work as I do not have an additional 2TB for the export file.
Can someone please explain how to do this?
Kind Regards
Henk

Welcome to the forums !
Is there a reason you are using transportable tablespaces ? Would it not be easier to do an in-place upgrade on the current server, then copy/clone the instance to the new server ?
HTH
Srini

Transportable tablespaces for migration and upgrade

Hello All,
I'm trying to find out some theory about transportable tablespace and upgrade in a single step. I've to move a DB from a Windows server to a Linux server. Win is running 10.1 and Linux 10.2 . It's possible to use RMAN to migrate the whole database and then on new node run startup upgrade and catupgrd.sql to upgrade catalog ?
Should work?
Thanks
Raj

The following doc for TDB says :-
"Note: TDB requires the same Oracle Database software version on the source and target systems; hence, a database upgrade cannot be accomplished simultaneous with the platform migration. However, best practices for a database upgrade, as documented in the Oracle Upgrade Companion, also apply to any planned database maintenance activity, including platform migration."
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_PlatformMigrationTDB.pdf
There is also an Oracle Whitepaper called "Database Upgrade Using Transportable Tablespaces: Oracle Database 11g Release 1" but I am still trying to find a copy.

Transportable Tablespace in ASM

Similar Messages

Maybe you are looking for