Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

Similar Messages

  • Template does not fit into the window

    Hello all,
    <b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
    I am getting the above error in when i try to preview my smartform.
    The template is in footer window. I have only 3 lines in the template.
    And the size of template is less than window size.
    I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
    If you have any suggestions Please help.
    Thanks.

    Hi,
    Please check the following points:
    1. Font size and font family.
    2. Line spacing
    3. Allignment.
    4. Left and right margin
    Deserve Rewards.
    regards.

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

    The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2.  Has anyone seen anything like this before? I've included a picture

    You can return a new Mac within 14 days of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.

  • I have bought an Iphone 4 16g but the Tmobile Sim card which fitted my IPhone 3 does not fit into the IPhone 4

    If anyone has any advice or information I would be very grateful. It appears that the Sim "holder" is too small for my Sim card used in the IPhone 3.

    You should get a new micro-SIM from T-Mobile. It is possible to cut down a standard SIM, but often that leads to erratic behavior or destruction of the SIM.
    Regards.

  • Getting "Table %TEMPLATE does not fit into window" error

    Hello,
    I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
    This only happens when I go to that printer.  I can print fine to a laser printer.
    I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
    I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
    Has anyone seen this before?  Please help.   Thanks.

    Hi James,
    You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
    What ever you create should be within this width and height .
    So accordingly adjust the width and height of your windows and components within them
    Regards,
    Dep

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Table does not fit into window.

    Hi Guys,
    When I execute the Smartforms I get this message ? '
    "Table does not fit into window."   any guess why this message ?
    Regards

    >
    P R Raghu wrote:
    > "Table does not fit into window."   any guess why this message ?
    > Regards
    If TABLE does not fit WINDOW try to take it through the DOOR LOL
    Doesn't the error seems self explanatory to you?
    Regards
    Karthik D

  • Photo does not fit in the screen

    I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g     and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image  3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
    Thank you for your help.
    Heike

    Hello again,
    I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
    I got rid of the stroke and the fill.
    I filled with a .jpg image 3000 px wide.
    For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
    I still have no idea, what I made wrong. Thanks for your help
    Heike

  • Error 28: Selected item could not fit into memory question?

    hi evreyone,
    don't know but Solaris 10 is not making any sense to me at all.the peoblem is i have installed Solaris 10 many times ,sometime GRUB detected Windows XP automatically and other times it could not and other times it halted during installation and said I/O error could not install all packages ,so i changed my CD-ROM anyway it did install Solaris 10 some times but GRUB could not detec Windows XP automatically and i could not configure GRUB to do so manually so i bought a new CD-ROM and mounted it on my pc.anyway when i tryed to install Solaris 10 and choosed Solaris from the booting screen it displayed the above mentioned error:
    Error 28: Selected item can not fit into memory
    the upper memory in the booting screen was: 752576 kb
    lower memory: 639 kb
    don't know but Solaris 10 is not making any sense to me since a week ,it's behavior is not understood .although i did run the install check before starting the installation and it did say Soalris 10 can be installed on you system.my hardware information is the following:
    Gigabyte mother board with bult in VGA ,Sound ,Ethernet
    40 GB Western Digital Hard Disk
    750 MB of RAM's
    Pentuiem 4 ,1 MB Cache
    please adivce if anyone knows about this?

    I was trying to fix this for more then 2 weeks , finally the solution to fix this was easy: GRUB new version 97 is crab ( sorry why i do not know but .. )
    I have one disk with: windows xp and second part for fedora
    I got the error after upgrading to fedora 6
    I got GRUB 97 version with this fedora 6 automatically installed
    and while booting on disk :
    Error 28: Selected item could not fit into memory
    all forums are explaining that it is not possible to boot via GRUB on a 2 nd partion to Linux ( fedora) because of 1024 constrains etc.
    I can tell you that after installing GRUB version 92 in a fedora on the harddisk ( 2nd part) started via rescue cd
    I installed the GRUB older version 92 forced to overwrite the GRUB version 97 on this partion of fedora
    run grub via recue cd but run version 92 installed now
    via command
    /mnt/sysimage/sbin/grub
    root ( hd0,1)
    setup (hd0,1)
    it installs grub on the boot record
    and now I can boot without any problem on this GRUB in the boot record of the 2nd part of the disk
    I use GAG on the MBR and GRUB ( version 92) on the boot record of Fedora partition and now it starts easy , no problems anymore
    good to know, but it took some time to find it

  • Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

    Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

    Clean the lint or grit out of it with canned air or a toothpick.

  • I have a Sony Mini HiFi ((CMT-BX70DBI) and my 4th gen does not fit on the iPod dock. I assume I need a new adaptor but don't know which one??

    I have a Sony Mini HiFi (CMT- BX70DBI) and my 4th gen does not fit on the dock. I assume I need an adaptor, but which one?

    If the Sony uses the Universal Dock System you need this adopter.  If it does not they try Sony.
    http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc

  • CRM 2007 IC : error "BP category 2 does not fit the data in category 1"

    Hi Guys,
    When I am trying to save the data on the Bupacreate page it gives the error as follows.
    "BP category 2 does not fit the data in category 1".
    Can anyone suggest what is causing this error to happen and how this error can be corrected.
    thanks & regards
    Sandy

    Hi,
    This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
    Best regards
    Pankaj Kumar

  • Error: 'BP category 1 does not fit the data in category 2'

    Hi,
                i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
    thanks:)
    pushpa
    *table for storing the line by line records in the excel file
    TYPES: BEGIN OF TTAB,
            REC(1000) TYPE C,
           END OF TTAB.
    DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
    *variable for storing the name of the excel file to be uploaded
    DATA UP_FILE TYPE STRING.
    *data to be uploaded
    TYPES: BEGIN OF TDAT,
            FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
            FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
            FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
            FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
            FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
            FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
            FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
           END OF TDAT.
    DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
    DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
          CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
          ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
          ADDRESS TYPE BAPIBUS1006_ADDRESS,
          BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    PARAMETERS P_FILE TYPE LOCALFILE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          STATIC    = 'X'
        CHANGING
          FILE_NAME = P_FILE.
    START-OF-SELECTION.
      UP_FILE = P_FILE.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = UP_FILE
        TABLES
          DATA_TAB                = ITAB
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
    *writing out the contents of the internal table itab
      LOOP AT ITAB.
        WRITE:/ ITAB-REC.
        CLEAR IDAT.
        SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                    INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
        APPEND IDAT.
      ENDLOOP.
      LOOP AT IDAT.
        MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
              IDAT-FLD2 TO ADDRESS-STREET,
              IDAT-FLD3 TO ADDRESS-CITY,
              IDAT-FLD4 TO ADDRESS-REGION,
              IDAT-FLD5 TO ADDRESS-POSTL_COD1,
              IDAT-FLD6 TO ADDRESS-COUNTRY,
              IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
              '0001' TO CENTRALDATA-PARTNERTYPE.
        CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
          EXPORTING
            PARTNERCATEGORY         = '1'
            CENTRALDATA             = CENTRALDATA
            CENTRALDATAORGANIZATION = ORGANIZATION
            ADDRESSDATA             = ADDRESS
          IMPORTING
            BUSINESSPARTNER         = BUSINESSPARTNER
          TABLES
            RETURN                  = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        REFRESH BAPIRETURN.
        CLEAR BAPIRETURN.
        CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
          EXPORTING
          BUSINESSPARTNER = BUSINESSPARTNER
          BUSINESSPARTNERROLE = 'BUP001'
          DIFFERENTIATIONTYPEVALUE =
          TABLES
          RETURN = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
      ENDLOOP.

    Hi Pushpa,
             you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
    CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
        EXPORTING
          BUSINESSPARTNER           = SEARCH_PARTNER
          CONTACTPERSON             = CONTACT_SAP
      VALIDFROMDATE             = '00010101'
      VALIDUNTILDATE            = '99991231'
      DEFAULTRELATIONSHIP       =
      ADDRESSGUID               =
          CENTRALDATA             = WA_CENTRAL_DATA
          ADDRESSDATA             = WA_ADDR_DATA
          TABLES
        BAPIADTEL                 = I_TEL_DATA
        BAPIADFAX                 = I_FAX_DATA
      BAPIADTTX                 =
      BAPIADTLX                 =
        BAPIADSMTP                = I_EMAIL_DATA
      BAPIADRML                 =
      BAPIADX400                =
      BAPIADRFC                 =
      BAPIADPRT                 =
      BAPIADSSF                 =
      BAPIADURI                 =
      BAPIADPAG                 =
      BAPIAD_REM                =
      BAPICOMREM                =
         RETURN                    = I_RETURN
    hope this will help you
    Siva

Maybe you are looking for

  • PDF Printing Troubleshooting in ApEx 3.0

    Hi, I'm trying to implement the PDF Printing functionality that was introduced in ApEx 3.0 I have an ApEx page that produces reports and I want to offer two options: exporting to excel and printing to PDF. The exporting to excel seems to work fine by

  • Exchange rate differences between GR and IR

    Hi Gurus, i have a problem about a exchange rate differences beetween GR and IR. Customizing setting is done based on this logic (transaction OMRW, ERD setting = blank). For example: Goods Receipt amount is $100 and the posting is made with exchange

  • My HD appears to be corrupt how can I repair it?

    Hi, I tried to download "Mavericks" inorder to upgrade my PC,After complete download it would not load it onto my HD as it said that the HD is corrupt. Is there any way to repair it? or do I need a new HD? Thank you

  • Where is new safari 5 update apple?

    I have tried all of the fixes for safari 5 not opening pages and none are working. Apple must know by now that we need an update and hopefully it will come soon. I have thrown away plists, cache files, I dont have the third party things, reset safari

  • Member load error from EIS

    I'm loading data into essbase from eis. After member load following error is given EssbaseAPI: You have been logged out due to inactivity or explicitly by the administrator. When I try the same thing using user 'admin' it works fine. but the error is