Transportation mode from Sea to Air(AFS route determination)?

Dear Gurus,
1. PO is created and the ex-factory date in PO is 19th Dec 2010 and
2. Delivery date in PO is 27th Jan 2011 and now, the transportation mode is by default coming as ZS(Sea) through AFS route determination process.Now, user is trying to change the transportation mode(ME22N txn) from ZS(Sea) to ZA(Air), it does not change always and if it does some time,
3. then the transportation mode will again restores back to ZS but the
4. planed delivery time changes to ZA value thereby causing Inconsistency between transportation mode and its value.
Please help to solve this issue ASAP.

thanks...

Similar Messages

  • Transportation Group and Shipping condition fields in Route determination

    Hello Guys,
    Please, I heard that if I leave Transportation Group and Shipping conditions field empty Route determination would consider whatever value I put in Material/Custumer Master.
    But the determination just happen if I put the exact value in either the determination and the Material Master for Transportation Group field for example.
    Have you ever determined Routes leaving the fields empty?
    Thank you,
    Regards,

    Hi,
    Those fields Transportation Group and Shipping conditions available in Route Determination are essential to trigger the correct route in Sales Order level.
    If blank the available routes need to be picked manually at Sales Order level.
    Kindly check .
    Regards,
    SRK

  • User exits for route determination in Sales order & Deliver creation

    Hi Gurus,
    I need to do some change in the route determination for both sales order & Delivery creation.
    Can anyone suggest me which user exit I have to use.
    Appropriate answers will be awarded.

    Hi,
    You can use the following exit for route determination - EXIT_SAPL0VRF_001.
    The FM documentation is below. Check the functionality:
    "The customer exit can be used for customer-specific route determination or to modify the inbound data for the company's own route determination.
    The following data is transferred to support customer-specific route determination:
    I_VBAK current order header (for route determination in sales order)
    I_VBKD order business data (for route determination in sales order)
    I_VBAP current order item (for route determination in sales order)
    I_VBPA current sales partner
    I_LIKP current delivery header (for route determination in delivery)
    The following data can be modified and transferred back to the standard route determination or used for a specific route determination:
    C_ALAND Country of departure
    C_AZONE Departure zone
    C_LLAND Destination country
    C_LZONE Receiving zone
    C_VSBED Shipping condition
    C_TRAGR Transportation group
    C_GRULG Weight group
    C_FLAG_GEN_VT Flag: Route determination with generic shipping
    requirements/transportation group.
    C_FLAG_INCR_GRULG Flag: Increase weight group if no route
    If you want to use a standard route determination with different parameters, trigger the exception 'CONTINUE_WITH_STANDARD'.
    In the log table C_PROT, the log data from the customer-specific route determination can be transferred back. In this case, the log entries always refer to customer-specific messages. To add a message to the log table, the function module SD_ROUTE_DET_LOG can be used (see below).
    If a route is determined in the customer-specific route-determination, it can be transferred back in the E_ROUTE field. If no route was found, the exception 'NO_ROUTE_FOUND' is to be triggered."
    Thanks.

  • Can't get Transport Mode to Work

    Just messing around in a lab with a few routers. Trying to bring up transport mode first on an IPSEC tunnel. All seems correct, but it constantly comes up in Tunnel Mode. I can't see why?
    Can anyone see anything obvious?
    Enclosed are configs and a WireShark capture of the output - as you can see it's Tunnel Mode - and not Transport.
    The output of "show crypto ipsec sa" demonstrates the fact that its Tunnel mode.

    Thanks for the reply Rick.
    The access list is a catch-all :-
    access-list 100 permit ip any any
    It's a strange one to grasp really.
    "traffic to be protected has the same IP addresses as the IPSec peers "
    My routers are peers - 192.168.1.1 & 192.168.1.2
    If i ping from .1 to .2, or .2 to .1, in my mind this represented "the same IP addresses as the IPSEC peers". Other than the ping, i don't know how i can simulate peer traffic that would come up in transport mode. Do you?
    Once the IPSEC link is built, and it's a tunnel link, i don't think it will ever divert away from this and create a separate transport mode link, so all traffic will ride across it.
    It's not a big deal i suppose. Router to router connections don't seem to support transport mode.
    I know how the packets would look like, which is the most important thing really. The headers are just in different positions.
    Thanks again for taking the time to answer Rick.

  • Ipad will not connect to my air extreme router but my IMac&air mac will

    Ipad will not connect to my air extreme router but my IMac&air mac will

    The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
    Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
    Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
    If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

  • I have a new Macbook Pro - trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between the two.  I follow the directions but the two computers never "discover" each other.  WiFi connect works but 70 hours is a rough deal.

    I have a new Macbook Pro.  Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
    I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
    (Mac OS 10.8.2 on both computers)

    Are you trying target disk mode?
    http://support.apple.com/kb/PH10725
    Ciao

  • How to get rid of the other from the MacBook Air Memory?

    How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

    About “Other”:
    http://support.apple.com/en-us/HT202867
    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Backup your computer.
    3. Empty Trash.
       http://support.apple.com/kb/PH13806
    4. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    5. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    6. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409
    7.Try OmniDiskSweeper. This will give the storage size details of the items.
       https://www.omnigroup.com/more
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Be careful. Delete only the files that can be safely  deleted. If you are not sure about any file, don’t touch it.
    8. Move iTunes, iPhoto and iMovie media folders to an external drive.
        iTunes
        http://support.apple.com/en-us/HT201562
        iPhoto
        http://support.apple.com/kb/PH2506
        iMovie
        http://support.apple.com/kb/ph2289

  • TS5150 I got my Apple TV a year ago as gift. I was mirroring from my Macbook Air ok until today.  I can mirror video but the sound stay on my Mac.

    When I use Airplay, I can mirror video from my Macbook Air but there was no sound from TV (the sound on my Air still on).  I had use my Mac to do Airplay for six months without problem until now. My wife can use her iPad-4 to watch TV with Airply fine without the sound problem.  My Macbook Air was purchased in summer of 2011 running Marverick at the moment.  Can you help?

    Welcome to the Apple Community psalay.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
        2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
        3.    Restart the Apple TV (Settings > General > Restart).
        4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        5.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        6.    Restart your mobile device.

  • Is there a way to share internet content from my Macbook air to tv?

    Is there a way to share internet content from my Macbook Air to my tv using apple tv?

    It should appear. Are you using OS X 10.8.4 "Mountain Lion"? That and the presence of an AirPlay device on your LAN should be all that is required. Read the troubleshooting steps in Troubleshooting AirPlay Mirroring later in that same document.
    Your router may be an obstacle. What is its model number? A newer model, or a firmware update for it may be required.

  • HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?

    Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?

    Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it

  • Transport request from one server to another

    Hi All, We have two servers AB1 and AB2. We would like to transport request from client 101 (AB1) to client 110(AB2). How do i make transport route between these two servers. Thanks, Sam

    Hi Sam,
    You need to configure Transport Management System between these two system by following Configuring TMS - Software Logistics - SAP Library and by considering below detailed steps:
    1. After SAP Gui installed. (Development system is always domain controller.)
    2. Logon to Client :000User: DDIC.Pwd: ******
    3. Put a T-code (se06) in the command field
    4. Click standard installation and click post installation (yes)
    5. Put a T-code (STMS) in the command field and give a description then save it.
    6. Click System overview push botten, click extras option from the menu and click Distribute and activate configuration. (Yes)
    7. Back to the stms main screen and click Transport routes from the push botten
    8. Click Configuration button from the Menu.
    9. Click Distribute and activate from the configuration menu.
    10. Now your sap system is activate in domain controller.
    11. Now logon to QAS system.
    12. Client: 000User: DDICPwd: ****
    13. Put a T-code (se06). In the command field.
    14. Click standard installation and click post installation (yes)
    15. Put a T-code (STMS) in the command field.
    16. Click other Configuration push butten in the bottom of appear screen.
    17. Give information about development system.
    18. Then save it. OK
    19. Now QAS is waiting for include domain controller.
    20. Logon to Development system.
    21. Click system overview push butten.
    22. Click sap system from the menu.
    23. Select the QAS systems.
    24. Click Approve butten from the sap system menu.
    25. Now QAS is member system of domain Controller.  (Development system)
    26. Suppose if you want configuring Production also, following the same step in the QAS.
    Also you can follow links SAP Basis Tutorials/ Training: Transport Management System ( TMS ) Configuration In SAP Step By Step With Snap Shots
    Hope this will help you.
    Regards,
    Gaurav

  • Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • LAyer 3 to Layer 3 LWAPP Transport mode

    Has anyone moved from layer 2 to Layer 3 transport mode?
    I want to see if it is easy as changing the transport mode on the 4124 controller and assigning an IP address to the AP.
    Thanks!

    Pretty much it's that easy. You will also have a new interface on the controller after it reboots. The interface will be an AP-Manager. You need to assign this interface an address in the same subnet as the Management interface. After that, you will also need to either set an IP address on the AP's and specify the system name of the primary controller, or setup a DHCP scope for them, and specify the Option 43/60 so the AP can find the controller.
    Here is the link to the Upgrade guide that references the option 43 information.
    http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp125304
    Also, the document is a bit lacking, it does not tell you what the VCI strings should be for all of the AP's, so here they are.
    Airespace/Cisco 1200/1000
    Airespace.AP1200
    Cisco 1200/1230
    Cisco AP c1200
    Cisco 1240
    Cisco AP c1240
    Cisco 1130
    Cisco AP c1130
    Let us know if you need any more assitance.
    Here is another document, that is a little more tuned towards an IOS DHCP server, and it does have the VCI for all the AP's.
    http://www.cisco.com/en/US/products/ps6548/products_installation_guide_chapter09186a00807158ec.html

  • CHARM error - No Target system for Normal transport generated from another client

    Hi Gurus,
    This is regarding normal change. We have two clients in development. (Workbench and Customizing)
    We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
    But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
    I attached some screenshots related to this.
    Can you please help how to add a target system for another client of development ?
    Regards,
    Salman

    yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

  • Is it possible to start intel mac in target mode from ppc mac ?

    Hello all,
    Is it possible to start intel mac in target mode from ppc mac ? If so does using target mode make ANY change at all to the target disk if user doesn't voluntariliy write stuff to target disk ?
    Thanks in advance !

    Yes, you can, but with some notes. Braby sent some data, I add some other.
    Target Mode has two basic roles:
    1. to turn a mac into an external drive and/or external optical drive (if it has one, until Air era, all had); you may use this way if your internal optical drive is damaged and you wish to use the optical unit of the other mac; or use it as a simple external disk for backup purposes or else.
    2. to boot from a such-booted mac.
    #1 is usable with any two macs disregarding whether they are both PPC, both intel, or combination PPC-intel, as the behavior is like any external disk drive or external optical drive.
    #2 is impossible if you want to boot the other mac, they must be both intel or PPC, as you cannot use an intel-based mac as a boot mac for the other ppc-mac, and vice-versa.
    So said and clarified, you may use, but not if you intend to boot the other one if you wish to use it for various purposes implying boot.

Maybe you are looking for