Transportation of Datasouces from BI DEV to BI QAS

Hi all,
We have been facing some troubles while transporting from the BI DEV to BI QAS side .Our R/3 DEV source system is IED200 and R/3 QAS is IED400. I have trasnported all respective datasources from R/3 DEV to R/3 QAS , replicating the same on the BI QAS side.While Transportation of the datasources from BI DEV, its throwing back and RC=8 error . Its states that the Source System IED200 does not exist. Can you please suggest what is the next step that is to be taken ?

Dear Prathibha Pillai,
Maintain source system conversion in Quality system.
RSA1 --> Transport Connection --> Conversion(see button)
Maintain new entry:
Original Source system Target Source System
IED200 IED400
Then re import.
Hope it Helps
Srini

Similar Messages

Error While transporting Crystal Reports from BW DEV to Quality System

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

Error while transporting Crystal Report from BW dev to Quality system.

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

Cannot Transport Datasource 0BBP_BPART_BUYID_ATTR from CRM Dev to CRM QA

Dear Experts,
I goto RSA 6 and select the Datasource 0BBP_BPART_BUYID_ATTR.
I then goto Object Directory and set the development package. It creates a new request which can be seen in SE09.
I have not yet released this request.
I now reselect this datasource in RSA6 and click on Transport Icon. No new request is created and the logs show:
The even-numbered length of the DEC field MEM_HOUSE can lead to problems
Message no. R8569
Diagnosis
You want to use the field MEM_HOUSE in the extract structure for DataSource 0BBP_BPART_BUYID_ATTR. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
Procedure
This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
More information and a remedy can be found in SAP Note 641744.
I have not made any changes to this Datasource. It is the standard one.
Since no new request is created, this datasource cannot be transported.
Any ideas or solution???
Thanks and BR,
Raj Jain

Hi Raj Jain,
Goto se03 in the CRM system -> Change Object Directory -> type in R3TR OSOA and enter the object 0BBP_BPART_BUYID_ATTR and execute. Assign the package and it should prompt for a transport request.
Bye
Dinesh

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Transport Error from BI Dev to BI Production

Hi all,
I am started the BI transport from BI dev to BI production. we are not having BI quality.
I am transporting the DSO and the total data flow to the production.
I have copy the 0FIAR_O03 DSO to the Z DSO and i am transporting thr Z DSO(ZFIAR_O3) to BI production.
While transportation i am getting below error.
DataSource 8ZFIAR_O3 does not exist in source system EBP740 of version A |
Reading the Metadata of ZFIAR_O3 ...
Creating DataSource 8ZFIAR_O3 ...
Application component DM of DataSource 8ZFIAR_O3 does not exist
Error when creating the export DataSource and dependent Objects
| Error when activating DataStore Object ZFIAR_O3
Please suggest.
I have transported all the objects propely.
Regards,
Macwan James

Hi James,
This issue could be because the Application Component hierarchy might not be installed in Production System.
Collect the Application Components and transport to Production. Then reimport the failed request, should resolve.
Regards,
Chathia.

Error while transporting Dimension Members from Dev to Quality

Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambika

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Error when transporting Webservice from our DEV system to QA system

Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service. This was created in our 030 client of DEV. I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice. I then transported the webservice to our DEV 200 client and all worked well. Next I transported both to our QA box, first the vi/Service transport then the webservice transport. This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign. Is there a trick to transporting this webservice to different systems?
I def award points for helpful answers
Cheers
Devlin

hi,
I had this problem once and in my case the service wasn't activated in SICF.
so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
anton

Transport of mitigation controls from GRC Dev to GRC Production in 10.0

Hi All,
Is there an option to transport mitigation controls from Dev to Prod in 10.0. Where is that option available. We could not find even download or upload option unlike 5.3 in 10.0
Thanks and Best Regards,
Srihari.K

Hi
I can see that this question is marked as answered . Could you please update what steps were taken for transporting mitigation controls? Thanks
Best Regards
Srilakshmi S

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Transports from BI Dev to BI QA

Hi Frinds,
In general what are the transports in the BI Dev environment which should be moved to create a BI QA client ? Any inputs greatly accpeted .
Thanks in advance,

Hi
Before importing a transport; we should make sure the following:-
1)     You have a request from the development team with a CID attached to the related CR (Change Request)
2)     You have done all pre-transport manual actions.
3)     There is no modifiable transport in the system (Except Dev. Boxes.)

Is it possible to transport an object from Production to DEV?

I have some queries and workbooks in Production that I would like to archive. I have not been able to find a method to archive, so I am wondering if I can transport the queries and workbooks from Production to DEV? I realize the queries may not execute, but so long as I can open them up and see their definitions in DEV, I will be satisfied.
I know this sounds a little bizarre, but is it possible to transport anything from Production to DEV?
Thanks!

hi
Yes. its possible but its not recom
you can set in production system to allow changes to obj rsa1->transport connection->click 'object changeability', and look for object type , and set to changeable.
pls refer these below posts
transport a query backwards, from production to development
Re: Transporting Process Chains from Production DOWN to QA and Dev
assign points if useful.....
Shreya

Transporting module pool program from sand dev to dev system

Hi,
Can any body tell me how to transport module pool objects(including screens) from sand dev to dev system rather than manually with in the same client.
regards,
prasad reddy.

Hi
Go to Screen painter and give your program name which you wanted to transport.
Go to --> Object directory entry and there enter Development class and press enter then it will ask for request,. create a request accordingly.
Then you can release the sub task and give the main request to your Basis person to move it to target system.
Regads
Suresh

Transportation of Datasouces from BI DEV to BI QAS

Similar Messages

Maybe you are looking for