Transportation of Org. modle

Hi Experts,
Can any one tell me how I can transport Organization model form Development server to Quality server.
Thanks and regards
murali krishna

Hi Murali
Use transaction code SE38 , & give program name :RHMOVE30
Rewards Points if it helps you
Regards
Arun Kumar

Similar Messages

Transporting a Org Unit to QA

Hello All
We're about to upload our WF to QA, and I've set all the WF definitions and rule to a transport package, but I want to know how can I do the same with my Org Units. I've searched about this and cannot found any info.
Regards.

These aren't usually transported because the organization is maintained in production.
You can use report RHMOVE30 to transport an org structure manually, however I usually find it quicker and easier to just recreate the structure if it's not too big.
Cheers,
Mike

Transport of org. structure

Hi
When I transport an org. structure the user assignment is overwritten with empty entries in production.
Normally I'm making the org. structure in DEV with out user assignment.
Releasing it to TST where I allocate some test users and then release it to production.
The last transport I moved into production made the wished changes to the org. structure but I also cleared all user assignments (just like in DEV).
I know there is a table where you can set whether you want to transport the user assignment - but where do I do that?
We are on ERP 2005 without HR.
Thanks.
Regards,
Henrik

Hi Henrik,
I am do not know where the entry is you mean, but if you don't assign users in DEV, then no user assignment will be transported as you always transport from DEV. So any users allocated in TST will not be transported.
Regards,
Martin

Transport of org.units and structure

Hi all
I know there is a possibility to transport org.units and its structure (PPOMA_BBP). There are some settings to do in table T77S0 (key = TRSP.CORR) and 2 reports RHMOVE30 and/or RHMOVE50 to be used depending on the setting done in T77S0.
It is also required to configure ALE distribution model with IDoc type HRMD_A.
My question is: what do I have to include in the filter? What are the relevant info types to be replicated via ALE?
We're on SRM 4.0 with SRM Server 5.0 SP08. We don't have HR module in SAP R/3 in use.
Thanks anyone for some help regarding this one!
Kind regards,
Renaud

Hi Renaud ,
Yr business card does not carry ID.
PL. mail me to have a detailed doc on yr question.
[email protected]
BR
Dinesh

Transport Whole Org Mgmt Structure

Hello,
We're using the Organizational Management Stucture to assign roles to users (through positions assignments, etc). We normally do this from DEV and transport each change to PRD through QAS. We recently upgraded from 46c to ECC6 and we lost synchronization of the Org Structure assignments between PRD and DEV. I wonder if it's possible to transport the whole Organizational Management Stucture in one shot to resynchronize it. I searched in vain.
Any help appreciated.
Thanks,
Martin.

Hi Martin,
You may want to look around in the HR (-related) forum(s) for further answers. Or talk to the basis guys about transporting table contents.
The org structure is held in two tables (HRP1000 and HRP1001) which can be transported.
Jurjen

Transport of Org. model

Hi,
I have huge organizational model.
I have created whole organizational model in CRM Dev server, now I want to transfer whole org. model to Quality and then to Production.
Some one can explain me how to transort the oragnizational model.
regards,
Dhanraj Dange

You can use report <a href="http://help.sap.com/saphelp_crm50/helpdata/en/7f/a3c297663911d194ab0000e82dec10/frameset.htm"><b>RHMOVE30</b></a> to transport the organisational model from one client to another one.
Menu path:
Architecture and Technology > ABAP Workbench > Development > Workflow > Environment > Organizational Management > Tools > Data transfer > Manual transport

Transporting CRM Org Model

I have a simple Org model with only one sales org/distribution channel/division but I need to ensure I protect the dependencies on Sales Org ID that exist in various condition techniques that I will tranport from the Dev system.
I believe I have to a) set object lock in target system, b) run report RHMOVE50 to add new or changed org models components to my transport c) transport to target system and d) run report HRALXSYNC or CRM_COM_ORGMAN_BUPA_INTEGRATE to generate the required BP Org Units

Hi Naaven
You have to create a Number Range and Business Partner Group for organizational units.
The ID of the Number Range and BP Group have to be the same for example "Z1".
Then you have to go to IMG >Customer Relationship Management>Master Data>Business Partner> Integration Business Partner-Organization Management> Set Up Integration with Organizational Management.
Enter de Following values:
Group     Sem.abbr.     Value abbr     Description
HRALX     HRAC     X     Activate HR Integration
HRALX     OBPON     ON     Integration O-BP Activated
HRALX     ONUMB     2     Business Partner Number Assignment (Org. Unit)
HRALX     OSUBG     Z1     Business Partner Subgroup (Organizational Unit)
Hope this helps
Sussie

CRM ORg Modle Replication

Dear Friends,
Can any1 give me clarrification please??
Do we have to make some settings to be able to replicate Org model?? I see some customising steps bleow but i don get why and when they have to be used....
Enhanced Back end Integration version of CRM Model
standard back end integration version....
and also Convert org Model to represent R/3 multiple assignment
copying r/3 sales structure
Can any1 please explain me??? thank you so much !
Best regards,
Lata.
[email protected]

Hi!
1º) The first think is to decide if you need the multiple assignment in your CRM system, in the sense of that the same organization can be assigned to different organization units. You run this customizing (Convert Org. Model to Represent R/3 Multiple Assignments) if you are using an R/3 backend system where multiple assignments are already maintained in your R/3 sales structure.
Otherwise, the system by default has the standard backend integration version, where multiple assignments cannot be displayed.
2º) Copy the R/3 structure into your CRM with option "Copy R/3 Sales Structure"
3º) a third important step is to ensure that the buffering for your scenarios (SALES/SERVICE) are switched ON in table T77OMATTR.
4º) Finally, report HRBCI_ATTRIBUTES_BUFFER_UPDATE has to be executed on a
regular basis, mainly after the first R/3 structure and every time you make a change in the R/3 structure----> see documentation of this report
I hope this information can be useful for you!

Sales Org Structure Transport

Hi,
Guru's
How can we transport the " Sales area " structure from Dev to Qlt server ?

Hello Mr. Gupta,
You can transport CRM Org Structure from Development to Quality using a Report RHMOVE30 (T COde SE38)
Use below details
Plan Version = 01
Object type = O ( Transporting Org Units) Select S = Positions
Object ID: Org Units For Object Type O & Positions for Object Type S
Transport: Task . Give the Customizing Transport Request Number & Tick on Transport Objects
After Executing Save the Org Structure.
Then import the Transport request into Quality.
Best Regards,
Rajendra Sonawane

Maintain "Determination of Pricing Procedure" with different sales orgs. ID

Hi experts,
We have different sales orgs. ID for some of our sales orgs. in our Development/Quality/Production systems. When we maintained the "Determination of Pricing Procedure" in Development system for our new company and transported it to Quality system an error occurred. The sales org. ID we maintained in D wasn't available in Q. So we still have the same problem in Q as we had before. I have noticed that we have different ID for another company in our CRM system but it seems that someone has maintained "Determination of Pricing Procedure" manually for each system without any transport even if I don't think that's possible, but it look so. See pictures below:
Development system:
Quality system:
O 50000125 in D is the same as O 50000075 in Q. This is working fine, but I don't know how you change it manually in Q as it seems to have been done in above picture!?
O 50000178 in D is our new company. After transport to Q the same ID with the same values are transported correct. But the ID for the company in Q is O 50000150. So of course we still have the same problem in Q that we had before the transport.
Does anyone know how to solve this? I guess you can't just change things manually in Q or is the correct way to do?
Thank you in advance.
Best regards,
Hannes de Richelieu

Hello Hannes,
this really is a common issue. Org-Model can be maintained in every client and as the IDs are generated they can differ even if only the sequence in which you created the units is not the same in D/Q/P.
What you might be interested in is report RHMOVE30. It is used to "transport" the Org-Model between Clients. Have a look here: http://scn.sap.com/thread/3537400
This way you maintain the model once and distribute it across systems. My advise would be to take the one you have in P and refresh D and Q from it. You are still able to make adjustments in D and Q for testing. After a certain timeframe I would then refresh D and Q again to get them in sync.
cheers Carsten

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

Extend Object in Org model to add Business Role

Hi All,
How can I extend Object in Org model to add Business Role(e.g Sales Manager)?
Thanks

Hi Ashley,
If you right click on org unit select create option.
Select position & create the position you want to create.
You can transport the org unites & positions thru SE38.
Use programme RHMOVE30
Select
Plan version 01 Current plan
Object type O Organizational unit ( S fopr positions)
Select "tanport object" fo Transport screen.
You will be able to create the request.
Trust it clarifies doubt.
Reward if useful.
Thanks,
Rahul

Problem replacing Org Unit

Hello gurus!
I've got a problem transporting an Org Unit to QA. Previously I've transported a preliminary version of the organizational structure, and now there are some changes. I've moved them with RHMOVE30 but in QA there are no changes and the old Org Unit remains.
Regards IA
Armando Miranda

Hello
I did it in Dev, but in QA I have no authorization to do this. The execution of SWU_OBUF is in QA after the transport?
Regards
Armando Miranda

Org.structure differs on dev and production

Hi,
I'm developing a workflow and in one of the steps (activity step), I assign agent using organizational structure (position from HR). The problem is, that the org.structure differs on dev system and on production system. Mainly the IDs of position posts differ. How to solve this? Thanks in advance.
Best regards,
Tomas

>
Tomas Linhart wrote:
> thanks for answer, I guess that's the best way of handling such situation. I'm going to creat custom table holding position used in workflow mapped to real position ID from org.structure. Or more generally, holding WF post mapped to org.structure type (position, job, ...) with corresponding ID in org.
I don't see why you need a custom table?
The org issues aside, all that is needed is to assign your org unit to the task. Then leave the agent assignment blank in your WF. Job done.
The other option is to create a dummy rule, which you thought was to be avoided. I don't agree, it takes 5 minutes, less effort than a table, less non-standard stuff ==> less explaining to people how to maintain & easier to troubleshoot.
Edit: Forgot to answer your other question
> I'm not sure if you consider org. replication the same as transport of org. I was thinking of transport myself, just didn't know the way how to. I've found transaction RE_RHMOVE30 (also acessible from customizing), that should do that, but am not sure, if that's the right one and/or what options to select when transporting. Also, I'm not sure if this would ensure the position/job IDs are the same on both systems.
Replication would be carried out via transports. The RHMOVE* reports can also be used, or you could even set up an ALE connection between DEV and PRD. However I still would not recommend it. The development system is where you would need to create test users and/or org units. The other alternative is to have a master data client. All of these are a great deal of work which only make sense in certain types of environments - certainly not for the sake of a workflow.
Edited by: Mike Pokraka on Sep 27, 2009 9:52 PM

I need transport organizational structure from QA to PRD

HI everybody!
I need to transport the organizational structure,
I ordered the Tcode RE_RHMOVE30, the release without problems but when found in the tail of I transport the sample.
Wanted whether data within the directory or file cofile the order and not displayed.
Any help I can give will be welcome.
Thank you

Dear Manuel,
You can use PP02 to record using LSMW for transportation of Org object. But we have created the Org structure directly in Production.
Good Luck.
Om.

Transportation of Org. modle

Similar Messages

Maybe you are looking for