Transportation probelms with objects

Hi
most of objects we installed bsuiness content, and migrated to 7.0 and amde some enhancements and moving quality each time request is getting failed like some objects are inactive for each module. its defficult to check each object ( char and its contain attributes are active ior not)
is theer any process i can check while collecting what are objects are inactive?
2nd probelm is
i replicated all datasource from ecc quality to BI quality
then i am sending migration an dactive version of datasource to BI quality
i am collecting all flow. why while transportating again data source is going source system for replication process?
any setting we need to adjust, bec its taking long time
ple let em know

Hi,
1. First you check all master data InfoObjects are Active or not?. Eg: take 0MATERIAL and check all Objects with in that i.e. Attributes, NaviGational...are active or not?. In this way you collect all InfoObejcts Information in one Excel sheet and then Transport all Ativated InfoOBjects to BI Qty.Then you send all Cubes/DSO's and so on....
2. First you Transport the datasources from ECC Dev to ECC Qty and then Replicate all DS'S in BI Qty system and then You transport the Transfer/Update/Tranformations/DTPS from BI Dev to BI Qty.
Thanks
Reddy

Similar Messages

Broadcasting scheduling settings not transported along with object BRSE

Hi ,
I transported object BRSE (broadcasting object) with the Transport Connection (RSA1 transaction) from development system to the test one. I also transported previously the object TMPL (the Web Template in which I customized the broadcasting).
The transportation was succesfull, everything was transported Ok except from the broadcasting schedulling settings. I really don't know why?
I'll appreciate any help on this issue.
Best regards,

Hi Alex and thank you for your answer.
The transport log shows this warning:
Event ZSICO_LDM (DC) does not exist; registration of setting Z_ENVIO_QUERY_RECONC_RC deleted
Broadcast setting Z_ENVIO_QUERY_RECONC_RC activated successfully
We don't created any event manually, so we think that ZSICO_LDM is an event that was automatically created.
Z_ENVIO_QUERY_RECONC_RC is our Broadcasting scheduling that sends a query by e-mail.
Now we can see Z_ENVIO_QUERY_RECONC_RC on RSA1 -> Metadata Repository finding the query, but when we open the broadcast settings for this query, it does not appears.
Do you know why?
Thanks a lot.
B.R.

Transport documents with object

When I add a document to an object (i.e. process chain) then it appears that these documents are not transported from DEV to PRD. Is there a trick to transport documentation along with the objects?

Hi T. Jans-Beken,
documents attached to info provider, info object or queries can be transported via transport connection.
However, this function does not support documents like "document for navigation status" in web query -> so called "navigational state". It seems the document type in your case belongs to this as well.
You can try to transport these document manually:
A document has assigned to IDs, the locical and physical document ID (in RSA1 -> documents ->...right click on the document -> properties -> technical information..)
These numbers can be found in the table TADIR:
R3TR SBGL <LOIO ID>
R3TR SBGP <PHIO ID>
If you put this two objects on one request, the document should be transported to your target system.
Hope it helps!
Regards,
Lilly

Transporting error! While transporting Number Range Object

Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
<b><u>Error Log Detail.</u></b>
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
Anand

Hi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR.

How to transport the report object from development clint to quality clint

any body knows different ways of transferring report object from development clint to quality clint.pse send ...

Hi..
LSMW:
There are 2 ways for transporting LSMW data from a system to another.
Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. LSMW -> Extras -> Export project
Transport request with this method, you can transport a LSMW project in full (you can not select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. LSMW -> Extras -> Create change request
Program variants
If you have several program variants in a development system that you want to transport, use the following method to transport them:
Execute program 'RSTRANSP' (via se38) and inform the program and/or variant names (you can transport variant of several programs in one shot).
Layout
In some transactions, one can save layout of the screen (sort, filter, ... criteria).
These layouts can be transported: In the required transaction, when your layouts have been saved, go to Settings -> Layout -> Layout Management. Select the desired layouts and go to Layout -> Transport... There you can add your layouts in existing TO or create a new one.
Database data
In some unusual cases, you might have to transport data of a SAP table.
Go to transaction SE16, select your entries and go to Table entry -> Transport entries. It's only possible for some tables...
If you cannot do it that way,you have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list.
Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TABU
Object name = Name of your table
Double-click on the created line and, depending on your need, put '*' in the key field or double-click on it and select the key you need to transport.
Queries
Queries, datasets and user groups can be exported/imported between the systems using the Program RSAQR3TR.
Report template (ALV variants)
There is a button or somewhere in the menu Change/Select/Save/Manage Layout.
Go to Manage Layout, than Layout menu/ Transport.
SAPSCRIPT Files Transport
Use the program RSTXSCRP to upload and Download the SAPSCRIPT files to different systems
Transport SAPSCRIPT
Use the Program RSWBO052 to create the Transport Request for a SAPSCRIPT, In the Selection screen of the program, give R3TR FORM Give the Form name and press Execute button, it will ask the Development Class and the transport Request No.
Standard texts
Standard texts used in SAPScript(created with transaction SO10) can be included in transport orders. You have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list. Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TEXT
Object name = TEXT,,ST,
Example :
R3TR / TEXT / TEXT,YMM_MEDRUCK_MAIN_16_EC,ST,F
Reward if useful
~Lakshmiraj~

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

Unable to transport Integratin Builder objects from Dev to QA correctly

Hi,
System : Pi 711 SPS03
SLD 7.1 with latest model and content
We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
The interface is being imported as the source SID.
We checked the SLD configuration for Transport targets, that is when we realised the below issue.
Unable to Assign Business Systems in respective Business System Groups
The expected configuration of the SLD is as below:
UKD_400 - Integration Server for Dev PI 711 server
INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
XI_QA - Business System Group for all Quality Systems in the landscape
          1) UKD_400
          2) UC1_ECC_60
          3) UED_400
XI_DEV - Business System Group for all Developement Systems in the landscape
          1) INTEGRATION_SERVER_UKQ
          2) UC2_400
          3) UEQ_400
We are unable to put the business systems in their respective groups
All the Business systems are either being assigned in XI_QA or XI_DEV
Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
Thanks,
Govind
Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
   BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

Transport of config objects...business system prblem...

Hi Gurus,
We want to transport dev and config objects from XI qua to a XI test server... we hav successfully transported all design objects...but we are facing problem while transporting the config objects because of business and technical system issue....the business system in quality points the ECC quality....how can i tranposrt the config objects with same business system name....is there any way??
Thnx in advance...

Hi,
This will be Maintained in SLD .You know what will be Business system name in Quality or Production.
While Creating Business system you need specify in the Transport Tab which is your Target Business System and also the Group like Production or Quality ,
When you do transport from Development and for the Dev_Bs (Bussiness system ) if you assign the Qaulity System Bussiness system ,it automatically move the object under Quality Business System.
if this setup is done in SLD when you do transport the Configuration Object It Automatically assigns the Quality and production Business System if you are doing Transport from Dev Respectively.
hope this helps.
Thanks,
Madhu
Edited by: Madhusudhan Honnappa on Sep 3, 2009 8:11 PM

Transport Layer and Objects

what is the relation between the objects of a transport request and the layers in a transport domain?

Dear Abhishek,
First of all a I have to explain packet:
Packet
A packet groups Objects of the Development. Any report or table or data element … belongs to a packet. So every repository element is connected with a packet.
Transport route
A transport route describes the direction a transport can be transported. For example if you want to transport a transport from development to a test system, you have to configure in TMS a transport rout from development to the test system.
Transport layer
A transport layer connects packets to transport routes.
The connection between packet, transport route and transport layer is:
Objects of Development (Programs or Reports or Tables …) <-> packets <-> transport layer <-> transport route <-> systems
If you develop a report in development system and want this report to be transported to the test system you need:
-to connect the report with a packet.
-to connect this packet with a transport layer
-to connect this transport layer to the transport route that is connected to the both system and describes the direction FROM(development system) TO(test system)
For an exact description see:
http://help.sap.com/saphelp_nw04/helpdata/EN/57/38de0c4eb711d182bf0000e829fbfe/content.htm
Best regards
Willi Eimler

Transport of ID objects

Hi,
I have a very basic doubt. As we know we have two ways of tranporting objects in PI. CTS and File system. When we want to transport the ID objects alone, i.e there are no IR objects for the scenario, can we do a file transport itself? And when we import the ID objects by means of configuration scenario, will the communication channels ger imported along with the credentials?
Regards,
Lavanya R

Hi Lavanya,
>>>When we want to transport the ID objects alone, i.e there are no IR objects for the scenario, can we do a file transport itself?
Yes, of course you can do a file transport of the ID objects where a .tpz file will be generated. You can either download the tpz file in the local system if you select 'Client' while exporting objects or in the standard server location if you select the 'Server' option while exporting through File System.
>>>And when we import the ID objects by means of configuration scenario, will the communication channels ger imported along with the credentials?
Yes the credentials and settings maintained in the Communication Channels will not be imported....so its better to uncheck the option "Automatic Activation" while importing the ID objects to in the target system and activate the same post reconfiguration of the channels..
Regards
Bikash

Transporting Change document Object from development to quality

Hi All,
I have created a change document object from SCDO for my custom table. Now I want to transport this object from development server to quality server.
As while creating Objects some enteries are made into standard table CDHDR and CDPOS which is client dependant so how to work this object on another client.
Do I need to create seperate objects on quality server and then on production server?
Thanks

Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh

How to transport an LSMW object from dev to Quality and to Production?

hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.

Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth

Problem in Transport of ID objects using CMS

Hi,
I am using CMS to transport my IR and ID objects from DEV->QA->PROD.
While I am able to transport my repository objects successfully,I do have a problem with trnasport of ID objects.Especially this problem seem to exist only if i try to export individual objects.There isnt any issue for a complete ID transfer which is not my req.
When doing "Release FOr tranpsort" from QA after making the communication channels changes,The object appears in the "assemble " tab.
Ideally Once I assemble the objects,it should diasappear out of assembly page and should be appearing in the "Approval" tab..
But the objects successfully get assembled and dispapper from assembly ,they dont seem to be present in the next approval step.I am unable to track where they are lost.CMS logs doesnt show any error as well.
Any pointers from this issue?
Regards,
Rashmi

Hi,
This will help you,
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards
Agasthuri Doss

Transport Request - Delete Object

Dear Expert,
I have a problem with two transformation in Quatility System, I don't have authorization to delete in the Quatily System. I have deleted in the develoment syste but I have lost the transport request with this taks for to do this. How can I recover the taks in Development System and create a new transport request to delete two transformation in the Quality System.
Thanks for your time,
Luis

Dear Alexander,
Thank for your suggestion, but both transformations doesn't excite in the source system (Dev). The cases is I delete both transformation in the Dev system a lost the transport with delete action to Quality System, and I can't recover these object. The other solution was created again with the same technical name isn't possible because they are transformation object, and you canu2019t set up the technical name.
I really appreciate your suggestion,
Luis

Transportation probelms with objects

Similar Messages

Maybe you are looking for