Transportation Problem development - production

Hi Experts,
We have query with transport. We have deleted some CKF's in Development and we have captured in transport id and the same we have imported to Production. After that transport ended with warning RC code 4 error . but if we check with the production few of CKF's are not deleted and few of them have deleted. And also we have checked with tranport error its shows " object also deleted in target system Corresponding TADIR entry removed. Please suggest us how to delete CKF's.

Hello,
as moderators we expect to get a few of these questions in this forum.
To clarify:
This forum is a dedicated forum for the SAP Transportation Management solution which is part of the Supply Chain Management suite of applications. SAP TM deals with logistics in the real world - moving pallets, containers, loading trucks or railcars, printing a bill-of-lading, payment of carrier invoices, exporting goods on ocean vessels.
To learn more about SAP TM please visit http://service.sap.com/scm-tm
This is not to be confused with software logistics as in transportation code or configuration entries from system to system.
I am therefore moving this thread to another forum.
Kind Regards,
Bjoern - Moderator

Similar Messages

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Proxy generation Problem in Production system

Hi Experts,
I have consumed WSDL file and created Client Proxy in development system.which is working fine
After testing it is Transported to the Quality system and Production system both.
In Quality system Proxy is generated properly and functioning properly.
But in Production system, Proxy is not generated and even in Tcode SE80 it is not displaying.
How to solve this problem?
Please suggest.
Thanks in advance.
Regards
Jagesh

Hello Experts,
After Transporting Request to Production systems, all Dictionary objects are also created but Only Proxy is not created(Not appearing in SE80 under the respective package name).
Please help me in this.
Regards
Jagesh

Binding ADF UI to a complex XML Type – Development Productivity, State Mgmt

Binding ADF UI to a complex Web Service – Development Productivity, Managing State, Etc.
For those scenarios when ADF UI has to be bound to a complex XML type, it seems that the direction taken by the ADF development team was to generate data-controls that map to complex XML types.
The major problem with this approach is the fact that application server does not manage state. For example, If application has to submit a purchase order to a web service then application server has to manage the shopping card state until its ready to be submitted.
In some previous forum threads it had been suggested that using generated data-controls is a “quick and dirty” solution for accessing web services and that a proper solution is to use generated Java Proxy Interface.
That implies many manually constructed entity objects, associations and overridden doDML methods, which is far less productive compared to entity objects generated from a database schema.
Suggestion and a Question for the ADF development team
From the logical model standpoint, there is no difference in between the XML schema and DB schema. Therefore, it is possible to generate entity objects and associations for XML Types of XML schema the same way it’s done for tables of Database schema. The only difference is serialization of CRUD operations on entity objects.
One way to handle this is:
-     Generate Application Module for a complex XML type. This application module should have methods for marshaling to/from corresponding XML type.
-     Generate entity object for each subtype within the complex XML type. In case of nested subtypes, generate association to a parent type.
-     Generate data control with actions that are bound to web service operations and code that serializes request message from corresponding AM and de-serializes response message to corresponding AM.
This way, ADF would offer the same productivity for the SOA development as one its currently offering for the ORM development.
Until the time when something like this is available, what would be the best approach for binding ADF UI to web services?
Feedback is greatly appreciated.
Boro Petrovic
Edited by: wds12518 on Jan 25, 2010 11:49 AM

We have similar issues as our big portion of the UI is based on WS. We found that there is no easy way to map entity object structure to complex XML type (one EO can based on one flat type or domain can't be bound to UI directly). Oracle PMs, is there any better solution or future plans to address this issue?

Best practices for a development/production scenario with ORACLE PORTAL 10G

Hi all,
we'd like to know what is the best approach for maintaining a dual development/production portal scenario. Specially important is the process of moving from dev. to prod. and what it implies in terms of portal availability in the production environment.
I suppose the best policy to achieve this is to have two portal instances and move content via transport sets. Am I right? Is there any specific documentation about dev/prod scenarios? Can anybody help with some experiences? We are a little afraid regarding transport sets, as we have heard some horror stories about them...
Thanks in advance and have a nice day.

It would be ok for a pair of pages and a template.
I meant transport sets failed for moving an entire pagegroup (about 100 pages, 1Gb of documents).
But if your need only deals with a few pages, I therefore would direclty developp on the production system : make a copy of the page, work on it, then change links.
Regards

Web Template Changes not visible after transport from Development to Test

Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly transported from development to the test environment, but we are still seeing the old version of the template when the report is executed. We are able to see the web template changes in the Web Application Designer in the test environment. We believe this is a caching issue and have cleared the query cache and the HTTP cache in SMICM. Unfortunately, this has not resolved the issue. Can you suggest another approach to resolve this issue?

Not sure what you mean by browser cache. We have deleted history, cookies, and all temporary Internet files. The issue isn't limited to a single user, but exists for all users. Through extensive testing we have established that you are able to see the web template changes in test in the WAD(Web Application Designer) after they have been transported from development, but can only view the changes when the web template is run for the first time. Changes to existing templates can be seen in the WAD in test, but are not seen when the report is run. The old version of the template appears to held in cache somewhere, but we haven't been able to find it and clear it.

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

Using COMPRESSION any Problem in Production ?

Hi All,
we are woking in SD application in BI7.0.
We plan to use the compression in SD application area for the Sales Cube (VBAK and VBAP), Delivery Cube(LIKP and LIPS ),Billing Cube (VBRK and VBRP ) and Shipping Cube ( VTTK and VTTS).
The infoproviders are used in the infoset.The below mentioned scenario occurs in the data loads of the infoproviders because of which decided to use the COMPRESSION:-
Sales Cube                                                                   Delivery Cube
Sales Doc        Sales Qty                                                Delivery Doc         Del Qty        Sales Doc
1                        11                                                        1                            11            1
1                        -10
1                        10
InfoSet ( Before Compression)
Sales Doc        Delivery Doc            Sales Qty            Del Qty
1                        1                            11                        11
1                        1                            -10                       11
1                        1                            10                        11
The report developed on the will show Sales Qty = 11, but Delivery Qty = 33. Which is incorrect.
To avoid the above incorrect data planned to use the COMPRESSION so that the infoset will get the data as mentioned below
Infoset(After Compression):-
Sales Doc        Delivery Doc            Sales Qty            Del Qty
1                        1                            11                        11
The report developed on the compressed infoproviders will show Sales Qty = 11 and Delivery Qty = 11. Which is correct.
Please give your suggestions that using the COMPRESSION do create any problems in the Production or is there any other way ?
Thanks in advance.
LNV

Hi ,
Thankyou for the above reply but as a precaution like to know that what are the scenarios where the COMPRESSION of the infoprovider creates a problem in Production System?
Thanks in advance.
LNV

What are the do's n dont's of transporting the development

Hi gurus,
can anyone explain me what are the do's n dont's of transporting the development and what we do to transport our development.......
Thanks in advance..
S Ram

Dear Shiva ram ,
There are no such dont in the transportation , but if its a fresh system and you are implementing then you should follow a procedure to move the objects into production , if you are installing the business content in Development as exactly to suit your requirement and then always use Install and transport option, give the request to it , and when moving it to production , first transport the objects installed and then your Objects. The Only to handle transportation is with a bit of common sense and understanding the dependencies, for eg : you cannot send the Update rules to Prd with out Infosource and Datatarget or you cannot send the Infocube without actually sending the necessary infoobjects...
So always remember the exact flow of data and transport Sensibly to avoid unnecessary hiccups ...
Hope it helps.
Thanks,
Krishna
*Assigning points is way of saying Thanks in SDN

Hierarchy transport from developement to Quality?

Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
Kiran

Hi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar

Transporting problem to quality

Hi friends,
i'm receiving a problem while importing the requests to quality. imorting is ending with error : 8 i.e object has not be over written.
but the problem is i am receving errors when i'm transporting newly developed objects. how to come over it. do i have to copy and create new one.
thank you.
kat

the newly developed objects may he link with the previous developement..
like ztable ,zstructure,etc..
check and re trasport
Regards
Anbu B

Transport/Copy Configurable Products alone with Configuration from one Clie

Hi All,
I need to transport/copy Configurable Products alone with Configuration from one Client to another. Any body who can guide me how to do it.
Thanks,

Hi All,
Problem Solved ... Closing the Post...
Thanks and Regards,
The following steps were carried out inorder to solve the problem:
1) Create the Products in target system with the same name as in Host.
2) Create the RFC Connetion "HTTP Connection to ABAP System".
3) Create a Site of Type "External Interface for XML"
4) Assign RFC Destination to the Site Attributes
5) Create Subsciption and publication for "Product Configuration MESG".
6) Assing site and BDOC Type to the Interface Type in IMG
7) Define Request object
8) Start it request by entereing the Request Name, Source Site and Target Site.

Problem in Product Update

Hi All,
I am facing a problem in product updation.I am using maintain FM to update Product in sap crm 2007. after that I am using COM_PRODUCT_SAVE_API.This API takes a lot of time to update only one set type .When I debug this API ,there is a badi FM (COM_PR_CHBADI_CHANGE_AFTER_UPD )which is used in this API is taking time.I tried to remove this badi by creating Z API to save Product but Product is not updated with new values.Please tell me any solution for the same..
Regards,
Hem

Hi Hem,
I faced this issue with CRM 5.0 couple of years back. We didn't get any solution at that time other than to update the set type tables with direct table updates.
I thought in higher versions this issue would have been resolved, but i guess not. If you find any solution, please do share.
Regards,
Shyamak

Facing an problem in production server cluster

Dear All,
I am facing an problem in production server, we are using Ecc5, windows 2003 with Oracle 9i and with the is clustering node A and node B
The problem is suddenly the sap sever get restated and the resources get move from one node to another e.g. .node A to node B but not all the resources move to one node , except the kernel drive where sap is installed it is in different node and rest in other node. At present time both the node are active.
How to move the all the resources into one node I have tried before also but my experience in not good
One time I have to recover the database and another time I have hard time to start service of sap R/3.
This time I have the same problem please suggest me how to do it in correct way and to solve this problem.
Regards,
Shiva

Hi,
This is related to virus problem. Pls check virus with latesh dat.
Anil

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Transportation Problem development - production

Similar Messages

Maybe you are looking for