Transportation zone does not exists

hi,
its urgent
plz resolve this
i have to create the bdc program so before
there is a problem in transportation zone fields in xd01 , i am give the data for particular fields but it does not exists
while am press the f4 key, it should ask the project, i dont understand further. plz tell the solutions clearly.
regards
surender
early responsers should be rewarded

As per SAP documentation,
Sales and distribution
the system automatically proposes a suitable route by using the transportation zone of the goods recipient in combination with other information about the delivery, such as the
Countries of origin and destination
Shipping conditions
Transportation group
Example
In the USA, for example, you can define regional zones to correspond to the US postal zip codes.
You can see the values for Transportation zones in TZONE table. The zones are defined at a country level.
Hope this helps. Reward points if the answer is useful.
Thanks,
Balaji

Similar Messages

Transport request does not exist in production server

I created a transport request and released it. However, the cofile and datafile are not created in production server. It supposed to appear automatically once I released, but it is not created and I was not able to add this request in the production. May I know what might be the cause? Any setting that is wrong in my development server?

Hi,
If you have configured transport route properly then when you will release request then it will automatically come in your production queue (Since you have no quality system). If transport is not coming in production queue, it means there is problem with transport route configured.
Also, check whether data file or cofile exists in transport directory or not. If there are no files then it means it is a local transport request.
Thanks
Sunny

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

'Screen does not exist' error after transported to Quality server.

I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
Please tel me what should I do to solve this issue. Its very urgent. Please help.
Thanks
Johan

Hi
You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA server?
I would suggest this:
In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
If you have trouble importing into the QA server, please provide the transport logs here.

Transport error - rsds does not exists

I getting error " Target RSDS Z_ZDDP_HISTORY QASCLNT400 does not exist" while transporting some DSO with "before" option. It is strange because:
1. data source Z_ZDDP_HISTORY DO EXISTS in QAS system!
2. it is also exists on ECC side
3. the option "conversion of logical system" is checked

Hi,
As Mansi said, you need to make sure that you transport Active datasource from ECC and BW end as well. After ECC transport perform Replication in BW and then transport BW datasource replica.
This should resolve your problem.
Regards,
Viren

Extract structure does not exist at the time of transport

HI ,
i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis is
Extract structure does not exist at the time of transport
Long text of error message:
Technical information about the message:
Message class....... "RD"
Number.............. 041
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
please provide the solution asap

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

Package does not exist :- Transport

I transported a process chain to QA and I am trying to run that there. When I start the process chain I get an error message
"Package xxxx does not exist" ..What needs to be done,...

Hi dear,
look here:
Re: Activated infoObjects does is not visible in AWB
Hope it helps!
Bye,
Roberto

After transporting I get error "source system does not exist"

Hello all,
I have transported my objetcs to BW quality system and transported the data sources to r/3 quality and everything went fine. But now when I am trying to go through everything my update rules are inactive and when I get to infosource it gives me this error
"Source system ERJ100 does not exist."
Is there any importamnt step that I am missing why are the objects not recognizing the source system?
Thanks,

hi,
check the system mapping in rsal tools system mapping tab as lilly mention. check if the mapping is defined correct. see the link below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Might help
Thank you
Qandeel

Error in Transport... Info provider does not exist

Hello,
I'm getting an error 12 and my transport is getting cancelled due to the following message:
Infocube/Infoprovider 100481 does not exist
Error R7 791 when handling objects with type R3TR CUBE.
I tried looking for a solution. I came across this OSS note:1019764
But the solution listed is for 7.0 and i'm on 3.5.
has anyone encountered such an error and if so, what did you do to rectify this problem?
thanks
Sam

Dear Sam,
Your Error suggests that it failed in transporting the Infocube Aggregates, first make sure all your changes are in place , and if you have added some Infoobejcts in the infocube , then before creating the aggregates you have to reload the data as you might have done in the development while activating the aggregates, so if at all you have added / changed the infocube design dont forget to delete data and refill before you want your aggregates to fill in ...if atall you have not done anything of this sort, then the suggestion would be to transport the changes in a serialized way by breaking the changes..
Hope it Helps..
Thanks,
Krish

Solaris 11: configuring/installing/verifying zone: dataset does not exist

Hello all, I am working my way through setting up a dataset via the instructions listed here
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.conf.start-85.html
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.inst.task-2.html
I am now trying to verify my zone (*zoneadm -z stfsun1 verify*) and I get the following error message:
"*could not verify zfs dataset waas/stfsun1: dataset does not exist*
*zoneadm: zone stfsun1 failed to verify*"
I did a search but nothing of benefit showed up. Can anyone point me in the right direction?
Edited by: thisisbasil on May 22, 2012 9:04 AM

zonecfg -z stfsun1 info
zonename: stfsun1
zonepath: /zones/stfsun1
brand: solaris
autoboot: true
bootargs: -m verbose
file-mac-profile:
pool:
limitpriv: default,sys_time
scheduling-class: FSS
ip-type: exclusive
hostid: 80825649
fs-allowed:
[max-sem-ids: 10485200]
fs:
     dir: /usr/local
     special: /opt/local
     raw not specified
     type: lofs
     options: []
anet:
     linkname: net0
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
anet:
     linkname: net1
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
device:
     match: /dev/wifi/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/ipnet/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/*dsk/*
     allow-partition not specified
     allow-raw-io: true
dedicated-cpu:
     ncpus: 1
     importance: 10
capped-memory:
     physical: 1G
     [swap: 2G]
     [locked: 500M]
attr:
     name: comment
     type: string
     value: "This is the CodeTEST work zone."
dataset:
     name: waas/stfsun1
     alias: stfsun1
rctl:
     name: zone.max-swap
     value: (priv=privileged,limit=2147483648,action=deny)
rctl:
     name: zone.max-locked-memory
     value: (priv=privileged,limit=524288000,action=deny)
rctl:
     name: zone.max-sem-ids
     value: (priv=privileged,limit=10485200,action=deny)
Edited by: thisisbasil on May 22, 2012 9:56 AM

Transportation zone does not exists

Similar Messages

Maybe you are looking for