Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Similar Messages

Transporting form BOX to another BOX to production BOX changes not effect

Hi Expert's,
Good Day!
I would like some help from on my object from "Transporting form BOX1 to another BOX1 to production BOX changes not effect" ??
The issue is regarding transaction SE51 (screen painter). I was changing the Define Length from 45 to 55 upon activating their will be a pop-up information message will appear "Selection screen: Report generation makes screen changes ineffective". After the activation the Define Length in transaction se51 will now be 55.
However, upon transporting to another Box/system the Define Length will be 45 instead of 55. Can you help me how to solve this problem? What to do to avoid the changes in the Define Length so that it would still be 55 instead of 45?
Answer's will be a great help.
Thank you,
~Junne Ray

Hi Satya,
Good Day!
I was changing the Screen (transaction SE51) of a field Define Length from 45 to 55. the changes is transported and reflected to another box but when transporting it again to the production box the Screen (transaction SE51) the Define length changes again to 45 instead to 55.
~Thank you so much
Junne Ray
Edited by: jrvillacortz on Mar 25, 2009 6:23 AM

MY LAYER STYLES AND PHOTO EFFECTS ARE NOT SHOWING UP WHE I CLICK THE BOX, NO DROP SHADOW, ETC

MY LAYER STYLES AND PHOTO EFFECTS ARE NOT SHOWING UP WHE I CLICK THE BOX, NO DROP SHADOW, ETC,
I ALSO GET AN ERROR WHEN I OPEN THE EDITOR ONTITLECREATEWITHPARONS COULD NOT BE LOCATED IN THE DYNAMIC LINK ONCORE2DLL

Seems like the database has been accidently deleted. Browse here on how to get it back http://forums.adobe.com/thread/759100

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

Ship to party and Bill to party not reflecting in marketing documents

Hi,
Ship to party and Bill to party not reflecting in marketing documents inspite of defining it in BP Master data.why does it happen.we are on 8.8 version and this is happening in Livedatabase.
Thanks,
Mansoor Baig

Hi Mansoor,
Is this for new transactions or existing ones that went thru the 8.8 upgrade? Is this for new BP that the address doesn't show or existing (if you have other transactions with no address problem then it shouldn't be the address format setup unless something happened in the upgrade).
Heather

Ecess and S & H Cess not reflect in Excise Registers(J1iin)

Hi All,
Ecess and S & H Cess not reflect in Excise Register J1iin, only Excise duty is reflected. I maintain the conditon type for Ecess--JECS. In my understanding no conditon record for S & H Education cess.
I copied Ecess condition type and maintain the S & H Education Cess Condtion type(JEC1). i checked all the settings its ok but in Jiin register not reflect Ecss and Secondary Education cess. Plz help me.
Thanks and regards
Chandra

hi,
Please do check the T-code u r using is wrong .
it is not J1IIN to view registers
it is J2I6
hope u are doing purchase cycle not sales cycle
regards,
sujit

I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

Weird... Turned the iPad off and back on, while waiting on the line to be connected to an apple support specialist, now it works.

Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

If your model Macbook Pro is the calibrating model, let the battery calibrate.
If not, and are still under warrant or have Apple Care, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

File name changes not reflecting in library AND Nano...

When I make changes to songs(title,artist,etc) in my ipod library these changes do not reflect on my nano if those songs are currently on the nano.
For example: if I change a song name in the library, if that same song is on my nano, it will still remain the same and not make the changes itself.
I don't understand b/c on my shuffle, any time I would make a change, whether in my library or on the shuffle, the change would reflect on the other end.
If I name a song 123 in the library and that same song is currently on my Nano as 321 it won't make the change to 123 unless I do it myself again. Once in the library and again on the nano playlist. It seems whenever I make a change it should be the same no matter where the song is located. Is there a way to make the changes show no matter where the song is located ?????????

Well something isn't right. I have my shuffle connected to. They both have the same songs and once I make changes to songs that are on both the nano and shuffle, the shuffle shows those changes but the nano doesn't. The nano doesn't even after I hot the sync button. It's like the files on the nano are totally seperate files and they aren't connected to the library.
Cliffs:
I have the Nano to manual mode and I'm hitting the sync button but the changes do not take place but the shuffle does. Am I missing something?

MAS changes not reflecting in Baseline version

Hi All,
I had to do some changes to Mobile Sales application and for that in MAS I created a new project oppt (Project type: SAP Mobile Solutions and Template: Laptop Solution). I did all the changes in this new solution and they are working fine.
I released the change list and still these changes are not updated in the baseline version.
I see that the appropriate files {sfabol.dll (Business logic project: sfabol), opp.dll (UI Project: opp)} are updated in the oppt folder (C:\Program Files\SAP\Mobile\App.Net\oppt) but after I released the change list the files in C:\Program Files\SAP\Mobile\App.Net\MSA are not getting updated. Please correct me if I understood the release concept wrongly.
I need to transport the changes done in oppt project to other mobile clients, please let me know how to do this.
Your replies are highly appreciated.
Thanks for all the help.
Thanks,
Chan

Hello Chan
Since becuase you have changed the Target Folder Path from Generation settings, all your changes are refelcted in the new location. You can find more info about the Generation @
http://help.sap.com/saphelp_crm50/helpdata/en/74/7c023cfa699508e10000000a11402f/content.htm
Step 1 : Please change the target folder path to standard MSA path and Save the Generation Settings. Go to Build Menu, and click on Update project Files
Step 2 : If the changelist is still open, Do Generate Changes alone. else do a complete Generation.
Step 3: Build the Entire solution and verify that MSA.dll and SFABOL.dll have got built successfully.
Step 4 : Got to Mobile\Bin.Net folder and open the SAP Upgrade Console ( "UpgradeConsole.exe" ).
Step 2 : Click on "New" in the toolbar. This will load the wizard, which shows a set of upgrade units.
Step 3 : Select ( check ) the Upgrade Unit "Deploy UI Changes" and 'Deploy BOL Changes". Then press the 'Next' button in the wizard.
Step 4 : In the next screen, select ( check ) the application and the languages. Then click on the 'Finish' button. The Upgrade Editor will be loaded with an upgrade containing the selections made by you.
Step 5 : Enter a new name for this upgrade ( in the bar on the left hand side ) , and then press the "Create Package" button on the toolbar. This will popup a dialog box telling you that the upgrade package has been created in a specific location.
Step 6 : On this dialog box, click on the "Show Folder" button. This will open a Windows Explorer window at the folder containing the package ( .mup file ) created for your upgrade.
Step 7: Now Copy the MUP to mobile Client machine
Step 9: Now Double click on MUP file.
Best Regards
Shankar

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Changes not reflected in iWeb 08 program

I have been making changes to my site, publishing them to the web and all is fine. When I close out iWeb (and SAVE) not all of my changes are reflected when I reopen iWeb.
The published site is very fine, bu a lot of the changes I have made to the site are no longer reflected in my iWeb 08 program,

Hi,
First try to check if all the elements are in the transport rquest and then reptransport it...
If this still doesnt work, do the foloowing:
Run the prg : RSTXSCRP in Dev and EXPORT the script on to a desktop/location
Run the prg : RSTXSCRP in QA and IMPORT the script from the desktop/location specified above.
Hope this helps you
Regards
Sk

Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Similar Messages

Maybe you are looking for