Transporter details

Dear All ,
We have a transport contract created seperately for the Transport Vendor & material PO created for another vendor ie the supplier . We ask the transporter to bring the material from the supplier place (based on the Contract created) .When the GR is made for the material the transporter details like Transporter name , Vehicle No. , Work order No. , gate pass No. etc are to be entered .Where in MIGO Can we enter these details Pls suggest.
Regards,
Suresh

Also refer the links
Gate pass
Regards
Sanil

Similar Messages

Report for Transporter Details.

How to create a customize report to capture the transporters details and the quantity supplied and amount of the materials received against the PO. PO includes both the supplier and transporter.

For some clients,I have seen a custom tab set up that captures information about the transporter and the delivery. This tab is triggered while using MIGO and the data is stored in a custom table. This table can contain the list of materials that are captured in the MIGO line items. A report will read the contents of this table and display.
The following thread has information on how to create a new tab.
Re: ADD CUSTOM TAB IN MIGO
Hope this helps.
Regards,
Aroop

Problem in transporting details of wage elements of pe51 to quality server.

Hi Experts.
Here i have added some new wage elements in the windows of pe51 in Development sever.
They have added properly in the Development server.
But when im trying to transport the same to quality server,no details are going to the quality server.
Please provide the way of doing the save function.
Thanks alot.
Regards,V Sai.

Hi Experts...
Thanks for the reply.
Now it s been transported to Quality.
But some values are not adding to the particular window.
In Earings side Statstical net sub to adjumnets amount is not adding to earnings side.
In Deductions-genral window it is not showing the GPF Amount in total coloumn.
In deductions-taxes window it is not adding professional tax amount in total coloumn.
But take home pay is showing up correctly only.
Where should we modify to get the correct payslip.
Please advice.
Sai.

Transport details during GR

Hi all ,
I wanted to capture the Vehicle no ..and its relevant details during GR , is there any functionality available within SAP or there any work around
thanks ,
ksr

Hi.
If you want to capture vehical no & other stuffs of transportation & you already using all the fields in GR then go for BADI..
If your Vehical no & other details with respect single GR the use addtional Tab in Header or if these details with respect to items then add tab in item details.
Regards
S B H

Transport request prompt details

Whenever there is a modification to existing reports or new reports being created, SAP prompts for a request number to be captured. Apart from capturing the request number, I want to capture other details like technical person name, functional person name, plant, transaction code, etc. as such details will be very useful in drafting the charts like how many modifications / new reports made per plant, how many modifications / new reports done by a technical person, etc.
Is there any userexit that is called when transport request pop-up screen comes up ? Any other ideas ?
Please clarify.
Regards,
Tom Jerry.

For the transport details, please check the tables E070 and E071.
Just pass the <Program name >in the field E071-OBJ_NAME and get all the transport order details.
and also check the table TRDIR for all reports and pass the TRDIR-UNAME is username where you can get the Reports done by the person.
TRDIR for all reports and pass the TRDIR-CNAME is username where you can get the Reports changed by the person.
TFDIR where all the function module are stored
DD03l where all tables are stored.
Prabhudas

To capture Trip details during MIGO

Dear SAP Team,
I have two scenerios being in practise by my client Request that if any one can give me the solution
1. When the material supplier is not taking care of the transport ,at the time of good receipt there is one activity called "TRIP DETAILS" done by my client during GR. Details is maintaied in the "Trip details "for transporter payment like transporter name ,vehicle no, gate pass no,material, Transport Order no with the transporter .They also want during this activity the trip detail tab page must be made mandatory so that the user does not omit the relevant transporter data
2.Vendor supplies materials to the Client in two ways - One where vendor take care of the freight cost which can be tracked in PO. In second case , they arranges the transport for whom the transport contract exists based on the distance.When the GR is made for this the product cost to be captured where there are two activities for the material.( One is material supplied by vendor / Transporter.The payment is done for the two sepately
Regards,
Suresh.R

In both the cases, freight will be there. So goto M/06 select your condition type-go to details- Control data 2- here maintain Vendor in GR - 2.
This is nothing but delivery cost, you can change the vendor code (either your transporter or main vendor) during GR.
As far as other transport details are concerned, you can make the field "header Text' mandatory & use it to maintain such details.

Transport Request Tracking

Hi,
Good morning all,
here i hava one requirement regarding transport request .
How to know request target when we released it .
I.e when we released the request , it should be transport either testing , quality or
production . or both .
where should sap maintaining these details .
is there any data base table ? .please help me .
In the table E070 it is maintainig some details .
The table contains only one target details .
if a particular request is transported to more than one server ,
still the table contains only about one server .
where can i get the remaning details .
my requirement is shown below .
requestno   shorttext reldate                 qualit prod
xxxk9008767 abc       27.01.08              Y     Y
xxxk9008768 abd       26.01.08              Y     N
xxxk9008769 fgh       25.01.08               N     N
if the request is transported to quality
i have to show Y in the quality column
if trasnported to production also then Y in the
prod column .
but in the tabel E070-TARSYSTEM contains only one
target details .
i have checked for so many requests .
in the table E070 it is not showing the requests
are transported to both servers .
but in SE09 transaction it showing as
the particular request is successfully transported to
both systems .
please help me ,
Thanks in advance .
regards ,
Srinvias

Hi Srinivas,
Am not a 100% sure however how I think it works is
When you view the transport details in Development server in E070, the E070-TARSYSTEM for the request will point to QA server.
Then when the request is transported to QA, the same transport entry in E070 would be updated with E070-TARSYSTEM as Production server.
Can you check this and confirm.
Cheers.

Program to Track the Transport Request

Hi Experts,
I got a requirement to write a program which can track and compare the Transport Request between the servers(Development ,Test and Production) .
If in case is there any descrepancy between the versions (In the server) it should throw an error saying that particular thing is missing or not synchronized.
For ex: If the program which is in Development server has some structure dependent to the code which is address to single TR.
where as same version of the program in Test don't have structure ,it has to throw an mismatch error.
If you guys have any clue on this please throw some light.
Higher points will be rewarded for every useful inputs.
Thanks in Advance,
Dharani

Hi Dharani,
Some sample Code. This I got debugging the SAP Standard.
TYPE-POOLS: strhi.
Data varaints for remote compare
INCLUDE rvscdcom.
INCLUDE rsvcutct.                      "Utilities, Constants, Types
INCLUDE rsvcvcct.                      "General Constants Types
INCLUDE rsvcvdct.                      "VRSD Constants Types
INCLUDE rsvctrct.                      "Tables for transports details
INCLUDE rsvcditd.
INCLUDE ole2incl.
DATA: application TYPE ole2_object.
DATA: remote_info_line LIKE abaptext-line,
      remote_info_line_a LIKE vrsinfolna,
      remote_info_line_b LIKE vrsinfolnb,
      remote_versno     LIKE vrsd-versno,
      remote_objname    LIKE vrsd-objname,
      remote_objtype    LIKE vrsd-objtype,
      remote_system     LIKE tadir-srcsystem,
      returncode        LIKE sy-subrc.
DATA: srcsys            LIKE tadir-srcsystem,
      author            LIKE tadir-author,
      mslang            LIKE tadir-masterlang,
      devcla            LIKE tadir-devclass,
      notfnd            LIKE bool.
INCLUDE rsvceudb.
INCLUDE rsvcvdtd.                      "VRSD Constants Types
INCLUDE rsvctrtd.                      "Tables for transports details
INCLUDE rsvctrfo.                      "Interface for transport details
INCLUDE rsvcrmck.                      "Remote Access Utilities: Checks
    PERFORM get_rfc_destination   USING    srcsys
                                  CHANGING w_destination1.
    SELECT SINGLE objname objtype korrnum FROM vrsd
           INTO CORRESPONDING FIELDS OF it_transports
           WHERE objname = it_abap_hdr-obj_name
          AND   objtype = it_abap_hdr-object
           AND   versno = '00000'.
   it_transports-trkorr = it_transports-korrnum.
Open tranport number with object name
    SELECT SINGLE trkorr pgmid object obj_name FROM e071
           INTO CORRESPONDING FIELDS OF it_transports
          WHERE trkorr   = it_transports-trkorr
          WHERE trkorr   NE 'SW3_P00001'
           WHERE pgmid    EQ it_abap_hdr-pgmid
           AND   object   EQ it_abap_hdr-object
           AND   obj_name EQ it_abap_hdr-name
           AND   lockflag EQ 'X'.
Open tranport number with object name
    SELECT SINGLE as4user as4date FROM e070
           INTO CORRESPONDING FIELDS OF it_transports
           WHERE trkorr   = it_transports-trkorr.
Remote compare
    IF p_rcomp = 'X'.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          text = 'Remote Comparison started'.
      IF w_destination1 NE space.
        PERFORM remote_compare USING w_destination1.
        IF it_transports-korrnum EQ it_transports-trkorr.
          it_abap_hdr-in_qa = 'Same version'.
        ELSEIF it_transports-korrnum IS INITIAL.
          it_abap_hdr-in_qa = 'Not found'.
        ELSE.
          it_abap_hdr-in_qa = 'Not Same version'.
        ENDIF.
        MODIFY it_abap_hdr.
      ENDIF.
FORM get_rfc_destination USING    pi_orgsys
                         CHANGING po_destination.
Baustein zur Auswahl von R/3-Destinationen.
FUNKTION(EN):
ruft einen FB, der den Anwender eine Destination für den
Aufruf der Versionsverwaltung als REMOTE-Function-Call
auswählen läßt.
Parameter:
PI_ORGSYS LIKE TADIR-SRCSYSTEM
PO_DESTINATION LIKE RFCDES-DESTINATION
DATA: dest_note(60).                 " für STRA Baustein
IF pi_orgsys = space.
    po_destination = space.
    dest_note = space.
ELSE.
    IF pi_orgsys <> sy-sysid.
      po_destination = pi_orgsys.
    ENDIF.
    CONCATENATE
      'Note: The original system of the object is the system'(l11)
      pi_orgsys INTO dest_note SEPARATED BY space.
    CONCATENATE dest_note '.' INTO dest_note.
ENDIF.
CALL FUNCTION 'SVRS_GET_RFC_DESTINATION'
    EXPORTING
      p_text         = dest_note
    IMPORTING
      remote_dest    = po_destination
    EXCEPTIONS
      no_destination = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
Falls keine Destination ausgewählt wurde:
    po_destination = space.
ENDIF.
ENDFORM.                    "get_rfc_destination
INCLUDE LSVRLF07                                                   *
FORM get_version_list_remote USING pi_objtype pi_objname
                             CHANGING po_no_entry.
DATA: old_state LIKE bool.
REFRESH: vrs_dir_vrs, logvers_dir.
PERFORM check_vc_state_remote CHANGING old_state.
IF old_state = true.
    PERFORM get_old_fashioned_versdir USING pi_objtype pi_objname
                                      CHANGING po_no_entry.
ELSE.
    CALL FUNCTION 'SVRS_GET_VERSION_DIRECTORY_46'
      EXPORTING
        destination            = dir_destination
        objname                = pi_objname
        objtype                = pi_objtype
      TABLES
        version_list           = vrs_dir_vrs
        lversno_list           = logvers_dir
      EXCEPTIONS
        no_entry               = 1
        system_failure         = 2
        communication_failure_ = 3.
    CASE sy-subrc.
      WHEN 0.
        po_no_entry = false.
      WHEN 1.
        po_no_entry = true.
      WHEN 2.
       'Fehler im Zielsytem'.
       MESSAGE W123.
       LEAVE.
      WHEN 3.
       'Keine Verbindung zum Zielsystem'.
       MESSAGE W124.
       LEAVE.
    ENDCASE.
ENDIF.
ENDFORM.                    "get_version_list_remote
      FORM CHECK_VC_STATE_REMOTE                                    *
FORM check_vc_state_remote CHANGING po_old_state.
DATA: head_entry LIKE vrsd.
PERFORM get_vrsd_entry_remote
          USING head_type head_objname head_versno
          CHANGING head_entry po_old_state.
ENDFORM.                    "check_vc_state_remote
      FORM GET_VRSD_ENTRY_REMOTE                                    *
FORM get_vrsd_entry_remote USING pi_objtype pi_objname pi_versno
                           CHANGING vrsd_entry po_no_entry.
CALL FUNCTION 'GET_VRSD_ENTRY_46'
    EXPORTING
      destination           = dir_destination
      objname               = pi_objname
      objtype               = pi_objtype
      versno                = pi_versno
    IMPORTING
      vrsd_entry            = vrsd_entry
    EXCEPTIONS
      no_entry_found        = 1
      system_failure        = 2
      communication_failure = 3.
CASE sy-subrc.
    WHEN 0.
      po_no_entry = false.
    WHEN 1.
      po_no_entry = true.
    WHEN 2.
     'Fehler im Zielsytem'.
     MESSAGE W123.
     LEAVE.
    WHEN 3.
      'Keine Verbindung zum Zielsystem'.
     MESSAGE W124.
     LEAVE.
ENDCASE.
ENDFORM.                    "get_vrsd_entry_remote
      FORM GET_OLD_FASHIONED_VERSDIR                                *
--> PI_OBJTYPE                                                    *
--> PI_OBJNAME                                                    *
--> PO_NO_ENTRY                                                   *
FORM get_old_fashioned_versdir USING pi_objtype pi_objname
                               CHANGING po_no_entry.
DATA: vrsd_entry LIKE vrsd.
DATA: object_not_found LIKE bool.
PERFORM get_vrsd_entry_remote
          USING pi_objtype pi_objname null_versno
          CHANGING buffer0 po_no_entry.
IF po_no_entry = false.
    CALL FUNCTION 'GET_VERSION_LIST_46'
      EXPORTING
        destination           = dir_destination
        objname               = pi_objname
        objtype               = pi_objtype
      TABLES
        version_list          = vrs_dir_vrs
      EXCEPTIONS
        system_failure        = 1
        communication_failure = 2.
    CASE sy-subrc.
      WHEN 1.
       'Fehler im Zielsytem'.
       MESSAGE W123.
       LEAVE.
      WHEN 2.
       'Keine Verbindung zum Zielsystem'.
       MESSAGE W124.
       LEAVE.
    ENDCASE.
    SORT vrs_dir_vrs DESCENDING BY versno.
    LOOP AT vrs_dir_vrs.
      logvers_dir-versno = vrs_dir_vrs-versno.
      APPEND logvers_dir.
    ENDLOOP.
    READ TABLE vrs_dir_vrs INDEX 1.
    IF vrs_dir_vrs-versmode = impt_mode.
     Es gibt einen offenen Import, setze Flag zurück:
      vrs_dir_vrs-versmode = corr_mode.
    ENDIF.
    vrs_dir_vrs-versno = 0.
    MODIFY vrs_dir_vrs INDEX 1.
ENDIF.
vrsd_entry = buffer0.
PERFORM add_active_version_remote
          CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
    po_no_entry = false.
ENDIF.
Möglicherweise gibt es eine überarbeitete Version.
PERFORM add_modif_version_remote
          CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
    po_no_entry = false.
ENDIF.
ENDFORM.                    "get_old_fashioned_versdir
      FORM ADD_ACTIVE_VERSION_REMOTE                                *
--> VRSD_INFO                                                     *
--> PO_NOT_FOUND                                                  *
FORM add_active_version_remote CHANGING vrsd_info STRUCTURE vrsd
                                        po_not_found.
DATA: object_not_found LIKE vrsd-versmode.
DATA: nplus1           LIKE vrsd-versno.
DATA: retcode          LIKE bool.
CALL FUNCTION 'FIND_OBJECT_40'
    EXPORTING
      destination           = dir_destination
      objname               = vrsd_info-objname
      objtype               = vrsd_info-objtype
    IMPORTING
      object_not_found      = object_not_found
    EXCEPTIONS
      system_failure        = 1
      communication_failure = 2.
CASE sy-subrc.
    WHEN 1.
       'Fehler im Zielsytem'.
     MESSAGE W123.
     LEAVE.
    WHEN 2.
       'Keine Verbindung zum Zielsystem'.
     MESSAGE W124.
     LEAVE.
ENDCASE.                             " SY-SUBRC.
IF object_not_found = space.
    po_not_found = false.
ELSE.
    po_not_found = true.
ENDIF.
CLEAR: vrsd_info-korrnum, vrsd_info-author,
         vrsd_info-datum,   vrsd_info-zeit.
IF po_not_found = false.
    IF vrsd_info-versmode = impt_mode.
    Es gibt einen offenen Import, und einen Satz n+1 der
    uns verschwiegen wurde. Er beschreibt die aktive Version
      nplus1 = vrsd_info-lastversno + 1.
      PERFORM get_vrsd_entry_remote
              USING vrsd_info-objtype vrsd_info-objname nplus1
              CHANGING vrsd_info retcode.
    ELSE.
      PERFORM get_korrinfo_remote CHANGING vrsd_info.
    ENDIF.
    MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
    vrs_dir_vrs-versno    = null_versno.
    logvers_dir-versno    = acti_versno.
    INSERT vrs_dir_vrs INDEX 1.
    INSERT logvers_dir INDEX 1.
ENDIF.
ENDFORM.                    "add_active_version_remote
      FORM ADD_MODIF_VERSION_REMOTE                                 *
FORM add_modif_version_remote CHANGING vrsd_info STRUCTURE vrsd
                                       po_not_found.
DATA: mod_dd_exists LIKE vrsd-versmode.
CALL FUNCTION 'TEST_MOD_DD_40'
    EXPORTING
      destination           = dir_destination
      objname               = vrsd_info-objname
      objtype               = vrsd_info-objtype
    IMPORTING
      mod_dd_exists         = mod_dd_exists
    EXCEPTIONS
      system_failure        = 1
      communication_failure = 2.
CASE sy-subrc.
    WHEN 1.
      'Fehler im Zielsytem'.
     MESSAGE W123.
     LEAVE.
    WHEN 2.
      'Keine Verbindung zum Zielsystem'.
     MESSAGE W124.
     LEAVE.
ENDCASE.
IF mod_dd_exists <> space.
    po_not_found = false.
    PERFORM get_korrinfo_remote CHANGING vrsd_info.
    MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
    vrs_dir_vrs-versno    = modi_versno.
    logvers_dir-versno    = modi_versno.
    INSERT vrs_dir_vrs INDEX 1.
    INSERT logvers_dir INDEX 1.
ELSE.
    po_not_found = true.
ENDIF.
ENDFORM.                    "add_modif_version_remote
      FORM GET_KORRINFO_REMOTE                                      *
FORM get_korrinfo_remote CHANGING vrsd_info STRUCTURE vrsd.
CALL FUNCTION 'GET_KORRNUM_AUTHOR_DATUM_40'
    EXPORTING
      destination           = dir_destination
      objname               = vrsd_info-objname
      objtype               = vrsd_info-objtype
    IMPORTING
      author                = vrsd_info-author
      datum                 = vrsd_info-datum
      korrnum               = vrsd_info-korrnum
      zeit                  = vrsd_info-zeit
    EXCEPTIONS
      system_failure        = 1
      communication_failure = 2.
CASE sy-subrc.
    WHEN 1.
      'Fehler im Zielsytem'.
     MESSAGE W123.
     LEAVE.
    WHEN 2.
      'Keine Verbindung zum Zielsystem'.
     MESSAGE W124.
     LEAVE.
ENDCASE.
IF vrsd_info-korrnum <> space.
    Korrektur ist offen, Zeitstempel korrigieren:
    vrsd_info-datum = sy-datum.
    vrsd_info-zeit = sy-uzeit.
ENDIF.
ENDFORM.                    "get_korrinfo_remote

Basis of picking means of transport in APO

Please help me in understanding basis of picking means of transport in APO and what is the link between R/3 means of transport and APO means of transport.
Manish

In R/3 the means of transport is recorded in Shipment document. It contains all the information necessary for carrying out transportation. The means of transport necessary for a shipment is reflected in the system as a handling unit. These handling units contain information about tare weight and -volume of the means of transport as well as the weight of the packed handling unit. Information about the country providing the means of transport, details about the driver and travel time are also included in these handling units. Handling units that have already been created for delivery items are copied into the shipment document where they can be packed further, if necessary. Delivery items that have only been partially packed or not packed at all can be packed in the shipment documents.
In APO the means of transport is planned in TPVS. If the client do not have TPVS implemented, the means of transport are taken based on the locations, products and cost as well.
The difference between the R/3 and APO means of transport I see is that in APO there is product specific means of transport wherein we can assign the means of transport for specific products based on its demand or perishability. For example, if we have a Tlane between US and Ind, the possible means of transport could be by AIR or by Water. For a product which is a primary and active product for a company, the means of transport can be assigned as Air rather by water.

Problems With Transporting Interaction Center Scripts

I have problem when I select a Script and click on Transport button in the Web UI for the interaction center, IC_Manager Role. After clicking on the transport button I need to check in the back end (transaction code SE01), if a customizing request has been created for that script I selected.
So the problem is how do we find out if there is customizin request for that script or not? Is there a Pop Up window which comes after clicking on Transport button which would give me a customizin request number, which could be later used to find the request in backend?

Hi,
Try checking this in the BSP Application CRM_IC_ISE.
If you open the script on the third tab (Script Transport) you can see the transport details.
Hope this helps.
Rgds,
Rajiv

How do I AUTOMATICALLY generate Transport request for a Z table data?

Hello friends,
I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
Any ideas?
Your help is greatly appreciated.

You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
Also change the "delivery class' in the table attributes to 'C' - Customizing table

Table Maintenance: Manual Transport for Entries in Customizing Table

Dear forum,
i'm facing a tricky problem at the moment. My customer wants the maintain a customizing table, but he does not want to transport the entries automatically (don't ask me for the reason), but manually.
The online help tells me, that this can be done.
In the SE11 i chose untilities -> table maintenance generator and for the subscreen "dialog data transport details" i chose "no or user, recording routine".
Continuing wiht the SE11 i chose untilities -> table maintenance generator -> environment -> maintenance objects -> transport "manual transport".
In the SE54 i created the events 10, 11 and 12 with the recommended coding from the online help.
But when i start the Maintenance via SM30 the points in the menue table view -> transport or edit -> transport are not active.
The function group does not include any generated statuses to activate the menue-points. What is missing toi get the popup, that asks me for the transport number?
Can somebody help me out or tried this before?
With kindly Regards,
Robert

wrong!
the online documentation says:
Manual transport
The object maintenance transaction offers a manual link to transports. You can branch to it by selecting the Transport menu option. In the transport session, you can then select objects to place them in a Change request. A special transport program may be available instead of the menu option Transport, to place the object in a change request. The setting Manual transport means that changes to the object are not automatically recorded. If the maintenance transaction offers an automatic transport link, in addition to the manual one, you should select the setting Automatic transport.
What has to be done to realise it except creating the events?

Mailbox Transport health state unhelathy

Hi team,
I check my Exchange 2013 Mailbox server, abd the result, Mailbox Transport health set become unhealthy
and after i check into mailbox transport detail, there is some error. here the details
[PS] C:\Windows\system32>get-healthreport -server BCEJKT-MBX2-SVR | where {$_.alertvalue -ne "healthy"} | ft -auto
Server State HealthSet AlertValue LastTransitionTime MonitorCount
NotApplicable FIPS Unhealthy 8/6/2014 3:41:14 AM 22
NotApplicable Monitoring Unhealthy 8/6/2014 3:56:32 AM 9
NotApplicable MailboxTransport Unhealthy 8/6/2014 4:11:41 AM 56
NotApplicable MSExchangeCertificateDeployment Disabled 1/1/0001 7:00:00 AM 2
Server State Name TargetResource HealthSetName AlertValue ServerComp
onent
NotApplicable Mapi.Submit.Monitor MailboxTransport MailboxTransport Unhealthy None
NotApplicable MailboxDeliveryAvail MailboxTransport Unhealthy None
abilityMonitor
NotApplicable TransportDeliveryFai MailboxTransport Disabled None
luresDeliveryStoreDr
iver560Monitor
what error means?
and, why the state "NotApplicable" ?
Is there any services trouble (disturbed)?
Please give me details :)
Thanks
Regards

Hi,
There is no official document explaining the state "NotApplicable". Search all related articles about HealthSet, the state is always NotApplicable.
From the output of running Get-HealthReport cmdlet, FIPS, Monitoring and MailboxTransport health set are unhealthy. Please use the Test-ServiceHealth cmdlet to check result.
Besides, please check the application log and system log for events related to this feature.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

SE10 details into EXCEL

i need to download se10 transport detail (Parent request and child request with description of task) , any idea??
or any view from which i can download into excel in proper format.

Hi,
iopen the view E070CTV then
go to meny SYESTEM --> LIST --> SAVE --> LOCAL FILE
provide the required download path
Edited by: imran khan on Nov 2, 2009 9:18 AM
Edited by: imran khan on Nov 2, 2009 9:20 AM

Create Gate Entry (Transport) CIN SAP

Dear All,
I have activated CIN (country version India) in my system and I am trying to create gate pass using tcode /cvs/gnt01
But system is throwing following error:
Transaction /CVS/GNT01 does not exist
Would you please let me know how you have accessed the Create Gate Entry (Transport) screen?
What is the menu path/tcode for that?
P.S. I am able to access other transactions related to CIN like create excise invoice, list of GRs w/o Gate pass etc.
Regards,
Ali

Dear Ali,
There is no standard process for Gate Entry other than LECI but you can customized as per your requirement, we have developed Gate Entry and Exit process for one of our client and since it is processing smoothly.
1. Gate Entry screen contains 2 radio button and it can be created w.r.t PO and Inbound Delivery.
2. The screen contains Invoice no and date, PO number, IBD number, Vendor, Plant, Location and Transportation details like No of cases, LR number, LR date, Vehicle number, Transporter Name, Mode of transport etc...
3. We have used the following Tables
LIKP, LIPS, EKPO, EKKO, j_1imovend, j_1imoddet1
4. Ask your ABAPers to put a) Table control declaration, b) Structure declaration for PO as well as IBD, c) Internal Table and work area declaration, d) Constant declaration.
5. Write program with below call function (Choose right one as per the requirement)
     a) CONVERSION_EXIT_ALPHA_OUTPUT.
     b) BAPI_GOODSMVT_CREATE.
     c) BAPI_TRANSACTION_COMMIT.
     d) RP_CALC_DATE_IN_INTERVAL.
Hope you clear....
Regards,
Karna J

Transporter details

Similar Messages

Maybe you are looking for