Transporting a Data Source and Hierachie to the Quality System
Hello,
i have following problem.
I want to transport a generic data source from our development system into the quality system.
In the development system the hierachie looks like
New-Hierroot
->CO
->ABB
->Datasource ABB
When i transport the data source into the quality system the hierache looks
New Hierroot
->Nodesnotconnected
->CO
->ABB
->Datasource ABB
How can i solve this problem? Transaction rsa9? We dont have business content on our r/3 systems and iam not allowed to change such settings...??
Thank you greetings
i don't understand that exarctly.
Transport connectionscreen is se09? (what transaction is that?)
and whatis a dev to Q mapping
Sorry iam new..
Message was edited by:
Katsumoto
Similar Messages
-
Data source Replication error in BW Quality system
hi experts,
when i replicate the data source in BW QUALITY SYSTEM it is giving the below error.
Invalid call sequence for interfaces when rec
changes.
plz find the long text
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.
After replication of data source changes are not reflecting in BW QUALITY SYSTEM.
REGARDS
venuscmHi,
Hope you have checked whether the DS has been transported to R/3 Quality and got activated before Replication in BW quality.
Check RFC connections between the systems.
Check RSLOGSYSMAP table in both Bw & R/3 to confirm the system mappings.
Try replicating again.......
Regards,
Suman -
Data source and attribute list transport
Hello gurus!
How can we transport data source and attribute list to another system?
In IMG system writes "Transport is not required".
Best regards,
Artur Litvinov.Hi Artur
Attribute sets can be transfered thorugh RFC connection. Create the RFC of the source system in target system, then import the Attribute sets using the option "Transfer of Attribute Sets from Other System " tcode CRMD_MKT_TOOLS - Expert Tools.
Hope this will help
Rgds
Mallikarjun -
OWB 10g -- Can't Create Database Links for Data Source and Target
We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not. -
Probelms while replicating Data Source and transport into test system
I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM -
I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b
i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
what would be the causeHi,
I guess you mean the target table in BW, correct?
First replicate your DSource in BW
Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
You should now see the field in your PSA table.
hope this helps...
Olivier. -
The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Excel data source and the use of add command
HI, Looking for suggestions on how to work with multiple inputs that cannot be joined directly. Here's the background.
The Report currently reads in two different Ecel files and uses 3 SQL commands to query an Oracle Database. I need to join the 5 data sources and am having issues with the 2 excel files. In one file I need to be able to derive a field based on another column in the file In order to create the join condition to the SQL commands. I'd equate this to a case statement in SQL, but how goes one do that using the 'add command' feature? What is the syntax?
Next I would need to join (left outer) the two excel files using two fields from file A (a1, a2) and 3 fields from file B (b1,b2,b3), where a1=b1 and b2 <= a2 <= b3 when rows from A exist in B. If row A does not exist in B then we still want it in the report and available to left outer join to the 3 oractab data sources.
runtime is also a concern.
Any Suggestions?hi Elena,
in this case the use of subreports is not recommended. that's because you're exporting to excel and you need data in columns across the report. subreports will not, unfortunately, give you what you need.
this would bring you back to joining the datasources. what i would recommend is looking into using 'oracle database link' to link your oracle db to excel files. here's one article as an example but you may be able to find a better one. if you have questions on this please ask them on an oracle forum as the syntax that you need will be database specific.
a lot of databases have this type of technology which allows you to create a view to other data. sql server has 'linked servers', sap hana has 'smart data access'. essentially you are creating a non-materialized view to the external data. then this view is available on the main oracle server where you established this connection. this should be a lot easier than trying to bring a bunch of command objects together off independent datasources inside of crystal.
-jamie -
Error While Transporting export Data Source
Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin MotgiHi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S -
DYNPRO_SENT_IN_BACKGROUND Error while transporting XI data source
Hi Experts,
We are having an issue in in transporting XI data source in BI from Dev to Test. The error is geenrated during post handling of the transport, possibly while the data source is bing activated. Teh ST22 dump gives the DYNPRO_SEND_IN_BACKGROUND error. Following informaiton is available in the User Information section of ST22 dump.
Call Program........."CL_RSDS_WEBSERVICE============CP"
Function Module..... "RSDS_WS_WEBS_GENERATE"
Information on where terminated
Termination occurred in the ABAP program "SAPLSTRD" - in "SYSTEM-EXIT".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 0
of the (Include) program " ".
Please give us your advice on how to nail down this issue.Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S -
Generic Data Source and InfoPackage Data Selection
Hello, I'm trying to extract data from a generic data source (composed of a view joining 4 tables) using the Data Selection Criteria in an infopackage. Sometimes the selection criteria is ignored and more data is pulled than expected. The number of selectable items in the generic data source has been reduced (in case this was an issue) and for a short time the infopackaged pulled the expected number of records. Then another change was made to the generic data source and the problem returned. In any case, the transported generic data source does not work in the target system either. I'm not sure what is causing this to happen. Any ideas??? BW 3.5.
Regards,
Sue
Message was edited by: Sue and Enrique
Ramesh PHi,
Some of the datasources will not have default Infopackages for them.You can create the infopackages according to the requirement.There is no big deal for creating Infopackages.You can go ahead creating them.
Regards
Karthik -
Create two or more data sources and mapping to DSO
Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense? -
I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
the timeout for the dataset is "0" seconds.
I click the "OK" button and I'm presented with the parameters to the stored procedure.
I enter valid data for the parameters and click the "OK" button.
I then get the following error message after 30 seconds:
The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
I think the smallest timeout we have is 120 seconds.
I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
To me, this is NOT a solution.
I have too many stored procedures that need to be brought into Report Builder.
I need a real solution.
Thank you for you time, Tim Caldwell.
Timothy E CaldwellI don't mean to be rude, but really, check to see if the stored procedure can return data rows???
Maybe I'm not being clear enough.
The stored procedure runs perfectly fine.
it runs perfectly fine in the production environment and the test environment.
I can access the stored procedure in several ways and have it return correct data.
I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it. After
report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
It would appear that there is something within report builder itself that is causing this issue.
The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
USE [CRUM_IT]
GO
/****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
@CompanyCode varchar(8) = null,
@GetSiblings varchar(1) = 'N'
as
Begin
-- get emergency contact info
select *
into #tmp_Contacts
from
(select
ConEEID,
con.connamelast as [Emer Contact Last Name],
con.connamefirst as [Emer Contact First Name],
con.connamemiddle as [Emer Contact Middle Initial/Name]--,
,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
,ISNULL(
case when con.conphonepreferred = 'H'
then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
end,
) as [Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
where con.ConIsEmergencyContact='y'
and con.ConIsActive='y'
) A
where A.rn = 1
CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
If @GetSiblings = 'Y'
Begin
INSERT INTO #tmp_CompanyCodes (CompanyCode)
EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
End
INSERT INTO #tmp_CompanyCodes
values (@CompanyCode)
select *
into #tmp_Company
from [ultiprosqlprod1].[ultipro_crum].dbo.Company
where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
select distinct
cmpcompanycode as [Client ID],
CmpCompanyDBAName as [Client Name],
eec.eecEmplStatus AS [Employment Status],
eec.eecEmpNo AS [Employee Num],
rtrim(eep.eepNameLast) AS [Last Name],
rtrim(eep.eepNameFirst) AS [First Name],
isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
rtrim(eep.eepAddressLine1) AS [Address Line 1],
isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
eep.eepAddressCity AS [City],
eep.eepAddressState AS [State],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 1, 5)
ELSE rtrim(eep.eepAddressZipCode)
END AS [Zip code],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 6, 4)
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
WHEN len(eep.eepAddressZipCode) <= 5
THEN ''
END AS [ZIP + 4],
substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
eetFED.TAXCODE AS [FED Tax Code],
eetFED.FILINGSTATUS AS [Fed Filing Status],
eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
eetFED.ADDITIONAL AS [Additional Fed Withholding],
eetSIT.TAXCODE AS [SIT Tax Code],
eetSIT.FILINGSTATUS AS [State Filing Status],
eetSIT.EXEMPTIONS AS [State Exemption Allowance],
eetSIT.ADDITIONAL AS [Additional State Withholding],
isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
isnull((SELECT cod.codDesc
FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
WHERE cod.codCode = eep.eepEthnicID
AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
eep.eepGender AS [Gender],
isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
isnull(eecTermType,'') as [Termination Type],
isnull(TchDesc, '') as [Termination Reason],
rtrim(eec.eecJobCode) AS [WC Code],
isnull(eec.eecJobTitle, '') AS [Job Title],
pgr.pgrPayFrequency AS [Pay Frequency],
eec.eecFullTimeOrPartTime AS [Full/Part Time],
eec.eecSalaryOrHourly AS [Pay Type],
isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
[YTD Hours],
isnull(eep.eepNameFormer, '') AS [Maiden Name],
eec.eecLocation AS [Location ID],
rtrim(eec.eecOrgLvl1) AS [Department ID],
eec.eecorglvl2 AS [Cost Item],
eec.eecorglvl3 as [Client Project],
eec.eecPayGroup as [Pay Group],
isnull(eepAddressEMail,' ') as [Email Address],
isNull(BankName1,' ') as PrimaryBank,
isNull(BankRoute1,' ') as PrimaryRouteNum,
isNull(Account1,' ') as PrimaryAccount,
isNull(AcctType1,' ') as PrimaryAcctType,
isNull(DepositRule1,' ') as PrimaryDepositRule,
isNull(BankName2,' ') as SecondaryBank,
isNull(BankRoute2,' ') as SecondaryRouteNum,
isNull(Account2,' ') as SecondaryAccount,
isNull(AcctType2,' ') as SecondaryAcctType,
isNull(DepositRule2,' ') as SecondaryDepositRule,
isNull(
CASE
WHEN DepositRule2 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
WHEN DepositRule2 = 'P'
THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as SecondaryDepositAmount,
isNull(BankName3,' ') as ThirdBank,
isNull(BankRoute3,' ') as ThirdRouteNum,
isNull(Account3,' ') as ThirdAccount,
isNull(AcctType3,' ') as ThirdAcctType,
isNull(DepositRule3,' ') as ThirdDepositRule,
isNull(
CASE
WHEN DepositRule3 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
WHEN DepositRule3 = 'P'
THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as ThirdDepositAmount,
Supervisor,
eec.eecEEID AS [Employee EEID],
eec.EecJobCode As [Job Code],
isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
con.[Emer Contact Last Name],
con.[Emer Contact First Name],
con.[Emer Contact Middle Initial/Name],
con.[Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
ON eep.eepEEID = eec.eecEEID
inner join #tmp_Company cmp WITH (NOLOCK)
ON eec.eecCOID = cmp.cmpCOID
inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
ON eec.eecPayGroup = pgr.pgrPayGroup
left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
on tchCode = eecTermReason
left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
eeeEEID,
eeeCOID
from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
group by eeeCOID,eeeEEID)eee
on eec.eecEEID = eee.eeeEEID
and eec.eecCOID = eee.eeeCOID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode = 'USFIT'
)eetFED
ON eec.eecCOID = eetFED.COID
and eec.eecEEID = eetFED.EEID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode like '%SIT'
AND eetIsWorkInTaxCode = 'Y'
)eetSIT
ON eec.eecCOID = eetSIT.COID
and eec.eecEEID = eetSIT.EEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName1,
eddEEBankRoute BankRoute1,
eddAcct Account1,
EddAcctType AcctType1,
EddDepositRule DepositRule1,
EddAmtOrPct EddAmtOrPct1
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '99')edd
ON eec.eecCOID = edd.eddCOID
and eec.eecEEID = edd.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName2,
eddEEBankRoute BankRoute2,
eddAcct Account2,
EddAcctType AcctType2,
EddDepositRule DepositRule2,
EddAmtOrPct EddAmtOrPct2
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '01')edd2
ON eec.eecCOID = edd2.eddCOID
and eec.eecEEID = edd2.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName3,
eddEEBankRoute BankRoute3,
eddAcct Account3,
EddAcctType AcctType3,
EddDepositRule DepositRule3,
EddAmtOrPct EddAmtOrPct3
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '02')edd3
ON eec.eecCOID = edd3.eddCOID
and eec.eecEEID = edd3.eddEEID
left outer join (SELECT eecCOID,
eecEEID,
rtrim(eepNameLast) + ', ' +
rtrim(eepNameFirst) + ' ' +
isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
on eeceeid = eepeeid)eec2
ON eec.eecSupervisorID = eec2.eecEEID
left outer join #tmp_Contacts con
on eep.eepEEID = con.ConEEID
order by [Client ID],
[Last Name],
[First Name]
drop table #tmp_Contacts
END
Timothy E Caldwell -
Create a ReportingServices data source and upload to a data connection library
I have installed reporting services 2012 in SharePoint 2013 integrated mode. I need to create a report data source and upload it to a data connection library using
C#.
As I know it uses the ReportingServices2010 class but I cannot explore a reporting server url.
There is a ReportingServices2010.asmx file in the 15 hive though.
Also it works fine when I manually set the data source.Hi,
The following materials would be helpful:
Inserting Data Connections into a SharePoint Library
https://social.technet.microsoft.com/Forums/en-US/df79dce5-fd92-4506-af4e-11127cb0d655/inserting-data-connections-into-a-sharepoint-library?forum=sharepointdevelopment
Programmatically exporting reports from SQL 2012 Reporting Services
http://stackoverflow.com/questions/12199995/programmatically-exporting-reports-from-sql-2012-reporting-services
Report Server Web Service Endpoints
http://msdn.microsoft.com/en-us/library/ms155398(v=sql.110).aspx
Best Regards
Dennis Guo
TechNet Community Support -
Help to read a table with data source and convert time stamp
Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
RamHi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS TYPE TIMESTAMP,
V_TS_T TYPE CHAR16,
V_YYYY TYPE CHAR04,
V_MM TYPE CHAR02,
V_DD TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM = V_TS_T+4(2).
V_DD = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
/10 V_YYYY,
/10 V_MM,
/10 V_DD,
/10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -
Maybe you are looking for
-
My ipod nano 6th generation will not turn on.
My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response
-
A text with strings from query - how???
There is on-demand process, that return text to text-area element. DECLARE LIST_OF_APP varchar2(32000) := ''; BEGIN BEGIN FOR i IN (SELECT TITLE, TIMEOFCHECK FROM ACTIVEWINDOWSOFUSERS WHERE NUMBEROFPROCCESS=:STATE_SR AND MYUSER=:USERID_SR ) loop LIST
-
How to know the size of data in some columns of a table?
Hi, How can the size of of data for some specified column be determined? For example : TableA has 20 columns and the size of table is 20 GB. I want to know the size of data kept in last four columns. Thanks in Advance, Vishu
-
Translation of Wiki Server (10.8)
Hi there! I need to translate my new wiki server (10.8) to my native language. I did it before with Wiki Server Lion. But now I have problems with finding all the files in OS X Server 10.8 that I need to translate. Files locations in 10.7 were: /usr/
-
I m looking to get solution manager 4 to generate key for SAP IDES 5 installation .........please help. thanks in advance Bill