Transporting a model in VC from higher version to lower version

Hi All,
How can i transport a model built in higher version to lower version.(EHP1 to 700.14 of Portal)
Also, will all my fuctionality work there if it is transported?
I have imported a model built on higher version of Sandbox to lower version of Dev server by changing its version manually by opening the model in notepad.But after deployment i am not able to see any of the functionality working.Such as-I am not able to submit the data enetred in the data fields.
Please help.
Thanks & Regards
Richa

Adding some points to the above question.
Also,I cannot clear entries from the data fileds, as there is not System Action defined for clear in version 700.14.
Please suggest,what changes shall i make.
Thanks & Regards,
Richa

Similar Messages

Tranport Request from Higher version to Lower Version

Hello,
                  Can any One Know how to Transport Requests from Higher Version to Lower Version for Example
                   From Ecc6.0 Ehp1 to->>>>> Ecc6.0.    is there is any way or any SAP Note related to this?
                  Please, send me if any one done/ aware of it with the needful steps     ASAP
Thanks & Regards,
pavankumar.

Not sure you are in the right forum. You will have a better chance of an answer in a Basis forum.

Table export from higher version

Hi,
I have two database servers one on Oracle 10.2.0.3.0 -- 64bit and the other one in Oracle 9.2.0.4.0
I have a table in 10.2... and I want it to be exported to 9.2.... I know that exports from higher version could not be imported with lower version. How can I do this?
I have not yet tried to import with 9.2 so I don't have any error messages.
Thanks,

Well, you already got answers for this one. Just adding the relevant topic from the Utilities manual.

Importing dump taken from higher version to lower version

Hi all,
I have already taken dump from oracle 9.0.2 database without using exp utility of lower verion and alo without running catexp.sql script prior to export.
Now i need to import this dump into 9.0.1 database.It gives error due to backward-incompability.
Is there any way to import without re-exporting whole database again using exp utility of lower version against higher version.

It is an unsupported scenario. I had to face it once with the same 920->901 versions. What I did was also absolutely unsupported at my own risk and it was a last chance action. I'll tell you what I did and how it worked for me, which doesn't mean it will work for any situation. If you open your file with a binary file editor you will see at the first file blocks a header that displays the export version "EXPORT:V09.02.00" This header is read by the import to check which version was used to generate the file and prevent an unsupported downgrade, I changed it to EXPORT:V09.00.01 and retried the import. A lot of error messages appeared, but it successfully loaded my information. I took the risk because I made sure this specific database contained just basic tables, indexes and version compatible objects and definitions, it was a testing environment, I didn't have the right Oracle version and there was no time to get it, and finally I had a bullet proof backup.

Transport Org Model in CRM from Dev to QA

Hi All
We have replicated the Sales Org structure from ECC to CRM using the report CRMC_R3_ORG_GENERATE in the Development system.
SAP Note 548202 advises that this report for replication of Org Model should be executed only once to Initial load the Org Structure from ECC to CRM and then the Org Structure must be transported to QA and Production using the Customizing client of the CRM server.
Pl provide the approach procedure or any pointers for the same.
Thanks in advance
Best Regards
Ram Sushanth

Hi,
the process is described in the notes 327908 and 548202. There you will also find the mentioned reports RHMOVE30 and RHMOVE50.
Best regards
Thorsten

Export import issue from higher version to lower version

Hi,
I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
Two ways i have found and tested in my test db
1)TNS entry of 9i database has been put into 11g database
a)Export dump was successfuly taken from 11g db
b)Getting below error,while import into 9i database
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
2)TNS entry of 11g database put into 9i database version.
a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
EXP-00008: ORACLE error 1455 encountered
ORA-01455: converting column overflows integer datatype
EXP-00000: Export terminated unsuccessfully
Kindly advice me to overcome from this issue.
Regards,
Faiz

mafaiz wrote:
Hi,
I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
Two ways i have found and tested in my test db
1)TNS entry of 9i database has been put into 11g database
a)Export dump was successfuly taken from 11g db
b)Getting below error,while import into 9i database
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
2)TNS entry of 11g database put into 9i database version.
a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
EXP-00008: ORACLE error 1455 encountered
ORA-01455: converting column overflows integer datatype
EXP-00000: Export terminated unsuccessfully
Kindly advice me to overcome from this issue.This has nothing to do with APEX. Post on the {forum:id=61} forum.

Exp imp issue from higher version to lower version

Hi,
I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
Two ways i have found and tested in my test db
1)TNS entry of 9i database has been put into 11g database
a)Export dump was successfuly taken from 11g db
b)Getting below error,while import into 9i database
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
2)TNS entry of 11g database put into 9i database version.
a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
EXP-00008: ORACLE error 1455 encountered
ORA-01455: converting column overflows integer datatype
EXP-00000: Export terminated unsuccessfully
Kindly advice me to overcome from this issue.
Regards,
Faiz

lkm_thedba wrote:
you can use VERSION parameter in datapump and make this workable.
Cheers,
lkmYou cannot, since 9.x does not use datapump. The VERSION parameter can only be used if the target is 10.x or above
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#autoId57
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_overview.htm#CEGFCFFI
HTH
Srini

Transporting Org model changes (deletions) from DEV to QAS

Hi All,
We have Org model created in CRM Development server, which was earlier transported to Quality server using the report program RHMOVE30.
Now, based on unexpected changes in the requirement, in Development server we had to make some changes to the Org model, like added new org units and positions (which is fine, as we can do a delta transport), but the problem is that, we have also deleted few Org units and positions in Development server (these org units are already available in Quality), now my issue is that, how can transport these changes to Quality (is is possible delete the org units in Quality using a Transport Request).
Is there a way out to even transport the deleted entries, so the they get deleted in Quality as well.
Thanks in advance for your time.
Regards

Hello
Maybe you create a transport request including your new org structure and run report RHMOVE30. There is also a flag "delete objects" in that report that can can delete individual org units.Just enter the org unit ID and click on that flag.
Transporting org structure is very delicate. My personal advice is: If there are not too many orgs to delete and the task can be done manually in your QA system, just do it manually.
Regards
Joaquin

Conversion from higher value to lower

Hi,
I have a variable of dec type length 17 which i need to copy in variable of type dec with length 16. Please let me know the shotest solution for the same.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:48 AM

I don't think you can use offsets with packed fields.
I would just check to make sure the amount in the source field is not too large for the destination and then if it's not, just do a MOVE.
Rob

Error while transporting function grp from lower version to higher version

Dear Experts,
While transporting the function group and function modules from system A to system B, I am getting the below error
"Program SAPLZATSCSNG_EINB, Include LEINBF10: Syntax error in line 000068
Field 'GF_ETS_MODIFIED' is unknown. It is neitherin one of the specified tables nor defined by a 'D"
System A is a lower version SAP system and system B is a higher version. I compared the code of Include LEINBF10 in both the systems and there is a data declaration of field GF_ETS_MODIFIED in system B. But this is missing in system A.
Please guide me for this issue.
Thanks in advance.

Thankyou for your reply Rob.
Actually I am transporting the function group and modules from my development system to the client development system.
I dont have any other option but transport the files.
Is there any possibility to modify the include without applying a patch or upgrading my system?
Edited by: ShwetaD on Apr 15, 2010 10:24 PM

I have a imac g5. It's running off version 10.4.11. How do I update it to a higher version? Do I have to buy that software or can I download it from apple?

I have a imac g5. It's running off version 10.4.11. How do I update it to a higher version? Do I have to buy that software or can I download it from apple?

Does the computer's installed version of OS X (Tiger 10.4.11) have an install
+ restore DVD, or is that missing? The original disc set usually would include
the extra applications not found on a retail version OS X install DVD; and a
bonus is the original software kit included the version Apple Hardware Test
for your computer model. This also is not included in a retail OS X install DVD.
If you have your computer serial number and model information available,
and try calling Apple (main number, not local store) and ask to speak to an
Operating System Specialist, when you get someone matching that position
on the phone ask what they can do for you regarding a Replacement DVD
install disc for a system that can run in your computer.
If your computer shipped with a Tiger version, that would have been originally
on a grey-label DVD set include with the computer, with a part number on it.
A replacement may be harder to get, than say, a white label Replacement
DVD install disc for Leopard 10.5. There had been a white label non-retail
full install version of both Tiger and Leopard, available for a time from Apple
sales support main numbers (or applecare?) for a reasonable fee. Maybe still.
Perhaps if one kind of replacement system disc is not available, they may
have some other option at Apple. The main store number may not be the
correct place to ask, but they may be able to redirect you to an OS Specialist.
(in US 1-800-MY-APPLE is the main #. There is another number I don't recall.)
Good luck & happy computing!

Upgrade MacBook OS from original Mac OS x 10.4.11 to higher Version

Hi Support Team,
I am using an old MacBook installed with Mac OS x 10.4.11.
I wish to upgrade my Max OS to a higher version.
What could be done?
Thanks,
NORA

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

If Yosemite is not available to you, your system may not meet the minimum requirements.
How to install OS X Yosemite on your Mac - Apple Support

How to convert LV Vi's from LV 7.0 to higher versions or viceversa.I need the steps.

For example i have labview 7.0 and i wan to open in LV 8.0 or still higher..so how to convert my VIs to higher versions or vice versa..I need the steps to convert.

Hello,
If you want to convert a vi written in LV 7.0 to a higher version (say 8.5) open the vi written in 7.0 with 8.5 and then save the same. (once you save it to 8.5, you can not open it with 7.0 since 8.5 is higher than 7.0. So male sure to back up your 7.0 version files)
Now to convert a vi from 8.5 to 7.0 (for example) it gets a litle complicated becase you have load the vi in LV8.5 and then select the option File-->Save for Previous version and select the appropriate option (like 8.2, 8.0 or any other that gets populated in the drop down menu).
Now say that you have selected the option 8.0, Again the vi saved in 8.0 and follow the same procedure to save it to 7.0 version of labVIEW.
The reason i said it gets complicated becasue you must have installed all the version of labVIEW (in the above case its LV 8.0) for a sucessful downgrade.
Hope this helps you out
Guru
Regards
Guru (CLA)

HT4972 Hi All can some outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

Hi All can someone outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

Please read and follow the instructions of the Apple link you posted from. Please note, if you have a 3G as opposed to a 3GS, you can not upgrade above iOS 4.2.1.

Transporting a model in VC from higher version to lower version

Similar Messages

Maybe you are looking for