Transporting a PC with new Infopackages

Hello Every One,
I am in the process of creating a lengthy process chain in D system. In the course of development, I am forced to create/modify the delta Infopackages and also variants. But in my Quality System, these infopckages and variants are not completely there. So when I move my PC from D to Q, What will happen?
Do I need to move the newly created/modifed infopackages first to Q system?
While creating my chain, I am saving all changes into a TR. If I move this particular request alone, will it solve my purpose?
I want my chain to be succesfully transported to Q and get activated.
Regards,
SbgSAP

Hi,
Thanks for ur reply. I mean RSA1->Transports-> I need to collect my PC here. Can u just tell me what are the options I should use while collecting my PC ina TR?
As you told you have all your objects in Q. I am assuming you have made changes only to Process chain & you have edited/created few IP's which are then used in PC.
In RSA1 trans --> goto Transport Connection --> Select Process chain --> Drill down --> Click on Select objects --> find you PC from Here --> Transfer/continue --> In the right tab, select the Disaply as List & Grouping as "In Dataflow Before & Afterwards" --> you will find all the Data flow before & Data flow after objects --> But you need to concentrate only on Process chain, Process chain starter, Process Variants to collect Process chain. Just right clik on them & select Transport all below for these 3 folders.
Also Right click on the new IP's that you created/edited --> Transport all below.
To make sure that you are not transporting anything that is not required --> Just right click on the Folder(like InfoArea/DSO/DTP's etc) --> Do Not Transport Any below
Hope it is clear!
Regards,
Pavan

Similar Messages

VK12 - disappered %? how to transport the table with new tax codes?

Hallo
I'm changing conditions for tax codes in VK12. I have 2 questions:
1. When I created new entries, the % sign disappears. What shoud I do with this?
2. Should I create a transport with this changes? Or should I create all new entries with new tax codes manually in all target systems?
Thanks for all help,
Megy

hi,
normally tax code changes will be done in PRD directly.
no need to transport
in VK12, that is change condtion record, you will find the details of condition record right.
then why are you going to create again.
change what ever you want to change then and there only and proceed with your requriment.
regards,
balajia

Transporting SolMan project with Aris integration to new SolMan system

We have a sandbox SolMan that was installed for temporary use, and some people on the team have done some process modeling with Aris. We need to move this to a new SolMan development system that we're about to install. I haven't really found good documentation on doing this, but in SOLAR_PROJECT_ADMIN, I do have the option to transport a complete project. Can I do this, and then manually import that transport request into the new Dev system? What has to be done on the Aris side to insure consistency?

Hi David,
There is not a lot of information about this topic. Just finished a project migration at the customer site. I used the solar_migration transaction, worked very good. But has some downsites, test plans are not migrated anc change documents. Be carefully with content repository this really painful. Even the Aris synchronisation worked because the SAP ids are not replaced.
regards,
Ralph

Process chain alteration in BI 7 with new DTPs and Infopackages

Dear All,
For my BI system, the source system got replaced from 4.7 to ECC 6.0 system. All the datasources that were earlier part of old system were recreated in the new one too.
Now, I have a process chain in my production system which handles all the master data and transactional data loading. It makes use of the Infopackages(with respect to the old system) to load these data. Since I have new datasources, so I will be having new Infopackages too(with respect to the new system). I need to replace all the old infopackages with the newly created ones in the process chain. Is there any direct step or method for this or shall I have to create a new process chain from scratch ?
Regards,
Srinivas

hii
As soon as u click on the info pkg & right click on it it shows the number of options like to display the variant , exchange the variant, connect with, etc.
So go in the edit mode of process chain, right click on info pkg variant & select exchange variant, it opens a box having aal info pkgs, select the desired info pkg & save & activate the process chain
thanks
neha

Transport Required when Creating New Query

I am attempting to create a new query on an InfoProvider which has several existing queries written on it. After I have created the query in development when I attempt to save the query I receive an error saying the "query could not be saved due to a problem in transport. BEx transport request '' is not available or suitable".
It appears that the system is looking for a BEx transport to be assigned via RSA1 but since this is a new report I believe I should be able to save the report to TMP and assign a transport at a later time.
Am I correct in my assumption and, if so, any thoughts why I'm receiving this error?

Hi Jonathan,
Unfortunately, you do need a transport request if you are using already transported objects in yur new query definition. Even if you assign a request in RSA1 > transport connection, you will need to log out and logback into BEx before you can save your query. As an option and to save part of your development effort, you can remove these objects from your definition and save it. Then log out, assign a request and log back into BEx and then add the other objects to your query.
About the points: There seems to be something wrong with it for the past couple of days and I assume SDN is working to fix it. May be you can check back later and see if it is available...

Error transport condition table with SCC1

Hi,
I have an error message when i transport my request of new condition table from client 100 to 200 with SCC1.
The error message is :
Program ended with error or warning, return code: 4
Message no. TA146
Log Message in SCC3
Target Client           200
Source Client          100
Copy Type               Copy by Transport Request
Transport Request       DRTK900766
Status                  Completed w. Dictionary Errors
Statistics for this Run
- No. of Tables                 0 of        14
- Lines in Old Objects          0
- Lines in New Objects          0
Warnings and Errors
Table           Component Package
T681            SD-MD-CM   Table Cross-Client
T681E          SD-MD-CM   Table Cross-Client
T681S         SD-MD-CM   Table Cross-Client
T681T         SD-MD-CM   Table Cross-Client
T682           SD-MD-CM   Table Cross-Client
T682I          SD-MD-CM   Table Cross-Client
T682T         SD-MD-CM   Table Cross-Client
T682Z        SD-MD-CM   Table Cross-Client
TMC1         LO-LIS-DC Table Cross-Client
TMC1D        LO-LIS-DC Table Cross-Client
TMC1K        LO-LIS-DC Table Cross-Client
TMC1T        LO-LIS-DC Table Cross-Client
TMC73        LO-LIS-REP Table Cross-Client
TMC74        LO-LIS-REP Table Cross-Client
But i have checked all table above, my new condition table have been added on it. when i transport again, error message is same. Any solution of this ?
Thanks,
Toktok.

hi ,
Please check all tables whether they are active .
also check any data element or domain created is active   .
and then transport request .
Regards
Deepak.

Transport error failure with return code 12 for BIA indexed Cube

Hello,
I was trying to transport few cubes from the Dev to the QA system. However, the transport failed repeatedly with return code 12. I noticed that the version of Cubes in the target system had BIA indexes loaded on it. So, I deleted those indexes and re-transported the cubes.To my surprise, the transport went fine without the BIA indexes. This now opens up a new avenue for discussion of dropping and recreating BIA indexes for those cubes that needs to be transported.
Any thoughts on this new aspect before. Has anyone faced similar problems. I want to know your experiences before we can take this issue to SAP.
Thanks,
Rishi

Rishi/Vitaly/Marc,
How do you transport cubes with BIA indexes.
Do you drop/recreate the BIA index before the transport.
In my case, the transport kicked off adjustment job exactly as described in [Note 1012008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1012008]
Indexes looks fine once this jobs completes successfully. The transport does not fail.
Is this approach fine.
I see that most of the customers drop/recreate indexes before transporting cubes.
Can I run into data consistency issues with this approach?
Input required.
Thanks,
Saurabh

How to migrate Exchange HUB transport 2007 server with Exchange Hub transport 2010.

Hi,
How to migrate hub transport 2007 server with Exchange 2010 hub transport server.
Regards
Anil

Hi Anil
You do not do an in-place upgrade of Exchange - you build new Exchange 2010 Hub Transport Servers, you can utilize existing hardware by uninstalling and installing Exchange 2010 - but you must have Hub Transport Servers that match the Exchange version in
place for all Mailbox Servers that have the same Exchange version.
Essentially there must be Exchange 2007 Hub Transport servers in place whilst there are Exchange 2007 Mailbox servers.
Read "Upgrading from Exchange 2007 Transport -
http://technet.microsoft.com/en-us/library/dd346708%28v=exchg.141%29.aspx"
Exchange 2010 will synchronise certain configuration like Transport Rules and journaling when installing the first Exchange 2010 Hub Transport server, but from then on you must ensure synchronisation yourself.
Send Connectors and Recieve Connectors will need manual configuration.
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Overwrite existing Domain values with new one

Hi All,
I have an existing database (It is not an SAP table, it was made for client, but I am not supposed to modify it). But, my issue is that, I have to change the values of domain used in it to new values.
For e.g.
Current Values are 1 - ADD, 2 - NOT POSSIBLE and so on
New values to be added: 1 - ADDITION 2- ADDITION NOT POSSIBLE.
I tried using 'Fixed Value Append', but I want to overwrite the values with new ones.
Please suggest me if there is any method to do it.
Thanks.

Hi,
I don't understand if it a Z-table what is the problem in changing domain and why you are not supposed to change it since the task is assigned to you.
Anyways, even if you write a code to change domain values, you would have to then get it moved to production for changes to reflect. Also, I don't think you would have the authorization to change table entries directly. Also this will result in inconsistency in various clients for domain values..
The better solution would be, get authorization to change domain values, create transport request for this and get it moved to subsequent systems.
Thanks.
Ravi

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Transporting a PC with new Infopackages

Similar Messages

Maybe you are looking for