Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20  routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

Similar Messages

  • Error while transporting Dimension Members from Dev to Quality

    Hi all,
    I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset XXXX
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'XXXX'
    No access to environment 'XXXX'
    BPF: Error reading master data
    No access to environment 'XXXX'
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    please advise.
    Thanks.
    Ambika

    hi Raju,
    i tried after giving full access but again same error:-
    please see the error log below:-
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset PETFAS
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
    BPF: Error reading master data
    No access to environment 'PETFAS'
    End of data checker messages for Appset PETFAS
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
    Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    any suggestion..
    thanks,
    Ambika

  • While transporting Key Figures from Dev to Quality system, error occured.

    Hello Experts,
    While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
    field)".
    Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
    These Key Figures are used in ODS.
    Is there I am missing something, please tell how can I make these transports successfull.
    Thanks Ishdeep.

    While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
    Yes you missed to transport reference object.
    Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char  like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
    During transpotation you need to collect this reference char with main key figure and then transport.
    With Regards,
    Kishore.

  • Transporting "Marketing Attributes" from Dev to Quality

    Hi Folks
    Can anyone tell me how can I transport my marketing attributes from Development System to Quality to Production Environment ?
    I have my TRMS set up. But since Marketing Attributes don't get assigned to any TR I am finding it difficult to port them.
    Regards
    Vishal Mani

    Hi Gregor,
    CRMD_MKT_TOOLS works fine to move the Marketing Set/Attributes form one box to another box (eg: dev -> qty), as part of data migration - my ABAPer wrote the ABAP function to default the Marketing Attributes in dev. based on SAP number(s) generated in dev. (eg: S0000000129) but these number are not the same in another box (qty) as they are system generated. When we moved his code to qty. data migration is failed. My question is - what is the best approach or logic to deal with such situations
    Cheers,
    Peter J.

  • Error while transporting the badi from dev to quality server

    Dear Freinds
             Iam getting the error  " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
            i expended the error (with return code as 8)  and i found th below errors
    Multiple active implementations for definition HRECM00_CALCBASE
    Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
    AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
    The errors affect the following components:
        BC-DWB-CEX (Customer Enhancements)
    What exactly this error iam not able to trace . Before releasing the object from the
    development server i have see any error's are there the extended check hasnt given me any errors either.
    The help for this error says that
    "Procedure
    Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
    You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
    i have did what sap has said ............. i can see that in the quality server a custom badi
    of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
    any one have idea on this error pleae let me know.
    regards
    saymala r.

    hi Raju,
    i tried after giving full access but again same error:-
    please see the error log below:-
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset PETFAS
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
    BPF: Error reading master data
    No access to environment 'PETFAS'
    End of data checker messages for Appset PETFAS
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
    Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    any suggestion..
    thanks,
    Ambika

  • Transporting GRC Configuration from Dev to Quality

    Hi,
        I am in the process of wrapping up configuration in Dev for the GRC applications. I would like some information on how to transport configuration of Workflows (initiators, stages, etc..), Mitigation controls, Rules/Risks in CC, FF configuration.
    Also has anubody configured a User Exit for FireFighter IDs so as to now allow them to login directly into the backend.
    Thanks in advance.

    AE and CC both have methods of moving content from one system to another.
    In AE have a look at Configuration -> Initial System Data. The Export Data option will allow you to move Roles and Workflow conifg etc. It will create a compressed filed that you will then insert into the destination instance.
    In CC you can download your rule set and upload it into the destination system. Go to Rule Architect -> Utilities -> Export Rules. A text file will be created that you can then import into the destination instance.
    In FF the only configuration that I know you can transport is the defintion of the Reason Codes. All other "config" data will have to be redefined in the destination system/client.
    Lastly, I have implemented the User Exit correction a couple of times now. It works as designed. Once applied to your system, when a firefighter ID is used to log directly onto SAP a message box will appear stating that direct logons with firefighter IDs are not allowed.
    Hope this helps

  • How to transport process chains from dev to quality ?

    I have developed few ip s ,dtp s , transf etc for few iobj. Few are available and few are not in Q. I know if all are available how to move a pc but in this case, what is the best approach to move all the respective objects related to that pc into Q.
    I mean do i have to manually verify what is available in Q and then move the missing dtp,ip,tran etc first ...and then move the pc or..... I can just send the respective dtp,ip ,tran etc while transporting the PC. That is my doubt.
    I have many objects (dtp,ip,trans)and almost 20 pc need to be moved to Q   .Experts, Please suggest the best approach.
    Thanks,

    Thanks Jaya. Can you please tell me what do you mean by ...first the objects and the process chains need to be moved..... anyway we are moving the objects along with the process chains rite, ..do you mean if anyother obj is locking the obj which is needed for this pc .....for ex I have global_data and I have selected that chain and put necessary obj.
    Its showing the chain after collecting the objects. Now do i have to change it to before and after and make the dispaly to list and then compare the obj from Q which are not existing .....and then check or uncheck the respective objects which are not existing and then transport it.
    Can u pls tell me if I am doing right ?
    Edited by: Daniel on Dec 12, 2011 10:10 AM
    Edited by: Daniel on Dec 12, 2011 10:12 AM

  • Re: Error occurred while transporting a request from dev to quality in BW

    Hi BW Guru's,
    I have done minor enhancement on one Master Data Data Source.  The transports went fine in R/3 side.  But in BW system it is giving an error message
    There is no DataSource with these attributes
          Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
       The errors affect the following components:
    So this is the error message can any one help me how to move further analysis on this issue.
    Thanks in Advance,
    Venkat

    Hi Venkat,
    The problem is during Replicate if the datasource in the target system or during trasport of the InfoSource related.
    In this second situation try to transport the Transfer Roules of the InfoSource with all related under/bottom objects, the system will include the Replicate of the DataSource.
    Check also if the mapping of the sender and receiver system is correct: Tools --> Mapping of the sorce system...
    Ciao.
    Riccardo.

  • Aggregation level transportation from dev to quality

    Hi,
    I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

    Hi,
    you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
    Brgds,
    Marcel

  • Error while transporting Data sources from DEV to Qual

    System :  SCM 5.0 (SP 8),  BI 7.0  (SP 12)
    1) We are trying to transport Data source objects from Development server to Quality server.
    2) Data sources of Type R/3 and Web Service.
    3) We are able to transport the objects from Dev.
    4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
    Please help... Thanx in advance..
    Regards
    Manoj

    HI tanu,
    could you let me know how you have solved this issue.
    which object not active.
    i am having the same issue now.
    kris

  • Transporting SLD objects from DEV to PROD

    Hi,
       I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
    Thanks!!
    Regards,
    Miten.

    Hi,
    How to handle SLD for Tranporting Dev to Quality ser
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    Transporting XI from DEV to QA
    Transporting XI from DEV to QA
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content  .htm --> Configuring Groups and Transport Targets
    Look into this blog for how to export / improt IR and ID objects,
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
    /people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Re: Moving project from Dev to QA
    Error while exporting/transporting the Business system from Dev to Quality
    Transporting the scenario frm Dev Server to PRD Server
    transporting data from Dev to quality  using CMS
    Regards,
    Phani
    Reward points if Helpful

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Transport a request from one server(quality) to another server(production)

    Hi All,
    I want to transport a request from one server(quality) to another server(production)
    Can we transport a request from quality to production programatically i.e. by using programing logic.
    Regards,
    Swarup

    Hi,
    It cannot be done programmatically. Although it can be automated by basis guys. They configure it in TMS (Transport Management System). You can check it using STMS. (if you are authorized to view it).
    Transport path are defined in TMS.
    For Automated Transport configuration is done in TMS.
    Generally automatic Transport are not setup between quality and production. Changes are first tested in Quality and then Transported by basis team either periodically / individually.
    In case of manual transport Transport Request can be imported in production using STMS_IMPORT transaction in production. (Basis guy will do it for approved Transports)
    If there is no direct connectivity - Basis people copy "data" file and "co" file and Transport it to target server (This is generally not the case in Quality - production as Transport path is always defined).
    Regards,
    Mohaiyuddin

  • How to transport modified query from Dev to QA??

    Hi All,
    I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
    Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
    What steps or procedures do I need to follow for this please?
    Thanks for your time,
    Regards,
    Reddy

    Reddy,
    BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
    Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
    hope this helps a little..
    Good luck
    Mavi

  • Can we move the Organisation structure from DEV to Quality to Production?

    Hi Experts,
    Can we move the Organisation structure from DEV to Quality to Production?
    If yes, I believe that we have to change  backend details at some areas.
    Please any one provide procedure and precautions for doing this, In general how we have to proceed?
    Thanks
    Reshma

    Hello Reshma,
    See program documentation from PFAL transaction (ALE distribution of HR Master Data).
    You will need:
    - an evaluation path,
    - a distribution models for sender DEV > receiver QUAL and sender QUAL > receiver PROD for correct message type.
    Regards.
    Laurent.

Maybe you are looking for