Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

Similar Messages

Transport SLDm repository, directory objects from Dev to Prod

Hi Forum,
I heve a development XI system and a production XI system,
and seperate SLD for each of them,
In development SLD i have created,
1 business system (third party)
1 product and software component
in Repository of Development XI,
i have a file to file scenario,
in directory of Development XI,
i have configured the scenario,
Now i want to transport everything (as explained above) from Development to Production XI system ....including SLD things ...
please tell me the procedure and sequence
Edited by: rana brata de on Jan 18, 2008 9:16 AM

Hi,
Check the links below for transporting the Objects from DEV to PRD.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if helpful

Can not transport from DEV to PRD (Hang up)

Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
   ==> Stop all TP running in OS level
   ==> Delete all pending job in Import Monitor (with truck logo)
   ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

Hi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff

Transporting SQ01 Customer Query from DEV to PRD

Hi All,
I am not sure whether I am in the right forum, but maybe you still can help me.
I created SQ01 for Customer Master query in our DEV environment, and i assigned t-code for the query.
Can i transport it in our PRD? Or it is more advisable to create the t-code in PRD directly?
Please note that the query is both existing in DEV and PRD.
Hoping for your positive feedback.
Thank you.

Hai TINA,
Hope you would have created T code using SE93 for your query program.
and your SQ01 program may be like this, and in the program the bold letter differs from client to client.
AQ FU SYSTQV000003XXXXXXX===
AQ IC SYSTQV000003XXXXXXX===
So while transporting it may give error that the program is not in the client, or while executing the T CODE it may give dump.
Hence create the query in production client and create the T code for the program and assign to the users.
Some tips may be helpful:
1. Always Use T code : SQVI to create the ALV report, user friendly that SQ01.
2. In case if you are making Customer master details report, if you are include all customer master tables, in case for some customer if some details were not maintained then the details will not displayed.
In that case, in the joint between two respective tables, right click and change it to Left Outer join.
3. If some data is replicated, then need to change the table path, like in case of billing always start from Biling item then to Billing header.
Regards,
Mani

To move Interfaces from dev to prd/qas

Hi Experts,
I have created interfaces in XI developement system and now want to move it QAS and PRD system
How should i go for that....do we need to define business system for QAS and PRD and make all the configuration in ID again ?
Thanks in advance.
Vishal

Vishal,
Check this documents for help on this transition:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
and also this for more info:
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards,
---Satish

What is the best way to port complete applications from DEV - Test - PRD?

Hi,
One of my customers recently asked me, Supposing I do the complete integrations and modelling in SOA Suite on the DEV Environment. Then,
What is the best way to port complete applications from DEV -> Test -> PROD ??
Also, since the URLs in use in the DEV environment would be very different from other environments, what is the easiest way to maintain them, and to build in Access Control mechanisms ?
Best Regards

Hi AJ,
Nice PDF !
Though the PDF does give a basic idea as to how we can go about the deployments using ANT and EM in Test and Prod, it doesn't really give extensive details. For eg. ANT would obviously need huge ANT scripts to be written for migrations to multiple Test servers, etc.
Similarly, when we talk about EM, does it mean each of the services has to be manually deployed on Production ?
I am sure we would be looking more towards a fully automated solution. No ?
Best Regards
Nitin

Error migrating Master Repository from Dev. to Prd, Environment

Hi,
We are trying to migrate our development environment (dev_env) to production (prd_env), so for this we are doing the following:
- We create a Execution Work Repository (prd_env)
- We create a Master Repository (prd_env) with different internal ID (dev_env)
- We export one scene from dev_env and import to prd_env
- We export Master Repository from dev_env and import to prd_env, but in this point we have problem with the import wich say
"com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ### KEY com.sunopsis.res.object / DwgDuplicationTools.GeneralImportObjectFailureMsg### a"...".run(Unknown Source)Caused by: java.sql.SQLException: ORA-02291: integrity constraint (....) violated - parent key not found"
Please, some one help us with this issue, thanks!!!

Hi,
Both your Prod and Dev are in same platforms?
Normally Dev we do on windows and production in Linux.
IF, your case is above. then create another schema in same platform(DB and OS ) and import the master and work repositories in Insert update mode from dev.
After import, re-export this newly created repositories and try importing into your production.
I have faced the similar issue and after following the above process, I am able to import my master and work properly.
If you are still not able to resolve this issue after following the above way.
Then try export you Logical and Physical Schema instead of master repository.
While importing , please import the Physical topology(Topology) and then the Logical Topology.
Thanks,
Nagarjuna

BPEL process Deployment from DEV to PRD

Hi,
I have a question on how to move deployment from one DEV to PRD. I have BPEL subprocess in my process and calling them WSDL. Every subprocess is exposed as webservice. When i move main process to PRD/QA, the main process points DEV WSDL. How to change the main process to point to subprocess.
Could you advise me how to deploy BPEL process form DEV to QA/PRD ?
Thanks,

Asuming you are using 10.1.2.0.2
When developing BPEL processes, make sure your partner-links to other BPEL processes are using the same host name. From JDeveloper it will use your workstation name. CHange this to "localhost". Furthermore JDeveloper is using 9700 as port number, whil ethe application server is using 7777. CHange the OC4J configuration of JDev that it will use port 7777 instead of 9700.
Now you can basicly deploy your BPEL processes to other environments. If you are using adapters make sure that the JNDI naming is implemented on all the environments, (oc4-ra.xml file).

Need to create a transport of SD config data from DEV 120 to DEV 110

During our conversion some config modifications were mad in DEV 120 instead of DEV 110.
I need to get the config:
SPRO> Sales Distribution> Billing> Billing Documents> copy sales documents to Billing documents
From 120 to 110.
I have tried to force a transport creation in 120, and used SCC1 to import into 110, but no data comes over.
How can I force all the data from these config tables to load into a transport so can send from 120 to 110.
Thanks,
Bev Barbush

Hi Beverly,
I would try bringing this transport in via STMS and then reviewing the import log to see why the data is not going across. What I've normally seen in this situation is the data was not correctly added to the transport before it was imported.
I would NOT copy config tables back from the QAS system. Copying select portions of config data from one system to another is likely to break all sorts of logical relationships between tables.
Have you guys tried running a config comparison between 110 and 120 to see what the actual differences are?
Hope that helps.
J. Haynes

Xcelsius based on BEx query. Issue when transporting from DEV to PRD

Hi all,
I am facing an issue as described below:
I created dashboard based on bex query in Query Browser. Everything is working find in DEV. Then I transport the dashboards to PRD, I also use the override settings to point from BOD-BWD to BOP-BWP, my connection changed accordingly. Everything seems ok. One day when we stop the BOD system. Dashboards in BOP are not working. Then I start BOD, everything is ok then.
The issue I got:
Internal: BOP....
External: BOD.../XcelsiusWebServices.
Is there any chance that dashboard in BOP using the BOD xcelsius web service?
I have resolved this issue by:
- Open the dashboard in BOP, then in each of the query in Query Browser, I clicked edit and click next, next until end.
- Then re-save to BOP, then it is working
For your information, I used BEx query in Query Browser only, not use BIWS.
Dashboard 4.0 SP04
BW 7.3
Does anyone face this issue before? And how you resolved it? Please kindly share with me.
Thanks,
Quan Vo.

Hi Quan,
Found few points regarding this.Please check might help you.
Migration of Dashboards (using Query Panel) on BI 4.0 environment - Business Intelligence (BusinessObjects) - SCN Wiki
Regards,
Javed

Error while importing datasource from Dev. to Qlty

Hi guys,
I have transported a data source to quality from development system. while importing the same in quality it states error below.
WSPK901533 imported to WFP & it ended with error(RC=8). Please check.
Source system ZSTGLDV110 does not exist
No rule exists
Source RSDS GECPC_GFO_COD_GPR ZSTGLDV110 does not exist
Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
Please let me know some once has any idea..
Its too urgent.
THanks in advance
Peter

Hi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks.

Transporting a SAP Query from DEV to PRD

Hi,
We created a Query Report using SQ03, SQ02 and SQ01 for Travel Report in DEV and is working fine. Now, we want to move this query to PRD. For this, we tried create a Transport using SQ02>Environment>Transports and finally a transport request was generated and moved to PRD.
But the requisite Query, Infosets and User Groups are not there in PRD. Are we using the correct approach to Transport a Query to PRD?
Please help.
Regards,
CMC Team

1. While saving User Group in SQ03, save it in correct Package (not as Local Object) and a Transport Request will be created.
2. Create Infoset in SQ02 and save it in same Transport which was created in Step 1 above.
3. Create Query in SQ01 and again it in same Transport which was created in Step 1 above.
Release this Transport Request and move to PRD.
Hope it will help you.

Transporting BeX requests into Quality from Dev

Hi All,
I want to know while transporting the BeX requests, is there any special procedure ?
I have created the BeX transport request and now my changes are recorded successfully in this request.
What are the next steps ? In my organisation the Basis team takes care of transporting the requests. So what is my task before I ask the Basis team to transport?
Regards,
Srinivas

hi,
once changes were captured,and if all the infoproviders and infoobjects and other related objects were active in the other system do release the request.
if transport is taken care by basis, simply give them the request number.
Transporting BEx Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Ramesh

Transport Org Model in CRM from Dev to QA

Hi All
We have replicated the Sales Org structure from ECC to CRM using the report CRMC_R3_ORG_GENERATE in the Development system.
SAP Note 548202 advises that this report for replication of Org Model should be executed only once to Initial load the Org Structure from ECC to CRM and then the Org Structure must be transported to QA and Production using the Customizing client of the CRM server.
Pl provide the approach procedure or any pointers for the same.
Thanks in advance
Best Regards
Ram Sushanth

Hi,
the process is described in the notes 327908 and 548202. There you will also find the mentioned reports RHMOVE30 and RHMOVE50.
Best regards
Thorsten

Transporting Org model changes (deletions) from DEV to QAS

Hi All,
We have Org model created in CRM Development server, which was earlier transported to Quality server using the report program RHMOVE30.
Now, based on unexpected changes in the requirement, in Development server we had to make some changes to the Org model, like added new org units and positions (which is fine, as we can do a delta transport), but the problem is that, we have also deleted few Org units and positions in Development server (these org units are already available in Quality), now my issue is that, how can transport these changes to Quality (is is possible delete the org units in Quality using a Transport Request).
Is there a way out to even transport the deleted entries, so the they get deleted in Quality as well.
Thanks in advance for your time.
Regards

Hello
Maybe you create a transport request including your new org structure and run report RHMOVE30. There is also a flag "delete objects" in that report that can can delete individual org units.Just enter the org unit ID and click on that flag.
Transporting org structure is very delicate. My personal advice is: If there are not too many orgs to delete and the task can be done manually in your QA system, just do it manually.
Regards
Joaquin

Transporting active version of datasource from DEV to PRD

Similar Messages

Maybe you are looking for