Transporting BAPi 's Test Data Directory(like Variants), How?

Hi Experts,
I hv created some Test Data Directory elements for BAPi, in DEV, so, now, I wanna to move them to TEST system!
Pls. let me know,
1 - How to get it done? Is there any SAP prog./Transaction/Menu path?
Thank you,

Hi,
In DEV system:
As usual, I entered some inputs in FM screen, then Saved-Floppy them, the system prompted me, to give some name, I hv given my_s_cust_#_1000000 name. So, its stored in TEST DATA DIRECTORY. I hv been used it from TEST DATA DIRECTORY for my trials.
So, now, I wanna to move my_s_cust_#_1000000 to TEST system, How?
Hope U got it!
thanq.

Similar Messages

How to download and restore test data directory / se37

Hello comunity,
ahead of me lies a system refresh. in tc se37 according to several function modules i have recorded several test-data-sets in test directory. After the system refresh they will be gone. i assume there are ddic-tables behind my personally saved test data records.
now i wonder, does anyone know a functionality (program, fm, etc.) on
1. how to download "my" test data directory entries ?
2. how to restore them into the test data directory once after the system refresh ?
for sure, somebody does. please gimme a hint. answers will be rewarded with credit points.
Thanx in advance!
Gunther
Message was edited by:
Gunther Stauch

Hmm...
Maybe this is useful -> table EUFUNC
Check the FMs from Function group SEUJ ,
FM RS_TESTDATA_GET looks promising-reading.. and so also RS_RFC_TESTDATA_GROUP_TRANSFER
Maybe you can write a small program which downloads all the contents of the table and later updates it using one of the above FMs
Also check with the BASIS team about the options -> There are many options available like maintaining the previous settings... (I know that passwords may not be refreshed similarly this option may also be available..)
REgards,
Arun

How to creat Test Data Directory

Hi Experts,
I want to create a TEST DATA DIRECTORY for the following function module CLOI_CHANGES_UPL_31. How to create this?
Actually now i have some process order numbers. Using this how to create the test data directory??
Plz guide this.
Point will be sure.
Mohana

Hi Mohana,
      Test data directory is similar to variants in reports.
      After executing the function module give some input and click the save button . It will prompt a name . Give the name and click enter. So this test data is saved in the test data directory.
   So that you need not not give the test input again and again. you can simply click the test dat directory and select your test data .
Regards,
Charumathi.B

Table for test data saved in SE37 (Test data directory)

Hello Experts,
When we save the test data in SE37 its going to be saved in test data directory, in which table of the data base its going to saved?
Thanks in advance,
Sandhya

Hi Sandhya,
The test data will be stored in a table called 'EUFUNC'
But it is a cluster table if you want to fetch the data from that table you can use macros to fetch the data.
Here is the macro syntax for your reference.
data : d102n_exportkey like functdir.
data : begin of te_datadir occurs 10,
         dataid like eufunc-nummer,    "Schlüsselnr. für Testdatenimp.
         stepid(3),                    "PBO/PAI-Eintrag
         seqid like eufunc-seqid,
         datum like sy-datum,
         uzeit like sy-uzeit,
         title(40),
       end of te_datadir.
te_datadir is a internal table
d102n_exportkey-area = p_file.
d102n_exportkey-progid = p_fname.
d102n_exportkey-dataid = dataid.
IMPORT te_datadir
       FROM DATABASE eufunc(fl) ID d102n_exportkey.
Regards
Krishna

Test Data Directory

Hi All,
I have a requirement in which I have to test some function modules using the standard SE37 test functionality.
Below is my requirement
1) The test data for the input parameters for these functions is present in flat files.
2) I have to read the data in the flat files and load into the parameters and then update the test data directory for the function modules
Is there any standard function modules that upload parameter data to Test data directory? There are some functions like SFCS_FA_PARAMETER_GET in package SEUJ. But I am not sure how to use them.
If anyone has any idea on how to save the data to test directories, it will be of great help.
Thanks,
Anand

Just enter the values and press save.It will ask for comments enter some name.
When u execute teh FM next time u can take the values from the directory.
Make sure that if u r making some changes in the FM then teh test data wont be available.
reward if this helps.

Test data for the ABAP Function

Hello Experts,
Can you please provide me the valid test data for the function modules?
    /SCA/BIF_WORKINPROCESS_BO
                       and
    /SCA/BIF_WORKORDINF_MS
Thanks and Regards,
Kuldeep Verma

Hi ,
If u want to use the same data to test your function module then we can use this button. To use this button simply press F8 --> give the test data --> And then save this test in the test directory using the SAVE button.
--> Next time when retest it then their is no need to give all the other information just press Test Data directory..
Hope you understand.
Kuldeep

Fuba or Class to access the variants of a test data container in ABAP

Hi there,
I think, that I might remember, that there was once a piece of code (Function call or static class method) that allowed one to access the variants in a testdata container within ABAP.
Anybody ever heard of this before?
Thank you & cheers,
Gregor

You can use class "cl_apl_ecatt_tdc_api" for reading test data.

Test Data Gerneration for BAPI "BAPI_PO_CREATE1"

Hi All,
We need to debug the BAPI "BAPI_PO_CREATE1" in ECC(6.0) , since we need to test data we tried to use the Report
"FBGENDAT" and we set the parametes FBGENDAT to 'X' in the SU01 also. but we are not able to get the test data in ECC for the BAPI.
Can any one know what would be the problem
Regards
Channappa Sajjanar

Hi Channappa,
Please follow the steps described under the chapter FBGENDAT:
http://wiki.sdn.sap.com/wiki/display/SRM/Shoppingcarttransfer
and go through the steps of the note 539978 again.
Important that you:
- execute the report FBGENDAT with the parameter A or B, and fill the function name BAPI_PO_CREATE1 into the input field
- check if indeed you have set the FBGENDAT=X for the RFC user.
Regards,
Peter

Test Data Required for Bapi's

Hello All,
I am a newbie to SAP.
I have been tasked with finding the test data for a few BAPi's but have been unable to do so on my own.
I have tried using the respective transactions to find valid test data and have looked at all the imports, tables in the given bapi but have been unable to find the required data.
I am working on ECC 6.0.
I ask all the learned folk out here to please lend your expertise.
The list of BAPI's are :-
1. BAPI_FUNCLOC_GETLIST
2. BAPI_CONTROL_RECEPIE_GET_LIST
3. BAPI_PROCORDCONF_GET_HDR_PROP
4. BAPI_PROCORD_GET_LIST
Edited by: aashrith on Nov 13, 2011 5:03 PM

I suspect that they want you to build some test data rather than find some. And for what you need, there is a lot of master data required. It may or may not be there already, but the task you have defined is not that simple as one or two posts would be required. I would google "SAP PPPI test data" or something similar. You will probably find simple lists of tasks to build a sample Control Recipe or Process Order.
Regards,
Mike

Icloud keeps inserting fake calendar events and fake contacts - looks like test data

In the last few days, meetings for someone in Palo Alto and contacts with fake data [ (555) 555-xxxx ] have been showing up on my wife's iPhone. It looks like Apple test data.
Any ideas??

Are you sure no one else is using the same iCloud account? That would account for it (no pun intended).

How to fill field with test data in alv grid display

hi all,
i m adding field TEXT to the structure for displaying grid.
i m modifying program like this
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF FS_OUTPUT .
 TEXT(20) TYPE C.
 INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: fs_output like table of alv_output.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'TEXT'.
WA_FIELDCAT-seltext_l = 'Abteilungs Struktur'.
wa_fieldcat-tabname = 'ALV_OUTPUT'.
WA_FIELDCAT-COL_POS = '13'.
APPEND WA_FIELDCAT TO P_GT_FIELDCAT.
this is what i have write for diapalying field. but my question is how to fill test data with field TEXT.I m writing like this but not executed in the aboove grid dispaly statement.
loop at alv_output.
*alv_output-text(20) = 'abcdefgh'.
*modify alv_output.
*endloop.
plz tell me how to fill test data

hI..,
Your table declaration has to be like this..
TYPES : BEGIN OF FS_OUTPUT .
INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: ALV_OUTPUT LIKE standard table of fs_output initial size 0.
loop at alv_output into fs_output.
fs_output-text(20) = 'abcdefgh'.
modify alv_output index sy-tabix from fs_output transporting text.
endloop.
Now give this table alv_output to the GRID_DISPLAY function module..
you will get the required output !!
Plz do remember to close the thread when ur problem is solved !!
reward all helpful answers !!
regards,
sai ramesh

Reg: Test Configuration with Default variant

Hi Guru's
I am new here.. Guide me to achieve this.
I do created the Test script ,Test data and also the Test Configuration
Whats my problem is I do run the TC with external variant (File that i have mapped) .
its works fine but Default variant is not triggering all other variant are triggering.
What to do to run all the external variant including default variant . Guide me with steps.
Thanks in advance
Regards
Anandh

Hi Anandh,
ECATTDEFAULT is a special variant which is not intended to be uploaded from external files.
If you use the download option to prepare your external variant file as a sample, you will see that ECATTDEFAULT is deactivated by using * in front. It's only downloaded to the sample file for giving the scripts import parameter defaults as a reference.
If you like use these default values for individual fields of other variants simply leave those fields blank in the other variants.
To have your test executed with the whole record of ECATTDEFAULT simply copy the *ECATTDEFAULT line in your external data file and give it an other similar name, e.g. ECATTDEFAULT1.
Kind regards
Jens

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

Populating the test data in table of IDES ECC 5.0 in Oracle

Hi Guys,
I have installed IDES ECC 5.0 successfully without any errors. But I don't see the data in tables like PA0001 etc. Can some body give me the steps for populating the tables with test data. I was able to sign on using DDIC in client 000.
Thanks,

you are using wrong client, login into client 800. check tcode SCC4 to check which client you want to log into.

How to avoid multiple users accessing same test data via parameterization in LR??

i am using LR11.5, i have the following test data&colon;
TestData
1
2
3
4
5
when i run this script from Controller with 3 users LR picks it as user1->1, user2->1, user3->1
How do i achieve this case: user1->1, user2->2, user3->3 ??
Any help would be great.

I have a related question. i created 2 websites/domains then i went to users and created 2 seperate "network" users then i went to ftp and selected each website and added only user A to site A and user B to site B. what's weird is that when i try to ftp using either of the users it seems to land on the same site. i looked at shared security for the folders and it only shows user a on site a folder and user b on site b folders. am i doing somehitng wrong or is this how it works in mountain lion server? i just want to give the domain owner ftp access so they can manage their files and only thier files. i also had to turn on open directory so that it would not create a local user but a network user. do i need to turn that off and just deal with having a bunch of local users as ftp user? i want to host multiple websites on the server and NO users remote on to server besides ftp.
edit 1: i only have 1 IP running on the server which i don't think it has any affect on this but thought i mention it :-)
edit 2: i just noticed one more thing that may help. i used filezilla to remote in using both users, one at a time. it seems to allow both users in but then it shows same directories. i then created a file using the one that was not supposed to have acces and it never sows up. but if i remote desktop to server i can see the new file in the correct folder. so it may have something to d o with the directory listing.

Transporting BAPi 's Test Data Directory(like Variants), How?

Similar Messages

Maybe you are looking for