Transporting BeX requests into Quality from Dev

Hi All,
I want to know while transporting the BeX requests, is there any special procedure ?
I have created the BeX transport request and now my changes are recorded successfully in this request.
What are the next steps ? In my organisation the Basis team takes care of transporting the requests. So what is my task before I ask the Basis team to transport?
Regards,
Srinivas

hi,
once changes were captured,and if all the infoproviders and infoobjects and other related objects were active in the other system do release the request.
if transport is taken care by basis, simply give them the request number.
Transporting BEx Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Ramesh

Similar Messages

Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

Transport SLDm repository, directory objects from Dev to Prod

Hi Forum,
I heve a development XI system and a production XI system,
and seperate SLD for each of them,
In development SLD i have created,
1 business system (third party)
1 product and software component
in Repository of Development XI,
i have a file to file scenario,
in directory of Development XI,
i have configured the scenario,
Now i want to transport everything (as explained above) from Development to Production XI system ....including SLD things ...
please tell me the procedure and sequence
Edited by: rana brata de on Jan 18, 2008 9:16 AM

Hi,
Check the links below for transporting the Objects from DEV to PRD.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if helpful

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

Transporting Org model changes (deletions) from DEV to QAS

Hi All,
We have Org model created in CRM Development server, which was earlier transported to Quality server using the report program RHMOVE30.
Now, based on unexpected changes in the requirement, in Development server we had to make some changes to the Org model, like added new org units and positions (which is fine, as we can do a delta transport), but the problem is that, we have also deleted few Org units and positions in Development server (these org units are already available in Quality), now my issue is that, how can transport these changes to Quality (is is possible delete the org units in Quality using a Transport Request).
Is there a way out to even transport the deleted entries, so the they get deleted in Quality as well.
Thanks in advance for your time.
Regards

Hello
Maybe you create a transport request including your new org structure and run report RHMOVE30. There is also a flag "delete objects" in that report that can can delete individual org units.Just enter the org unit ID and click on that flag.
Transporting org structure is very delicate. My personal advice is: If there are not too many orgs to delete and the task can be done manually in your QA system, just do it manually.
Regards
Joaquin

Unable to view transported BEx reports in Quality

Hi Experts,
We had moved two BEx reports from development to quality. The transport requests were created using the 'Transport Connection' tool.
The transport request was moved to the Quality system without errors (status 0), but we're not able to view the BEx reports in the quality system.
Regards,
Ram Pandey
[email protected]

Hi ,
Have you collected the the report with all the objects and hope the infoprovider is already transported for the same.
Collect properly once again and check the same.
Regards
Rahul Bindroo

Need to create a transport of SD config data from DEV 120 to DEV 110

During our conversion some config modifications were mad in DEV 120 instead of DEV 110.
I need to get the config:
SPRO> Sales Distribution> Billing> Billing Documents> copy sales documents to Billing documents
From 120 to 110.
I have tried to force a transport creation in 120, and used SCC1 to import into 110, but no data comes over.
How can I force all the data from these config tables to load into a transport so can send from 120 to 110.
Thanks,
Bev Barbush

Hi Beverly,
I would try bringing this transport in via STMS and then reviewing the import log to see why the data is not going across. What I've normally seen in this situation is the data was not correctly added to the transport before it was imported.
I would NOT copy config tables back from the QAS system. Copying select portions of config data from one system to another is likely to break all sorts of logical relationships between tables.
Have you guys tried running a config comparison between 110 and 120 to see what the actual differences are?
Hope that helps.
J. Haynes

What is the use of transporting BEx query to production from development ?

Hi !
if create a query by copying an existing query and make some modification in production and sent it to client..and client is happy as it satisfies all his requirement .
Then what is the use of creating Bex query in development and transport it in quality and then to production if we can create directly in production ?

Hi,
There is something called as SOX compliance..and three system landscape.
First of all you are not suppose to make changes to standard qeuries.
You can give it to the client a new copied query wirth required changes and it is very much accepted as well but how will it be tracked for future support.
Suppose there is a change in the underlying cube...this will affect all the queries and the new copied query which no one knows about will be affected too.How will you test it if its workinf fine with the new flow.
If you want to do the testing in production as well.... then you are not following SAP guidelines and may be you are violating the contract signed by you and your client.
Thanks
Ajeet

Reverse transport of process chains ( Quality to Dev ) ?

HI all ,
i need to transport the process chains from Quality to development .
i have started collecting the process chains by using only necessary objects as grouping ,
here i am getting all the objcets like DTP , INfopakage , infoobjces , etc and Source system also .
i dont want to transport all the objests & just want to transport only process chains .
can any one plz tell me how to proceed with this .
Thanks ,
Edited by: BIuser on Dec 22, 2011 4:05 PM

Hi,
Please check the steps mentioned by Kamal,
Source system conversion after transport - RSA1->Tools->Conversion of Logical System Names.
Check the thread,
No Source system exist
Also in your case you are trying to move some objects from Quality to Development.
So kindly check with Basis also if they have maintained proper transport paths.
Regarding BDLS runs, during system copy one bw system will be copied on different BW system having different R3 system connection. In such cases basis does several BDLS runs where the target BW systems will have transformations of source BW system (source system). Once the basis completed BDLS runs the source system of source BW system will be changed to target source system in target BW system.
Please check with Basis if you are doing a system copy.
Thanks,
Vinod

Issue on transporting a Request to quality

HI,
i have created a Function module(FM) . for that FM i have created a BOR in SWO1. I created a TR for the function module. but while releasing it on development it said 'It is locked by a TR D01k990678'(that means somebody has created a TR earlier for that function module). On client side they released the Tr that i have created without releasing the earlier TR(D01k990678)
The fumction module is now available on Quality but the BOR is not available.I have used the (R3TR SOBJ) as object type inmy TR. still then it didn't came to quality. what is the problem?
regards
sandeep

Hi,
but they have alraedy released my TR without releasing the older TR forcefully.
Everything except the BOR created on development came to quality.
While transporting my TR forcefully they got the error log. Which is as below.
<b>Object type zincdata_d couldn't be generated.
Report/prog statement missing or prog type is I
data object not yet implemented
error occur during posthandling WSO_OBJTYPE_AFTER_IMPORT
SWO_OBJTYPE_AFTER_IMPORT BELONG TO PACKAGE SWO
the error affected the following component
BC_DWB_TOO_BOB</b>
I am not using any include . Everything is fine on develoment.
weather i need to create a TR for BOR and transport it or releasing the older TR will resolve the issue
regards
sandeep

To access a table in quality from Dev

Hi All,
Is it possible to get the data from a table in quality or production thorough a program in development, If yes then please tell how?

Yes it is possible,write simple RFC Function module,
create RFC Function module in development ,move it Quality or production.
now call the RFC Function module in se38 at Development and main rfc Destination.
so you will get the data from production or quality.

Transport Org Model in CRM from Dev to QA

Hi All
We have replicated the Sales Org structure from ECC to CRM using the report CRMC_R3_ORG_GENERATE in the Development system.
SAP Note 548202 advises that this report for replication of Org Model should be executed only once to Initial load the Org Structure from ECC to CRM and then the Org Structure must be transported to QA and Production using the Customizing client of the CRM server.
Pl provide the approach procedure or any pointers for the same.
Thanks in advance
Best Regards
Ram Sushanth

Hi,
the process is described in the notes 327908 and 548202. There you will also find the mentioned reports RHMOVE30 and RHMOVE50.
Best regards
Thorsten

Putting stock into Quality from the Unrestricted stock

Hi,
I have a material which is having the stock in "unrestricted Use" , but I want to move the stock to "Quality".
I have already done the GR for my material.
Please let me know , how I can put the stock back to the Quality. As I want the stock in the same batch in which its showing the stock in unrestricted.
If I cancel the GR Document, will the Stock be moved to the quality after the document cancellation ?
Please help me to resolve my problem.
Regards
Toshi

hi
1.pl activate the QM view in the, by extending the QM view from MM01.
2.IF QM is there already then enter the inspection type 01 for Goods Receipt Insp. for Purchase Order. or if the GR is related to Production then
04 Goods receipt inspection from production
3.then cancel the GR or reversr 102 for which you have doen GR already.
4.Now re do GR, at the time of GR check the stock type (it should be Quality inspection) the do the posting.
Before posting to Quality ensure
1. materia should ahve inpspection plan (QP01)
with operations assingned with MIC(QS21)
with out the above master data you cann ot process the quality lot
-ashok

To acceess the table in quality from dev

Hi All,
Is it possible to get the data of a table in quality or production through a program in development, if yes then please tell how??

Hi,
You need to wrap your select statements in a RFC and use it in your program.
The destination should be your quality / production server.
Or you can use RFC_READ_TABLE.
Thanks and regards,
S. Chandra Mouli.

Aggregation level transportation from dev to quality

Hi,
I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

Hi,
you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
Brgds,
Marcel

Transporting BeX requests into Quality from Dev

Similar Messages

Maybe you are looking for