Transporting Business systems
Hi,
I am facing a quite interesting scenario. The business systems in QA and PROD were manually created and only the IR objects were transported using File system.
Now we have 10 new business sytems in Dev and I do not want to do the old process (which is also not the suggested approach). I have set up the transport groups for dev and QA in dev. My question is I have set up transport groups for the business systems already in QA. While transporting the SLD( which is being done for the first time), will the business ssytems being transported have any impact of the applications running in QA??
My main concern is will the difference in GUID's impact the applications. If I am too confusing here is a small example. Business system BA1 was created manually in QA and has interfaces using it in QA. Now I have a new Business system BA2 and I want to do the SLD transport in the actual way. So I have set up transport groups for BA1, BA2 in DEV. After transporting it to QA, will the transported BA1 from DEV to QA impact the interfaces using it in QA.??
-Ken
Hi Ken,
I had to do the same long ago. It did not pose any problems. Did not try it with latest versions though.
I think the new GUID will be overlaid on the old one, do not remember exactly.
regards
Shravan
Similar Messages
-
Can there be more than one transport targets for a business system in sld
Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
PadmajaHello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark -
Error while exporting/transporting the Business system from Dev to Quality
Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
RameshGo through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful -
How to make an entry in transport tab of business system in SLD
Hi gurus,
In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
What is this used for and how to make an entry here.
I'm a basis person and i'm configuring XI for the first time. Kindly help.
Regards,
Priya1. Yes , you have to maintain target business system for the EACH BS in PROD system.
2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and BS of production server.
3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
Regards,
Balaji
Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM -
Transport target for business system not found in System Landscape Director
Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
ChanduHi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri -
Transport of Business System in IDoc scenarios.
HI All,
I am doing IDoc scenarios so I am using Business System say PIS_800 . Now i have moved these scenarios to quality system and my Business System name is supposed to be PIQ_800.
I am using simply file import-export for transport. After transport my Business System name is coming as PIS_800 only.
Can anybosy plz suggest me how to change it to PIQ_800? This part is quite new to me so detailed explaination will be helpful.
Thanks,
Atul.Hi Atul,
In DEV
1) Export the TS & BS of SAP R/3
2) Export the TS & BS of DEV XI Server
In QTY
1)Import the TS & BS of SAP R/3
2) Import the TS & BS of DEV XI Server
3) Create the TS for Quality SAP R/3 & Corresponding BS also which is pointing the QTY Server Details
Now create the Transport Groups and Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
With this Configuration, the DEV BS will be replaced by the QTY BS.
Thats all
Regards
Seshagiri -
Business system Doesnot change while transporting
Hi All,
When Transporting my business system from DEV to QA, my business system doesnot change. I already checked in SLD that my DEV business system is pointing to the correct system in QA. Also DEV and QA are on one SLD only.
You guys will be highly appreciated.
Regards,
---SatishYou also have to make sure that the DEV/QAS Business Systems are associated to the respective DEV/QAS XI system. For that, open the BS in SLD, go to the "Integration" tab and check the "Related Integration Server".
Also, make sure that both the DEV BS & DEV XI are inside the same "DEV" transport group in SLD, as well as the QAS BS & QAS XI are both in the same "QAS" group.
Regards,
Henrique. -
DEV- QAS : Obligatory transport target for business system not found
Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
BrazilHi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh -
Regarding Business System Transport
Hi,
I have some queries with Exporting the Business System between the DEV and QTY servers
I have gone through this Help file and have few queries
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
We are in 2 seperate SLD's
In DEV Server
I have created BS as SAP_Dev
I want the BS naming in Quality server as SAP_Qty.
Queries:
1) Do i need to create the Quality BS i.e SAP_Qty in DEV Server inorder to configure Transport Groups??
2) Do i need to create the Quality BS i.e SAP_Qty in QTY Server????
RegardsHi Bopanna,
Go through this links..
File transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS for SAP Exchange Infrastructure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
How to handle Xi with CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
Configuration of CMS in Central NWDI & SLD to transport XI objects:
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
XI Software Logistics Solution III: CMS:
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
In ID u need to change the communication parameters manually.
Reward points if it isuseful..
Thanks,
Satya.. -
Transport does not map business systems
Hello,
we have a problem when transporting XI configuration objects (via normal file export/import, not CMS). In the SLD, we have configured business systems
T01CLNT010, belongs to group dev and has transport target PROCLNT010
T01CLNT020, belongs to group dev and has transport target PROCLNT020
the strange thing is the first business system is not converted correctly to the prod business system after transporting the XI config from XI dev to XI Prod. For the second business system, that works fine. I compared the entries in the SLD, both look fine. But one does not work, the other does.
For the one that does not work, the transport goes fine, does not show any error, but just does not convert the name. (which of course will lead to an error when trying to activate the objects, because T01CLNT010 does not exist in XI prod). So it seems it cannot find the SLD transport target for that object.
Does anyone know how XI exactly finds out how to convert the business system while transporting it to production ? How does it find the connection between the XI business system object and the corresponding SLD entry ? Just by name ? Or is some kind of internal GUID used which may have been broken ? Can I see that anywhere ?
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ? Or are dependent objects (e.g. receiver det.) then lost ?
CSYDoes anyone know how XI exactly finds out how to convert the business system while transporting it to production ?
The only thing that matters here is properly defining the Transport Targets.
How does it find the connection between the XI business system object and the corresponding SLD entry?
Not sure about this but I think the name in the transport target would suffice for this requirement. Also, make sure that the groups are properly defined and target SLD has all business systems properly maintained.
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ?
How will you be doing this re-association? If you are thinking of changing the Business system name in ID manually, then it would mean almost complete development in ID.
Regards,
Prateek -
XI - Transport of ID via CMS / Business System Replacement
Dear Experts,
We have installed SAP XI, and we now have our QA environment installed. We are transporting our objects from DEV to QA through CMS.
In the SLD, we have defined 2 business systems : SAP_R3_DEV and SAP_R3_QA. Each of this system is assigned to a group (DEV_GRP and QA_GRP). We have added dependencies in the "Transport" section of the business systems (i.e. SAP_R3_DEV becomes SAP_R3_QA when transporting).
So, everything seems to be configured.
Now, we are transporting objects from the Integration Directory using CMS / Transport Studio. My understanding was that occurences of "SAP_R3_DEV" should be replaced by "SAP_R3_QA", but this is not working.
<b>Where am I wrong ?</b>
<i>Our configuration :
XI 3.0 - Netweaver 2004s SP10
We have 3 different SLDs (DEV, QA and PRD)
</i>
Your help would be greatly appreciated !
Regards,Here are more details...
We have multiple SLDs : One for DEV, one for QA and one for PROD environments.
We do all the configuration in the DEV SLD, and then use Export / Import functionality to replicate data in QA / PROD environments. We did also a full SLD Export / Import in case something was missing.
In many forums / blogs, it's indicated we should go in SLD, under "Business Landscape" on the first screen, and under the Business System we can find the "Transport Target" field.
In our version of XI, which is 2004s SP10, we must go in SLD, under "Business Systems" on the first screen, and under the Business System we have a "Transport" tab in which we must indicate both a "Target Group" and a "Target System".
We have created an XI_DEV group and assigned business systems SAP_R3_DEV and SAP_XI_DEV
to it.
We have also created an XI_QA group and assigned business systems SAP_R3_QA and SAP_XI_QA to it.
In the "Transport" tab, we have configured XI_QA / SAP_R3_QA as the transport target for SAP_R3_DEV.
In the Integration Repository, we do our configuration using Business System SAP_R3_DEV.
When transporting, we tried both CMS and Export/Import methods. However, when importing in XI QA, we still see SAP_R3_DEV instead of SAP_R3_QA...
I hope this clarifies )
Thanks a lot for your time ! -
Business Package for Transport Management System & Travel Mangement System
Hi,
Is there any <b>Business package</b> available for <b>"Transport Management System" and "Travel Mangement System"</b>?
Please provide some link, if it is available.
Thanks in advance.
ManishHi Manish,
travel management is part of the ESS business package. As far as transport management, if you are talking about TMS capabilities for moving object in the landscape, go to https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio and search for "transport" You will find a thirdparty package for this.
Good luck.
John -
Obligatory transport target for business system SAPR3D not found in System
HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
PrakashHi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director -
Obligatory transport target for business system BS_DEV in SLD
Hi all,
We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P NHi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it. -
Business system transport problem.
Hi,
I am trying to impor the objects in directory system but i ma getting below erroe message while transport.
Business system XXX is not assigned a business system in group YYY.
where YYY is production group.
Wat i can figure out is I need to create the new business system and assigned that new business system to Production group in SLD.
Let me know whether I am correct or not?
chiraghello Chirag,
1)First Create the Business Groups on Both the Server (DXI ,QXI,PXI )
- DEV_GROUP for Development Environment
- QA_GROUP for Quality Environment
- PRD_GROUP for Production Group
2) Assing the Business Groups to respective Integration Servers
3)Assign the Quality Business Systems to QA_GROUP and Production Business systems to PRD_GROUP
Automatically all the Business Systems are assigned to respective Integration Servers.
4)Select the Business System Ex : DB2QA00. Under the Details select Transport :
Click on the Add/Change Target..
5) On Click of Button we will see the Target Group and Target Business System.
Here for DB2QA00 target Business System is DB2PRD00 under PRD_GROUP.
regards
Gangaprasad
Maybe you are looking for
-
How to pass a list of parameters to a query?
Hi, I use OracleXE 10 Database with JDeveloper 11g. In my project I use a Toplink mapping to get access to the database (Toplink Object Map file). This mapping xml file is called crmMap.xml. In the crmMap.xml file I define a mapping to a "User table"
-
ASA5505 Can't pass traffic between inside (private) & outside (private)
10.15.50.0/24 <---> 10.15.50.254 (inside / ASA5505 \ outside) 10.60.15.253 <---> 10.60.15.254 <--- (cloud) ---> (eventual destination 10.15.60.0/24) Goal: 10.15.50.0/24 traffic will communicate with 10.15.60.0/24 while block all other. Current confi
-
Hello to my always excellent community who always gives me the right answers. I switched my iPod Nano library from my PC to my new macbook air with the help of an excellent and courteous gentleman. The info on my Ipod and on iTunes still shows my Ipo
-
How to re-post Unposted Travel Transactions in Posting-Run
Hello Experts, In theory all Travel Expenses in all approved trips ends up in General Ledger via Posting Run management which is purely an ATR(Accounting To Report) function. But in practice we have realised few of the transactions did not get poste
-
Check material availability and goods issue with different BOM no
dear expert: please find the below scenerio 1. finished goods contain finished garments which contain washed garments accordingly>sewing garments>print panel>cut panel>fabric 2. before going production we need to check all the component materials as