TRANSPORTING CHAIN AND INFOPACKAGE

Dear experts,
I've transported, from development to test, a chain and an InfoPackage which is included in this chain.
The problem is the InfoPackage doesn't appear into the chain transported, although it was already into the modeling, because this InfoPackage had been previously transported with other order. Besides, the transport's method execution ended with warning (4).
The warning is the follow:
Post-import methods for change/transport request: 902761
Follow-up action RS_AFTER_IMPORT for ISIP L started at 20090306143729
Start of the after-import method for object type R3TR ISIP (Mode d'activació)
InfoPackage ZPAK_01GSDO6PG4H6P29K8KDWORJG6, source system integra changed by source system gaudi_pre in import
Start of the after-import method for object type R3TR RSPC (Mode d'activació)
Version 'M' of chain ZG_CAD_ATR_11_TEMP was saved without checking
Chain ZG_CAD_ATR_11_TEMP Was Activated And Scheduled
Start of the after-import method for object type R3TR RSPC (Mode de supressió)
Start of the after-import method for object type R3TR ISIP (Mode de supressió)
Follow-up action RS_AFTER_IMPORT for ISIP L ended at 20090306143753
Post-import methods of change/transport request 902761 completed
Start of subsequent processing ... 20090306143729
End of subsequent processing... 20090306143753
I don't know hot to discover the problem. Please could anyone give a hand.
Than you very much in advance
Jorge

Hi,
When u transport a chain it always appear at the target system deactivated, just create an order, modify the chain, activate, it will ask for an order, select the order previously created and now see if the infopackage appears.
If the chain was already at the target system and you don't active it, you will see the chain in the last active valid option.
You can delete the order of the target system if the chain appears ok.
Hope it helps.
Maybe you speak this language too:
Bones,
Quan transportes una cadena sempre apareix al sistema destí com a desactivada, per arreglar-ho crea una ordre al sistema destí, modificar la cadena, activala, et demanarà una ordre, hi poses la ordre creada anteriorment. I comprovar si la cadena apareix amb el paquet correcte.
Si la cadena esta en el sistema destí i no la actives al transportarla de nou, el que es veu es la ultima versió activa, o sigui com estava originalment.
Un cop fet, pots borrar la ordre del sistema destí.
Espero que t'ajudi.

Similar Messages

Process chain and Infopackage?

Hi,
I am creating the process chain in that I am completely delting the data contents from the Cube and then I am loading data(this is our requirment).There is an error
A type "Complete Deletion of Data Target Contents" process cannot follow process "Execute InfoPackage" var.ZPAK_11VS7H4SRVUOPFQDDJO9V7SSG in the chain
Please help me to resolve this.
<removed by moderator>
Thanks,
Vasu.
Edited by: Siegfried Szameitat on Jan 26, 2009 1:23 PM

Hi Vasu
It seems that BW doesn't want to have an Infopackage and then a Deletion, it may consider that you can't do it even if the loading is not the same.
You should add another step between, like Indexes for your infocube ...
Kind Regards
Mickael

Restart process chains and infopackages

Hi
Our system was down from last 5 days and I have to check the loadings and reschedule the crashed loads.
The person who used to check and monitor loadings is on a holiday and I am not too sure how to go reschedule process chains
We have 4 hrs, 12 hrs and daily loads in a process chain.
Can anyone advice me how to reschecule them.
Many thanks in advance

Hi
You have to Start them manually by Start -- Change selections -- Immediate -- No other go in your case as far I know.
You can manage through sm37 also -- in the Initial screen check only Scheduled -- You will get all the scheduled jobs -- release it and change it to your time to start automatically for this day.(Make sure that you are following system time for it)
Hope it helps.
Edited by: Aduri on Dec 18, 2008 5:59 PM

Process Chain and Info Package Transportation?

Hello All
Case 1
How to transport a Process chain and a Info Package Individually?(first time from DEV to QA)
Case 2
I have 9(IP1 to IP9)infopackages and 3(P1 to P3) Process chains and in each Process chain I have 3 Info packages like IP1,IP2,IP3 in P1 and so on.,
Now is it necessary to transport Infopackages and Process chains individually or is it enough to transport Process chains only(If v transport Process chains will the Infopackages will also transport)then how to assign a request to each one?
What I mean is,all Infopackages are in $TMP(Package),and Process chain is also $TMP,Now is it necessary to change the package for Infopackages as well as Process chain and Tranport only PC,Iam confused here,can anyone help me out?
Many thanks
balaji

Hi Balaji,
If you have created new infopackages then you have to transport them. It is not necssary to transport the info-packages if you have them in the process chain but have not changed them.
Also you cannot transport any BW object with $ tmp package. Assign a package and then transport the objects.
The best way to transport the process chain is from the RSPC screen. Click the transport button there and collect all the objects and transport them.
Bye
Dinesh

Can't see Update rules and infopackage in the transport connection

Hello, experts!
I need to transport newly created (and activated) update rules and infopackage from Dev to QA environment. When I open transport connection and select infosource, I don't see new update rules and infopackage. There are few update rules for different source systems in this infosource and I can see all of them in the transport connection except for this new one.
Your help is appreciated.
Thanks, Alina.

in Transport connection please select ur higher level Object say Infocube...and collect data flow before then you will ur Update rules and IP

Transport Request and Process Chain - Together?

Hi,
Is it safe to transport a request while a process chain is being run?
Need your expert advice. Thanks!

Hi Winnie,
It should not affect the transport. Still a question, Does the transport request contain anything from the process chain?. If you could wait for sometime then do it after the process chain run is completed. Though I think unless you change anything in the Process chain like infopackage selection, etc. the transport should go through.
Bye
Dinesh

TM Document to Create Collective Shipment and Transportation Chain

Dear Friends,
Can anybody give me a manual to create:
Configuration as well as Transactional Process...
1. Collective Shipment
2. Transportation Chain
Regards,
Sreehari
Edited by: Sreehari Kondapalli on Sep 11, 2009 5:31 PM
Edited by: Sreehari Kondapalli on Sep 13, 2009 8:35 PM

Hi Doak,
Yes you need to create individual shipment document in Transportation chain.
For Example : when the trucks go from their respective shipping points to the harbor, the freight documents should not also contain main leg and subsequent leg information. When you create texts, you would not know if they are supposed to be valid for the preliminary, main or subsequent legs.
In order to avoid such limitations, we would recommend that you denote a transportation chain using multiple shipment documents. You can create these shipment documents almost automatically by using collective processing.
If you want depict a transportation chain within a shipment document, you must also accept the limited functions available to you.
The reason: Almost all shipment document functions refer to the document as a whole:
1.Outputs can only be printed for the entire document, not for individual legs
2.Handling units can only be created for the entire document, not for individual legs
3. The same is valid for texts, deadlines in general, etc.
Hope this provides you some clarity. Reward points if helpful.
Regards
Srikanth.A

Problem with porcess chain and request

Hi experts, I need help!!
Description of the problem:
There are three ODS that load daily information through process chain to a Infocubo. The information is loaded to BW from View generated for a data base of Oracle.
Process chain for the three ODS is equal, I explain the one procedure to them:
1- It initiates the chain .
2- Blocks the View.
3- Load of data through of infoPackage.
4- If the load finishes well, then the data is delete of the View, the data is activte in the ODS and it arises to InfoCube, and if it finishes bad so unblocks the View and finishes process chain.
5- Then, reconstruct the Index.
Happens that in the three ODS when we loaded the information erase request loaded previously, then the historical one of the loads in the ODS does not stay. The three infopakages used to load the information to the ODS does not have labeled the option to erase the destiny of data, and it does not have it marked. The ODS do not have marked that option.
When I do it manually east problem does not happen. I erased process chain and I returned to create the chain porcess but it did not solve the problem.
Thank you

I just checked the documentation and found that your code is incorrect. IAlternativeName::StrValue contains value for an email address, a Domain Name System (DNS) name, a URL, a registered object identifier (OID), or a user principal name (UPN). It doesn't
contain string value for directory name (and other non-mentioned types). Instead, you need to instantiate an IX500DistinguishedName interface and initialize it from an alternative name value:
class Program {
static void Main(string[] args) {
String RequestString = "Base64-encoded request");
CX509CertificateRequestPkcs10 request = new CX509CertificateRequestPkcs10();
request.InitializeDecode(RequestString, EncodingType.XCN_CRYPT_STRING_BASE64_ANY);
Console.WriteLine("Subject: {0}", request.Subject.Name);
foreach (IX509Extension ext in request.X509Extensions) {
if (ext.ObjectId.Name == CERTENROLL_OBJECTID.XCN_OID_SUBJECT_ALT_NAME2) {
CX509ExtensionAlternativeNames extensionAlternativeNames = new CX509ExtensionAlternativeNames();
string rawData = ext.RawData[EncodingType.XCN_CRYPT_STRING_BASE64];
extensionAlternativeNames.InitializeDecode(EncodingType.XCN_CRYPT_STRING_BASE64, rawData);
foreach (CAlternativeName alternativeName in extensionAlternativeNames.AlternativeNames) {
switch (alternativeName.Type) {
case AlternativeNameType.XCN_CERT_ALT_NAME_DIRECTORY_NAME:
IX500DistinguishedName DN = new CX500DistinguishedName();
DN.Decode(alternativeName.RawData[EncodingType.XCN_CRYPT_STRING_BASE64]);
Console.WriteLine("SAN: {0}", DN.Name);
break;
default:
Console.WriteLine("SAN: {0}", alternativeName.strValue);
break;
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Process chain AND process

Hi,
I have a process chain that has two parallel processes of loading DSO and Infocube data. There are two infopackages on one side and two on the other side. The two processes are connected with and AND process at the end and after that there is a datastore activation process.
When I executed the process chain, the infopackages on both sides started loading data. The two infopackages on the left side finished first while the second infopackage on the right side had not finished yet when the AND process errored. I get the following message:
This AND process is not waiting for event RSPROCESS , parameter
47VKUORHMXQKR2AN73AVAR0C9
After the AND process I have a Datastore generation process and I want it to continue only when all infopackages have been loaded.
Why does the process stop at AND even though all infopackages have not finished yet?
thanks
Michalis

There was no error message in ST22 or SM37. There was very little info to go on. I just deleted the requests and run the process chain again and there's no error. However the process chain does fail at a later step.
Update Datastore Object Data (Further update)
I don't know what that further update is for. It was automatically selected in my Process chain when I selected the infopackage for the DSO.
There's a MESSAGE_TYPE_X error.
Information on where terminated
 Termination occurred in the ABAP program "SAPLRSM2" - in "RSSM_MON_WRITE_3".
 The main program was "RSBATCH1 ".
 In the source code you have the termination point in line 2659
 of the (Include) program "LRSM2U16".
 The program "SAPLRSM2" was started as a background job.
 Job Name....... "BI_PROCESS_ODSPROCESS"
 Job Initiator.. "CSPAPADM"
 Job Number..... 14103000
Source Code Extract
Line SourceCde
2629 CALL FUNCTION 'RSSM_GET_TIME'
2630 EXPORTING
2631 i_datum_utc = rsreqdone-tdatum
2632 i_uzeit_utc = rsreqdone-tuzeit
2633 IMPORTING
2634 e_timestamps = l_s_status-t_timestamp.
2635 IF rsreqdone-tstatus(3) = icon_green_light(3) OR
2636 rsreqdone-tstatus(3) = icon_red_light(3).
2637 CALL FUNCTION 'RSSM_GET_TIME'
2638 IMPORTING
2639 e_timestamps = l_s_status-ts_proc_ended.
2640 l_not_yellow = 'X'.
2641 ENDIF.
2642 IF l_not_yellow = 'X'.
2643 CALL FUNCTION 'RSSTATMAN_SET_STATUS'
2644 EXPORTING
2645 i_s_status = l_s_status
2646 i_with_commit = 'X'.
2647 IF l_s_status-t_status(3) = icon_green_light(3) AND
2648 l_s_status-dta_type = 'ODSO' AND
2649 t_data-aufrufer <= '70'.
2650 CALL FUNCTION 'RSS2_CALLBACK_ODSADM_ODS_SUCC'
2651 EXPORTING
2652 i_ods = l_s_status-dta(30)
2653 i_rnr = l_s_status-rnr.
2654 ENDIF.
2655 ENDIF.
2656 ENDLOOP.
2657 IF sy-subrc <> 0.
2658 IF t_data-aufrufer <> '09'.
2660 ENDIF.
2661 ELSE.
2662 IF l_not_yellow = 'X'.
2663 CALL FUNCTION 'RSB1_OSNAME_TO_ICNAME'
2664 EXPORTING
2665 i_osource = g_s_minfo-oltpsource
2666 * I_OSTYPE = RSAOT_C_OSTYPE-TRAN
2667 IMPORTING
2668 e_icname = l_icname
2669 EXCEPTIONS
2670 name_error = 1
2671 OTHERS = 2.
2672 IF sy-subrc = 0.
2673 CALL FUNCTION 'RSAWB_MAINTAIN_DTA'
2674 EXPORTING
2675 i_method = rsatr_c_dta_get
2676 * I_TYPE =
2677 i_objvers = rs_c_objvers-active
2678 i_dta = l_icname
Any idea what that means? Also do I need that further update step in my process chain?

Error while transporting transformations and datasource Urgent need Help

Hi all,
I have been working on this problem for a few days now. I created an ODS object, transformations, DTP and I am using a R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Rule 1 of transformation () is not valid and is being deleted
Rule 2 of transformation () is not valid and is being deleted
Error occurred during post-handling RS_After_import for TRFN L
Ended with return code : ==> 8 <===
Please do let me know what could be the problem. Please do respond ASAP......
if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

Hi voodi,
I just followed the exact sequence that you mentioned. I transported the
DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
data source ... no errors
2) ODS ..... no errors
3) Transformations .... Error....same as mentioned in my earlier post....
4) DTP and Infopackage ....Error similar to whats mentioned ...and it says that transformation does not exist.
Could it be an issue with Source System Translation ..... I dont know much about it .....could you please tell me what it could be and how to resolve it. I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
please do give me your feedback....thank you.

Errors While Transporting Transformations and DTPs

Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843

Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice

Error while transporting PCs and Info packages frm dev to qa

Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.

Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani......

Error in redwood job chain for Infopackage

Hi,
We have recently installed redwood for handling sap jobs and are able to run all the job chains with job step in abap program successfully.
However, for APO and BW job chains we have intermediate step for executing BW infopackage where the job is getting failed with the below error:
SAP/BW Error Message: rfc call failed 089: Job BI_BTC<infopackage_name>has not (yet ?) been started
The preceding abap job steps are getting executed successfully. After the infopackage step is failed the consecutive steps all fails.
This problem is common to all job chains with infopackage.
Any help is greatly appreciated.
Regards,
Sandeep.

Hello Anton,
We are facing the same problem: Same log error message.
The infopackage is correctly started and ended in BW.
Here our versions:
Redwood Explorer 7.0.4.2 SP2
BW : SAP_BASIS 70016
 SAP_BW 70018
Do you think applying SAP CPS SP3 would solve the problem?
Or can we solve it by modifying some specific parameters?
Thanks in advance.
Regards;
Mathieu

To find only master data process chains and its infopacakges!!!!

Hi,
I have a task to remove the setting in the scheduler of directly assigning to data targets instead of PSA and then to data targets of the whole system!!!
i should not touch though the transactional info packages settings!!
these infopackages must exist in process chains -
how to go about this??

Hi,
If I have understand your point, then you want to change the setting of the infopackages that includes in the Process chain pertaining to the master date.
Then you can change the settings directly in the processing tab.
Or if you don't want to change the settings of the IP s that are in the Process chain,then go to RSA1 >> Select those IP s >> rigt click and copy it.Then you can change the settings there.
You can run each IP manually.Or if you want the same chain just with the changed settings,then copy the chain and put this new IP in place of the old one and schedule the chain.
If your doubts are cleared then kindly assign me some points.
Regards,
Debjani..

Process chain--failed infopackage--urgent....

Hi Experts,
can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
what could be the reason and how to make the process chain run successfully after it gets triggered.
i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem.

Hi Experts,
can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
what could be the reason and how to make the process chain run successfully after it gets triggered.
i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem.

*TRANSPORTING CHAIN AND INFOPACKAGE*

Similar Messages

Maybe you are looking for

TRANSPORTING CHAIN AND INFOPACKAGE