Transporting extended MC02M_0ITM extract structure in LO Cockpit

I have extended the extract structure via the maintenance screen for 2LIS_02_ITM to include BUKRS and KTWRT. However, when I transport this into PRD environment, the two fields were not appended into the extract structure. As a consequence, the user exit failed as reference to these 2 fields cannot be made. Any idea what's the problem in the transport ??
.APPEND
BUKRS
KTWRT
.INCLUDE

Hi Siew,
Welcome to SDN!!
In your transport make sure you had these:
1. datasource- Active
2. Extract structure
3. User exit program
4. Appended extract structure
Bye
Dinesh

Similar Messages

  • Transport Extract Structure

    Hi Guys,
    I am unable to Transport the extract structure. I have created a Datamart and want to transport the required extract structure for the same. I am facing Transport failures errors since the extract structure does not include in the Transport.
    The datasources and all related objects are included in the Transport but get an error relating to Extract structure.
    I see these extract structure is the $TMP package and I am unable to include the same in the Transport.
    1) Please let me know how do I include them in the Transport.
    2) Would also want to know if we include the dataources in the Transport will that solve the purpose or should we include extract structures explicitly.
    Please help me on this.
    Thanks in advance.

    This is a Datamart generated and I am facing extract structure error in my Transport after it is imported to the Quality environment. I have Transported the Datasource but the Extract structure for the same is not Transported.
    I am aware of the $TMP package, I am unable to change the Package details please help me in which all ways we can try to include the object in the Transport.
    I have tried editing the extract structure and also tried changing the Object Directory but unable to include in a Transport.
    Please let me know what needs to be done.
    Points will be alloted for sure.
    Thanks

  • Error while maintaining structure in LO-Cockpit

    Hi All,
    I am trying to maintain an extract structure in LO-Cockpit but it is throwing an error saying "Entries for application 18 still exists in extraction queue".
    How could I solve this?
    Best Regards,
    Nene.

    02 - Purchase
    03 - Inventory Controlling
    If you are changing the Purchase Extract Structures then delete MCEX02 like this...
    But it is not advisible to delete the delta queue.Before doing modification make sure that LBWQ is empty i.e all the changes from R/3 got loaded to BW.
    Regs
    Gopi.
    Message was edited by: Gopi
    Message was edited by: Gopi

  • Changes in Logistics DataSource Extract Structure

    Hi All,
    We intend to transport our enhanced extract structure of our Logistics DataSource. We know that extraction queue and delta queue must be emptied first before the transport starts.
    However, we are wondering whether a re-INIT of delta also must be done or not. At this moment, we have delta up and running already.
    Please advice. Thanks.

    Hi Reddy,
    Thanks for your fast reply.
    No, we don't need that historical data. Perhaps, to be more specific, we are wondering whether a Re-INIT without data transfer should be done again or not ?
    We have two cubes. One is old one with up and running delta. The other is new one which we are going to transport soon.
    So, we plan to use same delta infopackage later for these two cubes.
    The concern is now about the delta.
    Please advice again. Thanks.

  • Change to Extract Structure Doubt

    Hi,
    Our Basis Folks are trying to install Patch 6 ST-PI 2005_1_700 in ECC. I refered to OSS Note 328181.
    For this Patch do we need to delete the Set up Table and Fill it again? And How about Init Delta in BW?
    Please suggest me. Any answers will be appreciated with Points.
    Kind Regards
    Mahesh.N

    Hello,
    Yes you have to delete the Setup table data before that as per the OSS Note you have to clear the delta queue data which cannot be recovered after changing the extract structure. So execute the BW Delta Infopackages and make sure there is no delta records in RSA7 or LBWQ.
    Then you can delete the setup table using LBWG and implement the patch.
    1. Make sure that the following steps are carried out at a time when no updates are performed so that no data is lost.
    2. Start the update collective run directly from within the Customizing Cockpit. Up to PI(-A) 2001.2 , this collective run exclusively concerns the V3 update. As of PI(-A) 2002.1, depending on the update mode setting of the application, the collective run concerns either the V3 update or the update from the extraction queue ("Delta Queued", see Note 505700).
    3. Load all data of the respective DataSource into the BW System.
    Now you can make the change.
    After a change you can no longer use the statistical data already recreated. If such data still exists, you should delete it (Transaction LBWG).
    We recommend in particular to upload the data immediately after a restructuring and (after checking in BW) delete them from the restructuring tables.
    Moreover, the update log (Transaction LBWF) can no longer be read. Post a document in this case so that the last log entry is overwritten. This log entry then has the correct new format of the extract structure.
    As of PI 2000.2 the program RMCEXDELETELOG is available. It can be used to delete log entries.
    But if there is any change in lenght of any field of the extract structure, then you have  to reload the entire data again in BW otherwise a Init without data transfer will do.
    But what is the patch all about? Please follow the instruction given in the OSS Note 328181 - Changes to extract structures in Customizing Cockpit.
    Thanks
    Chandran

  • Inactive the extract structure

    hi friends,
               i like to know why we inactive the extract structure in lo cockpit extraction?
    thanks in advance
    kumar

    Hi,
    Check this thread will solve ur issue..
    Re: Inactive Extract structure?
    Thanks

  • Changing the extract structure MC02M_0ITM

    Hi,
    When I am trying to change the extract structure MC02M_0ITM, I am getting the following error:
    "struct. from appl. 02 due to open v3 proc. not changed -> Long text" , "Message No. MCEX 140". All I was doing  was adding more fields from communication structure to extract structure and I am getting above error message. Can someone shed some light on that. Appreciate your help. Thanks.
    Wen.

    Hi Wen
    You have to
    1) Clear LBWQ Queues if you are using Queued delta
    2) Move all records from RSA7 - two times to BW under delta update call from BW - so that the records stored for repeat delta are also emptied
    3) Empty the statistical set-up table - LBWQ transaction in R/3
    then you can modify the structure in LO cockpit
    Arvind

  • Extract structure does not exist at the time of transport

    HI ,
    i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis  is
    Extract structure does not exist at the time of transport
    Long text of error message:
    Technical information about the message:
    Message class....... "RD"
    Number.............. 041
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    please provide the  solution asap

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

  • Transporting Extract Structures for Business Content Data Sources

    Hi
    We have added a new field to the 2lis_13_vditm data source and when i am trying to capture it in the transport, only the data source is getting captured and not the extract sturcture. When I go to the Object Entry Directory of the Extract Structure, it shows package as MCEX and person responsible as SAP. Should i need to change this and capture it in a transport or is it enough if i capture the data source alone
    Thanks
    Rashmi.

    Hi,
    If you transport the DS that should do it . The extract structure is standarad one and it would show as SAP, however you would have added the new filed using an append structure and if you go to the append structure and view the transport request you should be ble to see the transport request and your package in it.
    P.S : if the Append structure is not under any transport req then check if it has already been transported
    Cheers!!
    Ashwin G

  • How can we assign Extract Structure of datasource to request to transport

    Hi,
    I was trying to transport datasource. But it ended with errors due to unavailability of extract structure. So plz guide me how I can assign Extract structure of datasource to request to transpport.
    I tried to assign in RSA6 but here there is no option to extract structure to assing to request.

    Hi,
    Normally when you get the screen to select and hide the fileds and then save it, you will get the extract structure collected automaticaly in your TP request.
    Hope it helps
    Regards,
    Srini

  • Include extract structure in transport requst

    hi,
    im unable to include extract structure in transport requst ?
    I have activated the MM related datasources 2lis_02_hdr  in R/3 dev and assigned them to a workbench reqst.
    i have noticed  that there was no extrac structure in that transport request...
    pls can anyone tell me how do i  include extrac strc
    thanks

    Guys any updates on this. I'm also facing the same problem.
    Thanks in advance,
    Rash.

  • Extract Structure not Being transported with custom Datasource

    I'm having trouble transporting a custom datasource from BW 3.5 dev to QAS.  The datasource is coming through and showing up in RSA6 but when I click on it I get the following error:
    "The extract structure ZOXDBW0123 of the DataSource ZRSPCTRIGTEXT is invalid
    Message no. R8444
    Diagnosis
    An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view."
    Any ideas?
    Thanks,
    Luke

    Thanks for your input.  We managed to get through one of the errors on about the 8th try to transport everything together.  It might of had something to do with the way things were being grouped in the packages.
    So now were just getting an RJ044 Error: "ZRSPCTRIGTEXT: Only tables and views are permitted for extraction". 
    I think it may be some kind of program error after all, cause our basis consultant took a look and couldn't figure it out at all either.  The transport says that everything is going through, but the view were extracting from is still not showing up in QAS.  He suggested we blow everything away and try building the datasource again from scratch.  So if we can't figure it out today we may try that route tomorrow. 
    Anyway, thanks again for all the help.

  • How to Transport Extract Structure and datasource

    Hi all!
    I had recently made enhancements to 0CO_PC_PCP_01 datasource.When I transported the datasource and the Extract structure, I noticed that only the append structure has been transported. The datasource has not been transported.
    Could some one tell me how to collect the datasource and the Appended extract structure and transport them.
    Thanks,
    S.P

    Hi Jaya,
    I had already tried this already. When I selected the dtasource and selected the transport button. I got the message, action successfully executed. When I checked in SE09, I see no transport. Unless it asks me for a transport request, I will not see it in SE09, right.
    ~S.P

  • Logistics Extraction Structures Customizing Cockpit, (URGENT)

    Can someone give me a step by step way of how to use and apply Logistics Extraction Structures Customizing Cockpit. Eric Thanks.

    Pls have a look at the engagement rules of this forum:
    /thread/117232 [original link is broken]

  • Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

    Hi, Experts:
    I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
    In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
    I have done the following in client 200:
    - Activated datasources for for PM 2LIS_17_I3HDR in RSA5.  
    - Made selection in RSA6.
    - Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
    - I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
       No extraction structure for event I3: Messages active
       Message no. MCEX106
       Diagnosis
       You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
       System Response
       Data for event I3 is not transferred to the BW interface.
       Procedure
       First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
    - I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
    - I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
    Would anyone please help me with what to do to fix this?
    Thanks,
    Jenny
    Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

    Hi, thanks for the reply!
    Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
    Thanks,
    Jenny

Maybe you are looking for

  • Hp officejet pro 8600 and macbookair

    My HP officejet pro 8600 was picked up by my new MACbook air without a problem, however each time i go to print or scan it will not connect unless I power off and on the printer. Then it works fine until next time I go to print-- I have to do same th

  • Can't scale pages to print in 10.6.8

    I just bought a second-hand Macbook Pro to handle e-mails and browsing at a holiday place, replacing an older notebook running 10.4. Each day for years I have printed a puzzle from the NY Times and scale it to a preferred size by the sequence <<comma

  • Where is my FaceTime icon

    My face time icon is no longer on my home page. How do I retrieve it?

  • Complement with Airport Express?

    Greetings, I have a Cat6 cabled home. The outside internet is pulled inside to the laundry room on the first floor where it then disperses into 4 other rooms. I currently use a Netgear WNDR4500 1000GB wirelss router in this area to share, but unfortu

  • Best way to parse this xml

    Hi, my xml file has this structure: <config> <settings> <engine>ON</engine> <monitor>OFF</engine> <debug>ON</engine> </settings> <rules> <rule> <scope>...</scope> <action>...</action> </rule> <rule> <scope>...</scope> <action>...</action> </rule> <ru