Transporting HR Report Category

Hi,
I have created a report category for a report.
and I have used this in other reports also.
I saved the report category in a seperate request and I have transported in first. Then all the reports using this report category are transported.
But this report category is not reflecting in target system.
Is there any specific procedure in transporting the report category.

Hi Charan,
There is no specific method other than what you have done for transporting rep category.
Just check your request contents once again whether the entries you made are present.
rgds...Sameer

Similar Messages

Problem with Transporting HR Report Category

Hi,
I have created a report category for a report.
and I have used this in other reports also.
I saved the report category in a seperate request and I have transported in first. Then all the reports using this report category are transported.
But this report category is not reflecting in target system.
Is there any specific procedure in transporting the report category.

Charan
When you transprot make sure your Report catogory is not overridden by other request
Do one thing finally means after all the report request has been transfered to prod.
go to dev client and do changes and save report catatogory and transport it to quality and chk
Hope it will work out.
Even i hv face similar problem i hv sorted it in the same way.
Regards

Transport of 'Report category Assignment' for LDB - PNP

Hi,
I am using LDB - PNP for a HR report. The screen works fine in the development server.
Once Transported to Quality and Production servers the screen changs to something else completely.
<b>I see that HRIN0013 under 'Report category Assignment' ( found in Attributes of program ) is not transported to
to quality server. How can transport HRIN0013 to
to quality server? </b>
I have used 'Report category Assignment' X__X2201 and it works fine.
I need your assistance on this. Help will be highly appreciated.

Hi sanchit,
1. This report category HRIN0013
   must be a sap standard report category,
   which must be a part of the LDB program.
2. Just check out in your QA and production servers,
whether this HRIN0013 is available for
selection or not,
   in the same screen, u mentioned.
ie. se38 -- 'Report category Assignment' Button
( found in Attributes of program
regards,
amit m.

To create HR report Category

Hi All,
Pls tell how to create HR Report Category.
I am new to HR Module.
Thanks in adv.
Nibha

hi nibha,
for report category creation:
Create a program using the transaction SE38.
Then again follow this menu path->GOTO-->ATTRIBUTES
Click on the button HR report category to use the existing report category
Select the radio button u201CMaster Data (Infotypes)
Click on HR report category
Give name of the HR report category to be create like ____0001(4 underscores 3 zeros 1) here follow the standards for creating the HR report category.
To create new HR report category, click on new entries
Give the report category name : ____0002 (this is an example )
Then save it under a transport request.
Click on allowable selection criteria->choose enter--> new entries
Get the fields from select option field with F4 help and give the values to be appeared in the selection screen of the LDB you want.
then save it.
Edited by: amit kumar on Apr 6, 2009 11:47 AM

Error While transporting Crystal Reports from BW DEV to Quality System

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

Error while transporting Crystal Report from BW dev to Quality system.

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

Selection-screen using HR report category

Hi friends,
I have a developed HR report using PNP ldb in which i have used the HR report category to specify my selection-screen.But still my requirment is not getting fullfiled.I require 1)Company Code
2)Payroll Period selection block also.
But even if i dont enter value in this payroll area it should excecute.As of now it throws an error message saying "No valid payroll area specified"
I want to generate report for any month given in other period of the payroll Area wrt company code.

As per your question, remember that, the period will be different for each and every Payroll area.May be same period will behave differenly like weekly, monthly, semi-monthly.. with different payroll area.
So the parameter payroll area will always be mandatory..

Help me about the Report Category !!

In a ABAP report program's "Attributes", we can set the Logical database (eg. in HR, it's PNP) , and then, we can select the "HR report category", for the report screen category setting. After we set the Master Data(infotypes), we will get the report with several pushbuttons in the first line, like Further Selections "Sort order" ...
So, my question is if I want to add some items into the "Sort Order" selection screen, how to do that ?
Thanks a lot
Tom

Hi Tom,
You can create the report category from SE38-> Attributes and then give the LDB name as PNP.
Now click on the HR report category button and proceed creating the new report category by clicking the create button.
The report category name should start with 0* or 7*.
Hope this helps you,
Regards,
Subbu.

Creating new report category in Abap HR

When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.

>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh

ABAP HR Report Category

What is the best Report Category for the selection fields personnel no, personnel area, personnel subarea, employee group, employee subgroup, organizational unit?
Thanks
Vicky

then create your own.. ie just copy this one & remove the unwanted fields..
pl take a look at this Re: hr report category remove selection fields..
~Suresh

Regrading report category in hr-abap

hi experts,
                 cud u plz tell me how to create our own report category with the help of spro what i want in my report category only personnel no,plant and payroll area,(payroll period in ranges) sud come ..plz help me regarding this.....
Message was edited by:
        ravi gupta

please see this link it was give as screen shot of the report category creation .
<a href="http://">http://www.sapdevelopment.co.uk/hr/hr_repcat.htm</a>
<b>if the link if not opening by double click   ...just   copy paste in the web .</b>
reward points if it is usefull ....
Girish

HR ABAP: HR Report Category: "Customer Specific Status" Name Change!

Experts,
I've successfully created a Custom HR Report Category and assigned it to my program. Report works fine, with all customized fields that i selected!
There is one field called "Customer Specific Status", which needs to be changed to our requirement. For instance, the existing field's text "Customer Specific Status" needs to be changed as "NS Status" ?
Helpful answers will be definitely awarded!
Thanks a lot!
Rgds,
Sundar.

Hello All,
I got the answer already!
Thanks!
Regards,
Sundar.

Dynamic selections in Report category

I am trying to create a dynamic selection view for a report category, while doing so i am not able to add any table to table dialog that appears, when i enter PA0001 it says PA0001 is not a table. Same problem for any table i try to insert.
Can anyone help me with a solution.
Thanks in advance.

In transaction SE80, i selected "edit object" button -> in the screen that pops-up i selected the tab "more"
In that tab i selected radio button "Selection View" and then selected create button
Then "Create Selection View" screen appears, there i selected CUS View, checked radio button "for any tables" and gave a name of view 'ZTEST' and pressed the continue button, A screen appears to enter tables, when i enter any table it gives the message Table not found.
When i try in other systems it works, not sure of the problem in our dev system.
Thanks,
Thirumal

Where do we specify Report category in HR Adhoc query

Hi All.
We have a standard query which shows a selection screen which is different in Production. When I went into the program behind the query and saw the report category, it is different in both the environments.
I am not able to find where do we specify report category in the HR adhoc query.
Can anyone please guide?
Also, how is this possible that a standard report has different report category in Development and production env. ?
Any help would be appreciated.
Aishi

Hi,
There is no place in query, to maintain report category. Whenever an query is created, this table gets updated with default report category depending upon the LDB used. Now if you want to change this default screen to some other screen, then this is the only table where you can change the report category for that query or program.
According to me, you have to maintain this table only, if you want different report category, since there is no place in query where you can do this.
Hope this helps.
Thanks,
Sarika.

Field Addition in Report Category

Hi All,
I Need to Add Additional Selection Field in Report Category.
Ie : In My case For TCODE : S_AHR_61016354 - Telephone Directory ..
For this SAP STD report I need to Provide PA0105-USRID Field in report Selection.
How to Add this field in the report Selection.
Thanks
Partha.

Hi,
Copy the Standard report and change the selection screen accordingly and insert the logic which you require to change. Do not change standard programs.
Thanks,
Vasu.

Transporting HR Report Category

Similar Messages

Maybe you are looking for