Transporting infosets from Development to quality and then to production

Hi,
I created a infoset in development under the Standard Area.
I want to move it to Quality and finally to production after the testing. When I created the infoset it never asked for any package and transport request.
How should I go about this ?
TIA
Rahul

when you are in transaction SQ02, click on the truck button (Transports)
you will get to the transport utility. This one allows to export/import infosets, usergroups and queries from a system to another.
select the type of objects you want to transport (you may need to do it once for usergroups and once for infoset + queries)
look at the Information button to know how it works

Similar Messages

  • Transporting an Object from Development to quality and then to Production

    Hello SAP Friends
    I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
    Please give some detailed Navigation...

    Hi Kiran,
    use transport connection to collect the objects to request, rsa1->transprot connection.
    use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
    in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
    after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
    remember to assign source system, click yellow box with X icon and mark the source system.
    after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
    take a look transport docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Re: Transport Organizer---
    transport query (bex objects)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    hope this helps.
    (Courtesy AHP from Re: transport)
    Bye
    Dinesh

  • Transporting ODS from Developement to Quality server

    Hi,
    In Quality server I am haveing ODS with out one navigational attribute included in it but it contains data.same is avaliable in development with navigation attribute object included in it.Now we want to transport this ODS from development to Quality.Kindly let us know if we need to delete the data from ODS in quality before moving this ods which is in the delevopment.Technical name for both ods is same.
    Regards,

    Hi,
    You don't have to delete the data. The transport will work fine. But, the more data you have, the longer the transport will take.
    Cheers,
    Kedar

  • Transporting Report from Development to Quality

    Hi,
    1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about  procedure & prerequisites .
    2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
    Regards,
    Rohit

    Rohit,
    As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
    Please follow steps below to make this feature available:
    1) Go to "Administrative  Analytics Settings" configuration element.
    2) Check the check box of " Allow the assignment of Business Roles "
    This will show one more Business role Tab when you are trying to assign the reports.
    Please see image for details.

  • How to Transport changes from Dev. to Quality and production

    Hello Friends,
    I've done the below changes in IR
    1.Added idoc in Imported Idocs
    2.Added new Interface Mapping
    3.Added new Message Mapping
    In ID:
    Chagned Receiver Agreement
    Changed Interface Agreement
    Please let me know how i can move the changes to Quality and Production..
    Pls. provide me the steps to create Transport and how to transfer.
    Thanks in advance!!!
    Best Regards
    Prasad

    Hi,
    By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
    We can do some changes to move
    Moving Dev to QA changes
    1.SLD: are there any changes we need to do.
    If you have common SLD, then I doubt if you may need any changes on SLD side.
    The Business systems you had used will be the same you may use in Q-Landscape.
    2.IR: are there any changes we need to do.
    ---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
    3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
    do.I am confused here.
    You need to reconfigure all communication channels, if SLD changes are OK then business system will
      change automatically and in communication channel just filled in correct IP/password etc.
    ---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
    Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
    4.RWB: such as alerts,and if there are any...
    --> The Alerts will not be transported....you need to create it as new setup for every box.
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

  • Transporting Objects from Development to Quality

    Hello Friends,
    I am working on a project where I have created Cubes, InfoObjects, DTP, Transformations and Open Hub Destinations in a Development Client.
    Now It's time to transport all these objects in to Q-Client.
    Can any one let me know the steps to do so? This is really very urgent.
    Your help is greatly appriciated.
    Thanks in advance,
    Kavita

    Hi
    Before transporting your complete data model
    Transport all the required info objects and its attributes First.(If you do not tranport the info objects first then when you transport the infosource the import will be failed saying that inactive info objcts found)
    Then replicate the required datasources in the target system. (If you do not replicate before transporting the request into the target system then it will give an error log saying that Fields does not exist in the dataosurce XXXX)
    So do the above two steps first and then proceed
    Then you can collect all the objects , Cube , Infosource, ODS, Open hub etc and transport it.
    You can transport from SE01 or SE09
    Go to SE01
    Select Modiafiable and display.
    Release the task of the corresponding request first and then the Request
    Go to STMS and then select your target system and import the transport request.
    Regards
    M.A
    Edited by: M.A on Jun 19, 2008 10:05 PM

  • Transporting content from development to quality

    Hi,
           What is the steps involved in transporting the EP content from EP development system to quality as well as production system.
    Thanks,
    Kundan

    Please try searching before posting. There are all sorts of good information about transporting in SDN and help.sap.com.

  • Problem while transporting query from development  to quality

    Hi ,
    At the time of collecting objects, we are getting an error.
    Object '48NYONN6RPXN7Q9YDS6DWSM35' (ROUT) of type 'Routine' is not available in version 'A'
    (Infact similar error statements round 16 are displayed).
    I don't see any object as such.
    i don't understand what the problem is? pls help.
    Rgds,
    Raghu

    Hi
    Go to table RSZCOMPDIR and enter this in the comp id
    48NYONN6RPXN7Q9YDS6DWSM35
    it will give you the technical name of the variable or the report .
    if it is variable transport the variable first and then transport the report.
    This will solve your problem.
    Reggards
    RaM

  • Problem transporting Request from Development to Quality Assurance Server

    Hi All,
    I m facing a problem of Transporting requests from one System to other.
    When adjusting the Request ,the error message reads as follows :
    <b>RFC system error in system/destination
    [email protected]_HSE</b>
    Now,when I check the RFC Connection for <b>[email protected]_HSE</b>,,
    i get the message :
    <b>" License Check required "</b>
    Please respond to this query urgently.....
    Thanks in advance

    Hi!
    I think it's better to call SAP support, if you have problems with the licenses...
    Maybe your company forget to pay their fees since a while
    Regards
    Tamá

  • If I trasport a object from Development to Quality

    Dear One's,
    I have query, If I trasport a R/3 source system object in BW from Development to Quality and then to Production. How this will reflects in Dev., Qty & Prod. of R/3 source systems?
    Thanks in advance,
    Raj

    Hi Rajasekhar,
                           when you are talking of the source system dependent objects it should be a datasource.
    Data Source should be transported first in r3 and then in transports starts in BW.
    When you are talking about BW transports which are not dependent on souce system there is no need to collect the source system while transporting.
    When the object is transported to Quality or from quality to production the source system mapping should be accordingly changed to R3 quality and R3 production.
    For this to haapen you should maintain an assignment in Rsa1.
    go to rsa1> tools> conversion of logical system names.
    go to new entries--> enter your r3 development server logical system name and in next column enter r3 quality system logical name.
    Save the assignment.
    Hope this is helps.
    Please correct me if Iam wrong.
    Regards
    Mahesh

  • Transport the created Storage Bin Automatic from develop to quality LS10

    Hello,
    My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
    He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
    The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
    There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
    Cheers,
    Marta

    I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
    Thank you very much.

  • Hierarchy transport from developement to Quality?

    Dear SDN,
    Hierarchy transport from developement to Quality.
    I have created one balance sheet Hierarchy on 0Account infoobject.
    Could you please tell me how to transport hierarchy from development to Quality.
    Waiting for response.
    Thanks & Regards,
    Kiran

    Hi Kiran,
    Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
    since you have done manulally you can do the same in other  systems also, but you need authrizations to maintain manually
    I have manually created my balance sheet hierarchy using RSH1 transaction code.
    you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
    check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
    Regards
    Daya Sagar

  • How to transport an LSMW object from dev to Quality and to Production?

    hi All,
             Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
    Thanks in Advance.
    Regards.
    Abhilash.

    Hi,
    The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
    This will transport the entire project though, not possible to transport a single object this way.
    step by step
    1. Run Tcode LSMW in source system.
    2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
    3. Now login to destination system. again execute LSMW.
    4. Now goto Extras-->Import.Give your file which was downloaded earlier.
    5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
    6. Now execute all steps.
    Also refer the below link
    http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
    Please reward points if it helps
    Thanks
    Vikranth

  • Transporting data from Dev to quality  using CMS

    hi....Fri's
    i am transporting data from development to quality, igetting this error
    Workspace was not defined for software component version PROC_SA_PROJECT , 1.0 of unilever.com Assign the software component version in the Landscape Configurator of the Change Management Service to a track..
    who will define the workspace for the SWCV, how can i rectify this error.....
    thanks in advance
    Pasi.

    hi pasi,
    just got to the link
    http://host:port/devinf/main.
    it will ask for cms user,get the details from basis.
    afte login go to LANDSCAPE CONFIGURATOR
    there select IR.REP and configure respective
    consolidation,production .
    please eneter in consolidation field  " http://<quality host><port>/rep
    and production field as "http://<production host><port>/rep
    now select IR.DIR and configure similar to IR.REP and replace rep with dir
    give consoldated system(QUALITY system) http://<quality host><port>/dir
    and and production field as "http://<production host><port>/dir
    now cms is done with configuring part
    now add the software component which u want to export .
    Thanks & Regards,
    Rama Krishna

  • Transporting Change document Object from development to quality

    Hi All,
    I have created a change document object from SCDO for my custom table. Now I want to transport this object from development server to quality server.
    As while creating Objects some enteries are made into standard table CDHDR and CDPOS which is client dependant so how to work this object on another client.
    Do I need to create seperate objects on quality server and then on production server?
    Thanks

    Hi Kiran,
    use transport connection to collect the objects to request, rsa1->transprot connection.
    use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
    in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
    after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
    remember to assign source system, click yellow box with X icon and mark the source system.
    after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
    take a look transport docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Re: Transport Organizer---
    transport query (bex objects)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    hope this helps.
    (Courtesy AHP from Re: transport)
    Bye
    Dinesh

Maybe you are looking for