Transporting InfoType Table change to Production

Hi,
I had added a field in structure CI_P0008 which is a structure to add custom fields to IT 0008.
I then adjusted the table (PA0008) thru se14.
Is it necessary to perform any other activity before sending the structure to Production?
The PS table has another Standard Structure PS0008.
Please advice.

Check if the table PA0008 is displaying the values for that field when u r entering any value from PA30 and saving the infotype...
Check if there r any validations need to be done on this field. If there r any validatiosn required, u need to make changes in program MP000800.
Rest, be assured to transport the changes to production.
Tahnks,
Shakir

Similar Messages

  • Reversing changes from production !

    Dear Friends,
    I have done a successful transport of java change to production system using CMS.
    Can I revert it back?
    Can I revert it back to previous of previous?
    If possible, how can I do it?
    Documents and links prefered.
    Thanks in advance,
    Regards,
    Lakshmikantha

    Click on the History button, select time frame of the last correct import. Pickup the "previous" change and add it to the import queue (+ button on the right hand top corner). It will be in your import queue and you can re-import again. You have to make sure you to select all the components in the same build.
    -RK

  • Transporting table changes

    Hi folks,
    I've made changes to a custom table in SE11(including keys and add new fields). Question is, if these changes are being transported to QA system, will the current table in QA system will be overwritten? how about the current content of table? will it be overwritten as well? do we need to adjust the table again in QA?
    Thanks,
    Tremonti

    Hello Karchy,
    You will not loose the data in your QA table once you move the Table changes. The conversion will be managed through a temporary table at the back end. You can expect a few dumps in your QA system while the transport is being imported, if there are programs accessing this table during that time. Basically the DB system will use one of ALTER TABLE or table conversion methodology to adjust your table (as you have data in it). Only if the table is empty, its dropped and re-created (fastest method).
    Once the transport is imported, its better to confirm the status of the table in SE14. If required "Activate and Adjust" the table and look out for issues in the logs.
    When you move this table to the productive environment, do so in a quite time (when the system is least active).
    Regards,
    Jinesh.

  • TRANSPORT Z-TABLE TO PRODUCTION SERVER.

    HI,
    I'VE CREATED ONE Z-TABLE,EVEN THOUGH THE Z-TABLE CONTAIN NO DATA ,WHEN I'M TRANSPORTING THIS Z-TABLE FROM DEVELOPMENT SERVER TO PRODUCTION SERVER IT IS GIVING THE ERROR
    KAY MESSAGE TABLE ZPF_DETAIL 2002007011004
    ENTER NUMERIC VALUES ONLY
    HERE 200-DATA OF MANDT FIELD
              2007-YEAR
              01-MONTH
             1004-PERNR
    WHICH I'VE ENTERED PREVIOUSLY,BUT NOW THIS TABLE CONTAIN NO DATA.
    PLEASE SUGGEST ME WHAT TO DO TO TRANSPORT THE TABLE TO PRODUCTION SERVER.
    PLEASE HELP ME,IT'S URGENT.
    THANKS
    SUJATA
    Edited by: Sujata Swain on May 8, 2008 6:53 AM

    Hi,
    After creating the table first activate the table
    Check whether  Delivery and maintenace
    and  Technical attribute tabs are maintained.
    Once that is done transport that request to production.
    To maintain the table in production you will have to create a maintenance view for the same

  • Transport Table K9RPEF1000006  from Production Server to Quality Server

    Dear Friends,
         I am performing client export/import activity and I have exported the Production Client with SAP Profile SAP_CUSX but when we checked log then It shows the table K9RPEF1000006 is available on production server but not available in quality server.So I have two queries ,( i) how can we create tranport request for this sap standard table (ii) How can we transport/move table from production client to quality client.
    Regards,
    Adya

    Hi Adya,
    You will need to create a transport manually using SE03 or SE09 ...
    R3TR TABL will transport technical settings for the table.
    R3TR TABU will transport table contents.
    Best regards,
    Derrick Hurley
    Development Workbench

  • PPOMW - changes in production not allowed

    Hi,
    We would like to assign a cic-profil to a user in transaction PPOMW in production environment. After saving the changes the error messages u201Cmandant 100 changes not allowedu201D occurs.
    Our consultants told us, that we have to change to status of the production environment in SCC4 before changing profiles in PPOMW.
    In my opinion this solution is not useful.
    Is there another solution or workaround ?
    Kind regards,
    Andreas Ament

    Hi
    Did you have access previously?
    It is likely that the problem comes from the automatic transport connection configuration in your productive system. You have more information on this regard in notes 208746, 163897 and 33582.
      Please check the following switches in table T77S0:
      TRSP ADMIN       (Deactivate automatic transport in infotype 0001)
      TRSP CORR        (Transport Switch (X = No Transport))
    Please check the result with both switches set to 'X' (= no transport). After this change you should not be getting any error message when saving.
    Regarding this parameter change in T77S0 view, please take into account that you have two possibilities: you might want to change this in all the systems, or you might want instead to change these values just in the productive system.
    a) For the first option it will be enough to set these "X" in the development system and then transport the corresponding request
       with this change to the quality and production systems.
    b) For the second option, you can allow changes in T77S0 view in the productive and pre-productive system, so you can mantain a different value there compared to development and quality.
          1- enter SOBJ transaction
          2- search T77S0 object
          3- double click on it
          4- activate the current settings flag
    Regards,
    Eddie

  • Logging of table changes

    Hi All,
              We are working on ERP 6.0. Recently Basis team has been asked to activate the table changes logs in Production system. Accordingly we activated the rec/client parameter for Production system client. We are also required to click the log changes tab in the table for which the logs are to be activated.This is to be done through t code SE13. While trying to do so, I have found that our Production system is not allowing to make changes directly as it is configured in non modifiable stage. I have also tried to make changes in devp clinet and then transport it to quality an Production,however it is not working.
    Kindly let me know the exact method by which I can activate the tab in the table.
    Thanks,
    Prasad Thakur

    Hello Prasad,
    This is strange. It is understandable that the table content changes is not getting recorded in case rec/client (in default profile) is not set along with recclient="XXX" (in transport profile) but  table logging activation not getting reflected in QA is a bit weird.
    Are you sure that the transport carried correct contents. Can you list the contents of the transport. It should have an entry related to DD09L.
    Is the table showing as activated ? Just try to activate/generate it.
    For more info on recording please check OSS notes 1916 and 84052.
    With Regards.
    Ruchit Khushu.

  • Update customizing table on the production

    Hi all,
    Ik maked a customizing table on the development environment.
    Evert time i need to update the data of this table , then i have to do it on the development and then tranport it to the production via a transport request.
    Is it possible to change this (setting) table in the production, without using the transporting request ?
    I changed the properties of the table from C (Customizing)
    to A ( Application table), but it doenst help.
    Anyone have a suggestion ?
    Thanks,

    Goto Development system-> again change settings from C to A,use database utility ->activate and adjust database.
    now delete table maintaince and re create table maintaince,now transport your request to production,it should be fine now.
    Thanks
    Seshu

  • Table maintenance in production

    Hello Folks,
    We have setup SM30 access to users to update Z tables in production. How do we get them to update it without the need for a transport request in Production each time they maintain it?
    Is there some setting in SE06 that we need to setup for all custom tables?
    Thanks
    Prakash

    Hi Prakash,
    You will require to change the properties of Table Maintainance Generator:
    1) Go to SE11, Display table
    2) Click on "Utilities" -> "Table Maintainance Generator"
    3) For Recording Routine select 2nd radio button i.e. "no, or user, recording routine"
    and Activate the Maintainace.
    Now if you add the table entry it will not ask for transport. You have to move these changes to Production to take effect.
    Hope this answers your query.
    Regards
    Shital

  • How to copy changes to Productive client? URGENT!

    SAP has a note related to the payroll module which we had to apply to Client 000. We were able to use SCC1 to copy from Client 000 to Client 200 in our QA environment.
    However in Production we are unable to use the same method due to our SCC4 settings.
    SAP revert that we cannot use SCC1 in Production and that we should identify the changes and tie to table changes to a transport request and transport to Production.
    Can anybody please advise what is the best way to copy the changes to Productive client?
    Thank you.

    Hi,
    If that Org is with in the Parent Org unit, you can do.
    Good Luck
    Om.
    <b>Reward</b> ponts are always appreciated.

  • APO Bapi - ERROR - No entry found in transportation indicator table for fol

    Hi
    Experts .. need help on a APO bapi
    Iam being doing BAPI for transportation lane to add new material through the bapi BAPI_TRLSRVAPS_SAVEMULTI
    iam passing  the following to BAPI
        Logical system
        model
    and in tables .
        TRANSPORT_LANE
        TRANSPORT_LANEX
        PROD_PROCUREMENT
        PROD_PROCUREMENTX
        LOCATION_FROM    = '1010'.
        LOCTYPE_LOC_FROM = '1001'.   
        LOCATION_TO =   '1101'.
        LOCTYPE_LOC_TO =  '1001'.
    the above data is common for passing all the four bapi tables and in
    addition iam passing
    prod-valfr =  Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
    prod-valto =  Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
    prod-product = material number.
    AFter excuteing bapi iam getting an error
    No entry found in transportation indicator table for following objects
    the above error occured when passed the given data to bapi table -  PROD_PROCUREMENT  
    if we pass the data to   PROD_PROCUREMENT and   PROD_PROCUREMENTX
    then there is no error in  table return of bapi but the data is not uploaded in transportation lane.
    I will really appreciate if some guide me where iam wrong or some other solution for this .
    Regards .
    Thanks .

    Hi,
    I am writing bdc code for uploading changing inspection plan data using qp02 . I saw your post in sdn .I think you have solution .can you tell the solution .
    Regards
    Nandan.

  • RC8 while transporting a Table

    Hello Expert,
           I am facing an issue. In a custom table I change the search help of fields and transport the same. While transporting the table I am having RC8 and table is partially active to destination server. I know we can use FM DDIF_TABL_ACTIVATE to resolve such type of issue but I want to know why we are facing such type of problem.
    Error message. 
    Custom table Name: ZCS_FSETBO_ARCH1
    Activate dependent view /1SAP1/CNV_B2559
    Field ZCS_FSETBO_ARCH1-ROWID does not exist
    Key field ZCS_FSETBO_ARCH1-AUTYP missing. Specify maintenance status 'read only'.
    Key field ZCS_FSETBO_ARCH1-PERNR missing. Specify maintenance status 'read only'.
    Key field ZCS_FSETBO_ARCH1-VORNR missing. Specify maintenance status 'read only'.
    Key field ZCS_FSETBO_ARCH1-ZSPMON missing. Specify maintenance status 'read only'.
    Key field ZCS_FSETBO_ARCH1-Z_OBJID_STR missing. Specify maintenance status 'read only'.
    View /1SAP1/CNV_B2559 was not activated
    Please help me.
    Regards
    Swati

    Hello Expert,
        To my understanding we do use se14 when there is some change in fields type(lenght increase/decrease) or add or remove any fields.
    In this case also se14 required.Can you please confirm me that.
    Regards
    Swati.

  • Transport FG from Quality to Production

    Dear All,
    I have created couple of function group and transported to Quality system. Now as per the requirement I have made the changes in different FM of these FG as well as includes. So there are few versions in DEV system.
    Now finally i want to transport the these FG to production system. So which transport request I have to use to move to the production?? In Quality it showing different request for each FM and include (Latest version request number).
    Can anybody tell me how I can transport my all FG to the production via Quality??
    Is it good way to create one more request for all FG using SE03 tcode, so that all FM with includes i have final request in DEV system which I can move to Production via Quality....
    Good suggesstion are most welcome.....
    Thanks in stack......

    Hello Nilesh
    This is quite a common problem with function groups.
    However, if you have at least one system where the entire function group is complete (i.e. contains all function modules and the TOP include contains all data definitions and the frame program all additional includes) then you can go to the workbench (SE80). Right-click on your function group and choose "Other functions" -> "Write transport request entry". The CTS puts the function group into the transport request which should then be transported entirely.
    I highly recommend first to "synchronize" your DEV with your Quality system, repeat the tests there and, if everything was successful, transport to Production.
    Regards
       Uwe

  • IDoc creation on save and change of production order

    I am looking for a way to create, and send if possible (if not I'll send with a batch job), on the save (creation and change) of production orders.  This will be a modified LOIPRO iDoc.  Currently we have a customer exit on the save of the production order but because it is before the save we must predict the number of the prod order.  This has worked but now we are creating one production order per line item in a sales order (automatically) so this is causing us to predict the same production order number twice.  We need a way to automatically create and send an iDoc for all production orders for given plants.  Right now the solution we are looking at is creating an output type and running through those output types a few times a day, sending them down to the Shop Floor system (proprietary system). 
    Is there anything setup in SAP that we can utilize?
    Regards,
    Davis

    Hi Rick,
    Follow the below sample steps for changing component quantity:
    DATA:
        l_methods TYPE bapi_alm_order_method,
        it_boperations TYPE STANDARD TABLE OF  bapi_alm_order_operation_e WITH HEADER LINE,
        it_components TYPE STANDARD TABLE OF bapi_alm_order_component_e WITH HEADER LINE,
        it_components1 TYPE STANDARD TABLE OF bapi_alm_order_component WITH HEADER LINE.
    1. Call BAPI :BAPI_ALM_ORDER_GET_DETAIL , it will give existing order component details.
    CALL FUNCTION 'BAPI_ALM_ORDER_GET_DETAIL'
        EXPORTING
          number        = <production order number>
        TABLES
          et_operations = it_boperations
          et_components = it_components
          return        = it_bapiret2.
    2. Move it_components to components table compatibel to BAPI "BAPI_ALM_ORDER_MAINTAIN".
    LOOP AT it_components.
    MOVE-CORRESPONDING it_components TO it_components1.
    _*"Note here while moving change the component quantity"*_
    APPEND it_components1.
    CLEAR it_components1.
    ENDLOOP.
    3. Build the methods table for change production order :
    it_methods-refnumber = v_refnumber.
                it_methods-objecttype = 'COMPONENT'.
                it_methods-method = 'CHANGE'.
                it_methods-objectkey = v_objectkey.
                APPEND it_methods.
    "Note v_refnumber has 1 to 1 relation ship with the components table, if you want to change First component in it_components1 then you have to enter value '1' here for v_refnumber.
    it_methods-method = 'SAVE'.
            APPEND it_methods.
    4 . Call
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
              TABLES
                it_methods   = it_methods
                it_component = it_components1
                return       = it_bapiret2.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

  • How track changes in production order which is already Read PP master data

    Hi Gurus,
    Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
    We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it.  That It could not be able to distinguish to which order READ PP MASTER DATA done.
    So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
    Any table which can track the changes once the order been through with READ PP MASTER DATA?
    As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
    Hope to get a reply soon.
    Regards,
    Sap User

    Hi,
    A suggestion:
    Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
    Revert if you face any issues.
    Regards,
    Vivek

Maybe you are looking for