Transporting Integration Directory objects between N and N+1 landscapes

I have a question regarding the transport of Integration Directory objects.
We are implementing N+1 PI 7.3 (java only) Development and QA systems. The N+1 PI systems are a copy of the Production Support (N) PI Development and QA systems. As part of the N+1 build we will also configure the business systems in the SLD for this landscape. Is it possible to transport objects from the "N" landscape into the "N+1" landscape? These changes would only be new objects that would not overwrite anything in N+1. For anything that is also being changed in N+1 we would perform manually. Is there anything special needed when setting up the business system in the SLD for this scenario?
Thanks!

Thanks Barry
That menu option is available to me too but there is no option to use CTS+ in the pull down list.
I can't visit imageshack from work so I can't see your screenshot but I'd bet you have the option to export using "Open CTS+ Organizer" on the first menu too - I don't.
I've obviously got some config missing but, given I can transport ESR and SLD objects, I'm struggling to know what.
Edited by: Murray Nicholas on Sep 3, 2010 12:39 PM

Similar Messages

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

Unable to activate PI - Integration Directory Objects

Hi Guys,
i am unable to activate PI - Integration Directory Objects.
when i'm trying to activate its taking too much time,then no response.
can any one pls help me on how to resolve this issue.
Thanks,
Siva.

Hi Siva,
Check with your basis guys.
In most cases, this is due to memory overflow error. They should free the memory which some interface or logs is holding up.
Most of these problems are solved by simply restart of the server.
I strongly suspect that some log file might be growing which would have consumed all memory.
Regards
Krish.

Serialize the object between Server and Client?

Hello friends,
What is the important to Serialize the object between server and client?
Thanks
tamilvanan

in which context ??
Anyways,checkout the below link and try to understand how do we convert Serializable Object's State to in Stream and send it over network.
http://java.sun.com/j2se/1.4.2/docs/guide/serialization/examples/index.html
Hope that might help :)
REGARDS,
RaHuL

(UIX XML) Sharing Connection objects between BC4J and custom java.

If I have a UIX XML page that contains some BC4J application modules, then in the event handler I call [public static EventResult handleMyEventEvent (BajaContext context, Page page, PageEvent event..) ], which in turn calls some java classes I have written that take a java.sql.Connection object and access the database doing some updates/inserts with this Connection object (via JDBC)....HOW CAN I USE THE SAME TRANSACTION AS WAS USED IN THE BC4J APPLICATION MODULE...i.e. CAN I SHARE THE CONNECTION OBJECT BETWEEN BC4J AND MY OWN JAVA CLASSES THAT USE JDBC?
What are the best ways to share such a transaction?
Thanks,
Paul.

Would it be easier to use a custom method on the bc4j Application module?
Take this scenario...
1. User opens UIX XML web page which opens a bc4j App Module..it has a VO based on all employees.
2. User presses the add button and a new employee is created (using the bc4j App Module).
(Notice: no commit yet!)
3. User presses the submit button...fires event REVIEW_SALARY.
4. This event is 'handled' in the event section of the UML XML...it calls:-
public static EventResult handleREVIEW_SALARYEvent (BajaContext context, Page page, PageEvent event)...
5. I now want to call a java class I wrote that computes an employees new salary and updates the employee record with this new salary. This update will fail unless it is part of the same transaction as the one used by the bc4j App Module (that inserted the new employee).
How best to proceed from here?
How about having a method on the bc4j App Mod's VO called 'reviewSalary'? Calling this would use the same transaction? I could then call my java class from within the VO's method? However do I still have the same problem in that my java class expects to be passed the connection object?
The approach you suggested previously seems a touch dangerous....in that these are not 'publically exposed'...and a new release of JDev may break my code.
Thanks,
Paul.

Integration Directory Objects Transport Using the File System

Hi
I am trying to do the IR and ID Objects Transport Using the File system... I am able to Transport the IR Objects and IMport in to QA ... but when i try to Import ID objects its giving me the error...bcoz all the ID objects pointing to theSAP R/3 DEV system ( Interface Detremination, receiver determination ...)... do i have to config something in SLD ..so when i import the ID objects in to QA system it points to correct SAP R/3 QAS system...
and we are using single SLD for all the DEV , QAS and PRD system
SV
Edited by: S V on Oct 15, 2008 4:08 AM

Hi,
You will have to configure transport targets like for different business systems in your dev environment, there shouls be corresponding Business systems in QUA environment. For more details refer the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Thanks!

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

IDOC Sender Partner has changed after transporting Integration Directory ob

Greetings,
After we did a transport from QA to PR for a new interface (Intergration Directory) objects were transported,
The sender partner has changed to QA in all outbound IDOCs generated in XI PR.
I checked the adapter-specific identifiers and it is showing as production.
Any hint where I should check?

Found it in the filesystem communication channel as QA and changed it to PR

Problem restricting Integration Directory object access

Hi All,
We are trying to restrict access to a group of objects in the Integration directory. In the tab "Party" i select the option as follows:
Selection Paths -
Operator - Include, Party - Service without party, Service - BSR_TEST
Objects -
Operator - Include , Type = *, Action - Change
However, this role when assigned to the user allows create and delete option as well. Also, if any other role is assigned to the user and then revoked, the restriction does not work (the role mentioned above gives an Insufficient authorization error even for the objects it is set to permit)
Our XI system version is 7.0 with SP level 17.
Thanks in advance for your inputs
Vijaya

Hi Abhishek,
Thanks again for your response. However any ideas as to why the role would stop working f user settings are changed?
Also, when i select the service using option - single selection and select multiple checkboxes (even 2) it does not work, where as if i add 2 rows with one value it is ok.
Let me know if i am missing something
Thanks
Vijaya

Can any please explain the integration business process between PS and CS

Dear Guru's
Can any please explain the integration business process between Project systems (PS) and customer service (CS).
Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
How we map this Business scenario in sap.
Regards,
Bhanu

basic steps for such a process would be
1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty

CMS transport Integration directory failure.

Hi All,
I have successfully transported IR objects to quality But couldn't ID objects using CMS. Is there any thing needs to change
when I am transporting ID objects to quality from delivery . do we need to create seperate ID objects in development and transport
to quality ?
Please let me know what needs to be create/change of ID items when moving from DEV to Quality . I never transport before.
Thanks,
Vinay.

HI,
there are some preconditions need you check before your transport your request which include your id object to your qas system.
1.your system TS/BS must exist in your Q sld.
2.you should ensure there is not any active changelist in your q system's ID.
actually you could find detail error in your tranport log.you could correct the error which is described in transport log.

Integrating Workplan structure between OP and P6

Hi All/Dean,
While integrating the workplan structure between OP and P6 using PIP, the entire WBS structure of OP is sent to P6 and the further addition of WBS/activities and resource assignment in P6 are sent back to OP back.
Here the question is whats the use of integrating the numerous WBS/activties created on P6 to be seen back in OP? The OP WBS structure will become bulky if we create more activities (1000s of activities) in Primavera for planning, scheduling and resource assignment and integrates the workplan strcuture to OP.
Is there any way to integrate only few WBS or activities instead of sending the bulky WBS to OP in Workplan integration?
Thanks

Hi, sorry for the late reply, I somehow missed seeing this post and had some vacation recently.
I think you are aware that you can select to roll up your WBS from P6 if you integrate with the financial structure only, and yes, it's unfortunate but we do not allow that to happen with the workplan integration.
Part of the reason this was done is that we built the integration based on best practices we found out from customers who have built their own integrations. For most of them, they planned to actively manage their project schedules in P6 and only worried about collecting cost in EBS and therefore planned to integrate only with the Financial structure at a very summarized level. Some other customers (but definitely fewer) would want the full WBS in EBS and P6. This was most common for customers without large WBS. If someone wants to actively use a workplan on a project then it makes sense they would want to see all of the activities in both application's WBS.
The major thing you lose if you do integration to the financial structure is that we don't send percent complete like we do to the workplan structure. For some customers this isn't an issue since they are fine with reporting % complete out of P6, for others they want to see it along with the costs in EBS. We do have this down as an enhancement request though for the future.
I hope this has clarified the situation for you.
Regards,
Dean

ABAP Table for Integration Directory Objects

Hi
Is there any ABAP table, which stores the runtime objects, communication channel, It's status, Service etc.
Where you can find out status of each channel and the channel type used within the ABAP stack in Data Dictionary table.
Replies apprecriated.
Swetank

Hi Paresh,
To view the status of adapters you can use RWB.
You dont need to write an ABAP report for this purpose.
RWB->Component Monitoring->Click on Displaye with status "all".
Then..click o Integration Server->Adapter Engine
click on 'Adapter monitoring' in the the 'Status' tab page of the window at the bottom of the screen.
This will launch a widow with status details of all the monitors.
Hope this info helps you.
praveen

Pass Object Between Applet and JSP Page

Hi all,
How can I pass an Object(such as Vector, File), rather than just string to the Applet from a JSP page?
Thank you.

I used Base64Encoder and Base64Decoder from servlets.com utilities.
* convert any serializable object to a String
public synchronized static String objectToString(Serializable obj) throws Exception {
    ByteArrayOutputStream bos = new ByteArrayOutputStream(100);
    ObjectOutputStream oos = new ObjectOutputStream(bos);
    oos.writeObject(obj);
    byte[]bytes = bos.toByteArray();
    bos = new ByteArrayOutputStream(); //to save the encoded String
    Base64Encoder enc = new Base64Encoder(bos);
    enc.write(bytes);
    String encodedString = bos.toString();
    //close all
    enc.close();
    oos.close();
    bos.close();
    return encodedString;
* Recreates the object from the encoded String
public synchronized static Object stringToObject(String str) throws Exception {
    ByteArrayInputStream bis = new ByteArrayInputStream(str.getBytes());
    Base64Decoder dec = new Base64Decoder(bis);
    ObjectInputStream ois = new ObjectInputStream(dec);
    Object obj = (Object)ois.readObject();
    ois.close();
    dec.close();
    bis.close();
    return obj;
}

Transporting Integration Directory objects between N and N+1 landscapes

Similar Messages

Maybe you are looking for