Transporting KM Content from 7.0 to 7.3

Is it possible to transport KM content from 7.0 to 7.3? I can export the content from 7.0 just fine, and then upload the transport in 7.3 just fine. But when I select the transport in "Pending Imports" and choose "Start Import", the import fails every time. The only info I can find in the import log is "Error Import "EPD_CONTENT" (d00ec46a-66bc-2e10-e1ab-8330d94df02e) failed with 1 errors after 0 minute(s) 0 second(s)".
Any idea why, or if there is some trick to this transport?
Thanks,
Owen

What is your server setup for the portal?
I have a new portal install of 7.3 on a different server than my 7.0 portal. Usually, when I transport KM content from EPD 7.0 to EPP 7.0, it automatically saves the transport on the K drive. I then download the transport onto my S drive manually. When I import the transport into EPP 7.0, I upload the transport from the client machine (my S drive) and everything works fine.
When I do the same thing for creating the transport package, and then upload the transport into EPD 7.3, it works fine also. Then when I try to actually import the transport, it gives me an error. The logs say the following:
Sep 29, 2011 11:30:49 AM    Info    Starting import "ZEX_SPS_REPOSITORY" (f055d3b8-cdcc-2e10-0ba4-d618f8fd400a) using mode "MergeFolder" (ConstantID=false)
Sep 29, 2011 11:30:49 AM    Info    Importing from "K:\usr\sap\EPD\SYS\global\config\cm\expimp\import_work\f055d3b8-cdcc-2e10-0ba4-d618f8fd400a"
Sep 29, 2011 11:30:49 AM    Error    Import "ZEX_SPS_REPOSITORY" (f055d3b8-cdcc-2e10-0ba4-d618f8fd400a) failed with 1 errors after 0 minute(s) 0 second(s)
Sep 29, 2011 11:30:49 AM    Info    Statistics: 199 items (16 folders, 183 files, 0 links), 14257152 bytes in total
The only thing that looks curious in that log (besides the fact that there is an error) is that it says it is importing from the K drive. That's not where I uploaded the transport from, I uploaded it from my S drive. Does it always say that?
Any other ideas?
Thanks,
Owen

Similar Messages

How to Transport VC Content from NetWeaver 7.0 to NetWeaver 7.4

Hi
I am following the wiki:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c084eeac-b97a-2c10-e8b0-a27b5608b5d2?overridelayout=true
http://wiki.scn.sap.com/wiki/display/BOBJ/BI4+-+NW+Java+WAS+7.3+EP+and+BI4+portal+applications?original_fqdn=wiki.sdn.sap.com
However I have a problem with the process of Import PAR .
When I Open Archive Uploader: http://<server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.system.console.ArchiveUploader
the system genera the following message of error:
Portal runtime error
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID 11:52_20/08/14_0002_6250450
See log file for details about this exception
This is the log generate in nwa
11:52_20/08/14_0002_6250450
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Could not create a context for: com.sap.portal.runtime.system.console.ArchiveUploader
at com.sap.portal.prt.component.PortalComponentContextFactory.createPortalComponentContext(PortalComponentContextFactory.java:182)
at com.sap.portal.prt.component.PortalComponentContextFactory.getPortalComponentContext(PortalComponentContextFactory.java:82)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:442)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:202)
at com.sap.portal.prt.dispatcher.DispatcherServlet.service(DispatcherServlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.portal.prt.dispatcher.CustomHeaderFilter.doFilter(CustomHeaderFilter.java:58)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:432)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Thanks
Regards

Hi,
Assuming we are talking on Par applications (not content),
You should use "SystemAdministration" -> "Support" -> "PAR Migration Tool" to convert PAR files to 7.30 deployable EAR files.
Then you should deploy them on the system by using any
eligible method such as NWDS or SUM tool.
Best regards,
Etay

Transport XI System Landscape Directory Contents from Production to Quality

Hi
I want to transport SLD contents from my production environment to the quality environment.
I could see a link in of export in the SLD Administration page, will that help me. I think that link will allow me to transfer whole contents however I want to transfer only the non production systems from SLD.
Is it possible, if yes then please tell the steps.
Thanks

Hi,
I want to transport SLD contents from my production environment to the quality environment
Did you see this weblog,
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Also there are other using file transport,
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
This will get you an overview.
Hope this helps.
You can also Use CMS for transport.
Regards,
Anirban.

Transport of activity from Quality to production for webDynpro Java applica

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.
Hi Vijayalaxmi,
Following are the steps for transporting the content from DEV to QA
1. Check in the activity into DTR and activate it. Once it is activated successfully it will show green
2. Now go to transport view and release the activity by drilling down in waiting... node.
3. Once the activity is released it becomes available in the Consolidation tab of CMS.
4. Import the activity in consolidation tab
5. Assemble the components in the Assembly tab.
Once you assemble an .SCA file is created in \usr\<SID>\trans\CMS
6. Copy this file manually and deploy it using SDM in QA.
Hope it clears your doubts
Best Regards,
Ravi

Problem in transporting WPC Content

Hi,
I am facing problem in transporting WPC Content from server1 to server2. After transport the webpages are not displaying the contents. Webpages are showing empty layouts. I have done the layout configurations. Webpages are cotaining iViews and Html contents from KM . The webpages are not allowing to edit. Its very urgent.Help me to get through this.
Regards,
Mallini.V

Hi MaliniV,
Before you transfer the WPC content from one server to another, you need to be very careful about the settings and configurations. Did deply the WPC on the other server ? Did u do any custom page layouts in development server ? if yes, you need to do the same in production server as well. if not , it won't work.
I too had the same problem before. but ! after checking all these , I corrected them.
I hope this will help u.
Thanks
Suresh

Transporting content from development to quality

Hi,
What is the steps involved in transporting the EP content from EP development system to quality as well as production system.
Thanks,
Kundan

Please try searching before posting. There are all sorts of good information about transporting in SDN and help.sap.com.

How to transport content from a NWDI to a nes NWDI

Hi
I have an old installation on a server with bad responses and have installed and configured a new NWDI on another server.
I need to export the development component from the old one to the new one.
Hov to export content from NWDI?
Regards
Kay-Arne

Hi,
I would try this way....
--> Create new track, setup new buildspace, workspace on the CBS/DTR of the new NWDI server.
And then for content copy..
--> Download the asembled SCAs from the old NWDI server and check it in in my new track OR
--> sync the content from old NWDI server to the local filesystem and then upload/add it to the new track with the help of NWDS as described here:
http://help.sap.com/saphelp_nw04/helpdata/en/58/bce81866d9984096350cae0d6753c3/frameset.htm (Basic operations in DTR)
Akshatha

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

Error while transporting migrated contents

Dear SDN,
I had a requirement to transport the contents of Migrated Folder in Portal. I guess these contents have been migrated from EP5 to EP6. The contents in this folder are some standard SAP objects, i.e., iviews, pages, etc. The contents are working fine in our quality portal.
I had a standard SAP Page which had some standard SAP iviews attached to the page. The page as well as iviews were working fine in Quality. I transported the standard SAP Page and all the iviews folder to production, since iviews folders were not appearing in production. Now when I preview the page, page gets opened up properly but the iviews shows error on the page. The error displayed by the iviews is :
*Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:54_06/03/09_118801351
Refer to the log file for details about this exception.*
Regards,
Shreya

Hi shreya,
Any PCD content with ID starts with com.sap...... cannot be transportted from one system to other system.
You can do a work around.
You can change the ID from com sap to com.abc(any). Then you can transport them.
But don't change the id of standard ones. Only duplicated once (copy of standard ones) can be transported.
Hope that helps.
Raghu

Unable to create a customizing request to transport BPC10 content to Quality

Hi
Unable to create a customizing request to transport BPC10 content to Quality .
From the transport connections tab, i am selecting the required objects and then clicking the transport truck but it does not pop up and ask for a transport request .
So please provide any solution.

Hi,
Check whether Standard transport switched-on is enabled or not. To get transport request your setting should be as follows : RSA1-->Transport Connection-->Edit-->Transport
Hope it helps...
regards,
Raju

Transport data types from PI 7.1 to 7.0

Hi,
I need to create in PI .70 a datatype that contains 30 datatypes, these datatypes are created in other machine PI 7.1, It's possible transport this objects from PI 7.1 to 7.0?
How I can do it?
Thanks in advance
Jose Manuel

Export the data types from the IR in PI 7.0 and then import them into PI 7.1.
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
Regards,
Ravi

Access XML Content from Alert Category (ALRTCATDEF) ?

Hi PI Expert,
is that possible to access xml content from Alert Category (ALRTCATDEF) if the error occurs from Adapter engine.
For example IDOC number / PO Number, so i can put in into Subject email notification.
At the moment i am only know how to send dynamic data from ccBPM.
Please advise.
Thank You and Best Regards
Fernand.

Hai,
Yes the user existed in QA before I transported the category. (Since users are not transported, I simply created a user with the same name.) Also, I used the role SAP_XI_ADMINISTRATOR for the receivers via subscription and roles.
Thanks,
Filipe

Transport table contents

Hello experts
I am trying to transport the contents of a table from one system to another, using a request.
When I select all the table data in SE16 then and go to menu Table entry- Transport Entries. By default a prompt for customizing request pops up and even if a create a customizing request and try to proceed I get an error message u201CTask BWDK901759 belongs to a different categoryu201D
Any ideas plz
Thanks in advance

Hi,
sounds like there is something wrong with your transport system. Check with a basis guy. There have to be a different setting in the transport system or you can manually enter a different category to the request so that it will be valid for your purpose.
regards
Siggi

Migration of portal content from EP 6.0 SP 15 to NW 2004s Portal

Hi,
Our requirement here is to migrate Portal content from EP version 6.0 SP15 to the latest Netweaver portla (NW2004s). Expecting helpful suggestions from SAP EP gurus!!!
All helpful answers will be rewarded. Gurus, please help!!!
Cheers,
L Buegg.

Leena,
These are the steps in migrating the portal content from the EP 6 SP15 to the Netweaver Portal (EP 7.0 or the NW 2004s Portal) in simple:
1. Go to System Administration -> Transport -> Portal Content. Right click on the folder, you wish to transport. Select New -> Transport Package .
2. Fill all the details (like name of the transport package, id etc) and then add the objects(iViews, Pages etc) you wish to transport to the newly created transport package by right clicking on the objects.
3. Once the objects are all added, click on Export in the object editor of the Transport package and the export happens immediately.
4. Navigate to Drive\usr\SAP\SID_Instance\Sys\global\pcd\Export of the EP 6 SP 15 Portal Server. You will see the epa file created during this export process.
5. Copy this epa file and place it in Drive\usr\SAP\SID_Instance\Sys\global\pcd\Import folder structure of the NW 2004s Portal Server. Go to System Administration -> Transport -> Import and do the import as you would import any business package.
This are the steps to export and import the portal content from one portal server to another portal server.
Hope this helps!!!
Sunitha.

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Transporting KM Content from 7.0 to 7.3

Similar Messages

Maybe you are looking for