Transporting Metadata from not running system!!!

Hi all,
I have a serious problem to solve. Our main system stop working in the day of the presentation of a demo   The problem is that when we open the SAP Management Console and we try to start the system, the JSTART.EXE process hangs in the step "Synchronizing binaries".
This is a NetWeaver problem that I don't know how to solve it. I need to export/transport the metadata of the demo to another system, but without a running NetWeaver, I don't have access to the SSM Tools page in order to do that. My question is, how can a export that information in order to put in another system? It's possible to copy the MAXDB database file? What file should I copy (there is several MAXDB files in the harddisk).
System is running SSM7.5 SP6
Thanks in advance
Regards
Pedro Costa

Hi Vijay and Bob,
thanks both for your answer's. Sorry for the late reply, but at home I did not have my log on details...
Because of the urgency of the situation, last Friday we have to take the decision, of reverting the server the the last made backup, that did not have all the work we made for the demo. So it was a long weekend redoing everything. At least now it's done and the SSM/NetWeaver it's working again.
Going back to the problem, we are using MAX DB as our system database.
Vijay, where can I check that setting of the MAXDB cache?
This is not related with the NW license, we are not using a trial
PS: This is not the first time this happens. The first time we work with SAP Support, but after some days without real help, we us the "solution" of the backup again. At that time, they say the probem with was probably caused by a memory setting, but I change that as they suggest, and on last Friday it happens again...
Regards
Pedro

Similar Messages

  • Error when transporting Webservice from our DEV system to QA system

    Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service.  This was created in our 030 client of DEV.  I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice.  I then transported the webservice to our DEV 200 client and all worked well.  Next I transported both to our QA box, first the vi/Service transport then the webservice transport.  This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign.  Is there a trick to transporting this webservice to different systems?
    I def award points for helpful answers
    Cheers
    Devlin

    hi,
    I had this problem once and in my case the service wasn't activated in SICF.
    so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
    anton

  • Transport warning from EHP4 upgrade system to systen not at EHP4

    when we import CTS into production, we are getting warnings on missing table as below.  It is likely due to the EHP4 as this table is delivered only in Feb 2010. Note that our development system is on EHP4 and Production is not so that could be the cause of the issue. 
    Table UCUM04C is not in name tab
    No entries for UCUM04C will be imported in this step.
    Same for UCUM04C, UCUM04T, and UCUM060
    Please let me know if there are any resolution items for us to pursue..
    Regards
    Preeti

    Hello Preety,
    The Warnings in the import protocol refers to some personalization attributes in the roles regarding component FIN-SEM.
    There is no direct impact to the menu, the user assignments and the authorizations of the transported roles. If you do not need the personalization from the roles, you will not have any trouble. These warnings are absolutely harmless.
    Nevertheless I would suggest to retranspoort the roles as and when your quality and productive system was updated to the same version as your development system is. There is no other workaround to get rid of these warnings except getting all the systems to same versions.
    Regards,
    Nitin

  • How to Transport iViews from Portal Dev system to Prod system?

    Hello friends,
    This is an urgent request and it would be of great help if you can give me a solution to this.
    We have a Development Portal and a Production Portal. There is no QAS Portal. We are on EP 5.0 and BW is 3.5. Coming to my question, I have created an iView on a Web Application Designer template and assigned it to a role on the Development Portal. The report displays well on the Portal. Now I want to move this newly created iView to Production Portal. I absolutely have no idea how to do this as it is generally a Portal person's work and I have been asked to do this as the Portal person is currently on leave. I need to move the iView to Production as quickly as possible and I would really appreciate if any of you can send me detailed steps on how to do this.
    The best way to say thanks in SDN is to assign points to helpful answers and I will not forget that.
    Thanks,
    Deepthi.

    Hi Deepthi,
    observe these links:
    Here is some material:
    How to Transport Models Within SAP Analytics
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/035be5d4-0a01-0010-b48a-d4c8c9b020b5
    Actually, those pieces are also included in my book "SAP NetWeaver Visual Composer" which is already available from SAP-Press ( http://www.sap-press.com/product.cfm?account=&product=H1932 )
    If Usefull Asain the points.
    Thanks,
    kiran.
    Message was edited by:
            kiran manyam

  • Transporting Iviews from QA/DEV system to production system

    Hello All,
    I have some iviews that are based on BW report Iview (BEX ). I have them developed in the qa environment. How can I transport the same iview to the production server.
    The portal landscape is some thing like this.
    We have a devlopment and qa portal , these are accessing the DEV and QA bw systems respectively.
    Then we have a production portal server and a production BW server.
    Now we have developed some reports in BEX and those are published on the development portal using Web Application Designer.
    How can we trasport the same iviews to the production environment? or first of all is it possible to transport the same? We are on EP 5.0 Sp4 and BW 3.5
    Thanks in advance
    Pradeep Bhojak

    Bhojak,
    Yes it is possible to do it. Look at export option under System Admin menu. You can export everything as a package and import the same pakage into your Production system.
    Good Luck.
    GO.

  • Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
    for example downloaded all co files and data files
    control file: K900470.SAD and Data file: R900470.SAP from transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried to add in the import queues using TCODE: STMS and trying to import.
    During import we get the below error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
    End with rc : 16
    Please help me on this
    We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
    Thanks & Regards
    Murali Papana

    Did you see that you tried to transport to an older release!! You should have expected such a result.
    Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

  • Battery shows as having charge in System Profiler yet will not run from bat

    My MacBook is about a year and half old. My battery just started doing this a few days ago. It shows as not charging. Checking the battery shows that it has 85% power left (this was 86% the day it started). The magsafe connector stays green. The MacBook will not run without the power connected.
    I am not sure if this is an issue with the battery, the batteries connector, or with my MacBook. I'm pretty tight fro cash right now and need my MacBook working. I don't have money to throw at parts I don't need. If anyone has experienced this issue before and has any insight please let me know. I'm a starving web programmer and I need to be able to bring my MacBook with me to meet with clients.
    Thanks,
    Steven
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-3738-3b2a
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0102
    Charge Information:
    Charge remaining (mAh): 4211
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 4939
    Health Information:
    Cycle count: 232
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12158
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Do you think it is software. It will not even boot when the power is not connected. I was thinking it was a problems with ACPI in the EFI BIOS. The strange thing is just a moment ago the magsafe went orange and the power states calculating. This is the first time I've seen the magsafe orange since this started four days ago. I came back to this thread to update it with this little tidbit and saw your reply.
    This is my current power information from system profiler:
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-3738-3b2a
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0102
    Charge Information:
    Charge remaining (mAh): 4199
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4939
    Health Information:
    Cycle count: 232
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12148
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: Yes

  • How do I stop the dialog, "The Application "Transport Monitor" could not be launched because..." from appearing?

    The dialog appears exactly like this, "The application "Transport Monitor" could not be launched because of a shared library error: "h<__ct__16CTransportRelMacFP18OpaqueTransportRefUc>"
    I tried to get this resolved by following the Solution ID: 14020. Here is the problem. There is NO "Install Utility" in any of the Palm Desktop Installer file (either on the CD or downloaded from the website).
    In addition, I uninstalled Missing Sync the deleted Palm. I then re-installed Palm and Missing Sync respectively. The problem persists.
    Help!
    Post relates to: Treo 650 (Cingular)

    Ok,
    I have been thrashing on this one for a while. PLEASE, PLEASE, if this helped you pass this along to other forums because there are tons of people out there with this same issue and NO USEFUL information from PALM to fix it.
    The fix is easy. Basically the problem is that there is a remaining process running in FreeBSD subsystem that must be stopped in order to reinstall the hotsync/palm application correctly.
    Log in as root/administrator
    Go to terminal and type:
    ps -ax | grep -i palm
    this will show all processes that are running in the system that are part of the palm software.
    note the process number (on the left) of the list.
    killl nnn
    i.e if the left column says 654 type "kill 654" and hit enter
    now do the ps -ax again and make sure the process stopped.
    This also fixes that other issue when you try to empty the trash and you get an error that says Localized.rsrc is in USE. blah , blah, blah
    Now reinstall the palm software and breath a big sigh of relief. Have a beer and sync your palm.
    ..jeff

  • Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

    I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
    ErrorCode: -17600,
    Failed to load a required step's associated module.
    LabVIEW Run-Time Engine version 9.0.1f3.
    When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
    My TestStand Engine Version is 2012 f1 (5.0.0.262).
    I'd appreciate any help on this issue.
    Roman

    Hi Roman,
    There are a couple of things you can try:
    1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
    Check if the simple VI is loadable and runs without errors in TestStand.
    If the step generates the same error, you should try a re-install of the LabVIEW development system.
    If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
    1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
    Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
    Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
    2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
        Right-click "Build Specifications" and choose "New->Application(EXE)".
        In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
        Save the properties.
        Right-click on the newly created build specification and choose Build.
    Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
    You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
    Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
    If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
    Regards,
    TRJ

  • I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

    when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use
    *http://kb.mozillazine.org/Recovering_a_missing_profile

  • Not able to access javaFx charts from a remote system after using ext. jars

    We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
    1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
    We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlp’s inside our web project.
    It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
    system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
    project. But still it did not work.
    Before using external jars inside our java fx project my jnlp looks like:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
    <jar href="JavaFXApplication3.jar" main="true"/>
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
    <argument>MainJavaFXScript=misc.Test</argument>
    </application-desc>
    <update check="background">
    </jnlp>
    After modifying my jnlp as per my project as
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="/PiFx/FxFiles/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
    <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
    <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
    </jnlp>
    After adding external jars my jnlp looks like this :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
    <jar href="JavaFXApplication3.jar" main="true"/>
    <jar href="lib/jdom.jar"/>
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
    <argument>MainJavaFXScript=misc.Test</argument>
    </application-desc>
    <update check="background">
    </jnlp>
    I have modified the jnlp as per my project :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="/PiFx/FxFiles/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
    <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
    <jar href="/PiFx/FxFiles/lib/jdom.jar"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
    <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
    </jnlp>
    where PiFx is our project Name

    We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
    Now it is not able to get the external jar file only
    exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
    java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
         at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
         at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
    exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
    java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
         at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
         at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
    JavaFXApplication3.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
        <information>
            <title>JavaFXApplication3</title>
            <vendor>Saurabh</vendor>
            <homepage href="/PiFx/FxFiles/"/>
            <description>JavaFXApplication3</description>
            <offline-allowed/>
            <shortcut>
                <desktop/>
            </shortcut>
        </information>
        <resources>
            <j2se version="1.5+"/>
            <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
            <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
            <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
        </resources>
        <application-desc main-class="com.sun.javafx.runtime.main.Main">
            <argument>MainJavaFXScript=misc.MyChart</argument>
        </application-desc>
        <update check="background">
    </jnlp>JavaFXApplication3_browser.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
        <information>
            <title>JavaFXApplication3</title>
            <vendor>Saurabh</vendor>
            <homepage href="/PiFx/FxFiles/"/>
            <description>JavaFXApplication3</description>
            <offline-allowed/>
            <shortcut>
                <desktop/>
            </shortcut>
        </information>
        <resources>
            <j2se version="1.5+"/>
            <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
           <jar href="/PiFx/FxFiles/JavaFXApplication3.jar"  main="true"/>
            <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
        </resources>
        <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
            <param name="MainJavaFXScript" value="misc.MyChart">
        </applet-desc>
        <update check="background">
    </jnlp>Applet Code
    javafx({
    archive: "../FxFiles/JavaFXApplication3.jar",
    draggable: true,
    height:hgt,
    width:wdt,
    code: "misc.MyChart",
    name: appletName,
    id: appletName
    });

  • Job is not running in Source system.

    Hi Experts,
    One issue I have because of this I am not able to load data into Data sources.
    I am in BI 7.0 environment.
    when I execute infopackage, total and techinical status are in yellow.
    I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
    Result of customer enhancement: 0 records
    IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
    IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
    Synchronized transmission of info IDoc 3 (0 parallel tasks)
    IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
    IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
    Job finished
    Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
    It is Standard Data source but in the above statement becasue  *result of Customer enhancement:0 records.*
    please help me to reslove this issue to load data into BI.
    1. what I have to do to run job in source system side.
    2. should I take any help from Basis.
    Regards
    Vijay
    Edited by: vijay anand on May 14, 2009 3:02 PM
    Edited by: vijay anand on May 14, 2009 3:04 PM

    Hi Rupesh,
    in RSA3 data is availbale,
    but it is not coming to BI,
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
    the abovemessage I am getting in details tab.
    Regards
    Vijay

  • I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    I can't say personally since I never used AW, but see if these articles help:
    http://www.macworld.com/article/1166370/open_old_docs.html
    http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
    I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
    Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html

  • Error: Could not read Metadata from Portal Database !

    Hi All!
    My problem is when i am trying to open the portal page (Oracle 10G)
    http://domain/portal/page?_pageid=6,1,6_13&_dad=portal&_schema=PORTAL
    then i have an Error: Could not read Metadata from Portal Database.
    And i do not know why because everything is up and running. I can connect and browse my database schema with portal user. I can connect to pls/orasso and where ever i want.
    [07/Feb/2006:00:57:23 +0100] "GET /pls/portal/htp.p?cbuf=Test HTTP/1.1" 200 5
    plz help i am trying to fix this in the last 2 weeks :)
    thx kEndE

    Hi Andreas,
    I've changed the permissions to 775 and changed the ownership of /sapcd (volume name) to orasid:dba (including all files within the staging area /sapcd/ora-patch).
    So the permissions and ownership seems to be fine.
    I've also ran your suggested commands but the issue still exists.
    I'm now liasing with our UNIX guy to check if there is any underlying permission issues on the volume (sapcd) that may be causing this problem.
    In the mean time, let me know if you have any further thoughts.
    Thanks,
    Chris

  • Client transport from one sap system to another one

    When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

    Hi Damian,
    It is not recommanded to import TRs from SAP system not at equal level.
    Get both the systems at same level if possible.
    But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
    Regards,

Maybe you are looking for