Transporting Mirrored Content

Hello.
We've recently starting using Mirrored Content. This creates a delta-linked copy of the content you are "mirroring."
I need to transport these new objects to a new portal (from DEV to TEST).
When transporting, should I enable the "Resolve References" option? I noticed this literally doubles the number of objects being transported (I assume it's including all of the source objects as well.)
Any advice?

I'm thinking that if I choose "resolve references," the content will be transported with the delta link intact.
If I do not select "resolve references," the content will be imported as an independent copy, without the delta link.
Is this correct?

Similar Messages

Error while transporting migrated contents

Dear SDN,
I had a requirement to transport the contents of Migrated Folder in Portal. I guess these contents have been migrated from EP5 to EP6. The contents in this folder are some standard SAP objects, i.e., iviews, pages, etc. The contents are working fine in our quality portal.
I had a standard SAP Page which had some standard SAP iviews attached to the page. The page as well as iviews were working fine in Quality. I transported the standard SAP Page and all the iviews folder to production, since iviews folders were not appearing in production. Now when I preview the page, page gets opened up properly but the iviews shows error on the page. The error displayed by the iviews is :
*Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:54_06/03/09_118801351
Refer to the log file for details about this exception.*
Regards,
Shreya

Hi shreya,
Any PCD content with ID starts with com.sap...... cannot be transportted from one system to other system.
You can do a work around.
You can change the ID from com sap to com.abc(any). Then you can transport them.
But don't change the id of standard ones. Only duplicated once (copy of standard ones) can be transported.
Hope that helps.
Raghu

Unable to create a customizing request to transport BPC10 content to Quality

Hi
Unable to create a customizing request to transport BPC10 content to Quality .
From the transport connections tab, i am selecting the required objects and then clicking the transport truck but it does not pop up and ask for a transport request .
So please provide any solution.

Hi,
Check whether Standard transport switched-on is enabled or not. To get transport request your setting should be as follows : RSA1-->Transport Connection-->Edit-->Transport
Hope it helps...
regards,
Raju

Problem in transporting WPC Content

Hi,
I am facing problem in transporting WPC Content from server1 to server2. After transport the webpages are not displaying the contents. Webpages are showing empty layouts. I have done the layout configurations. Webpages are cotaining iViews and Html contents from KM . The webpages are not allowing to edit. Its very urgent.Help me to get through this.
Regards,
Mallini.V

Hi MaliniV,
Before you transfer the WPC content from one server to another, you need to be very careful about the settings and configurations. Did deply the WPC on the other server ? Did u do any custom page layouts in development server ? if yes, you need to do the same in production server as well. if not , it won't work.
I too had the same problem before. but ! after checking all these , I corrected them.
I hope this will help u.
Thanks
Suresh

How to Sort transported KM content based on the creation date

Hi ,
I transported KM content through ICE offline transfer. all the files are copied. but the problem is all are copied with the todays date as modified date.
but I need to sort these based on the creation date.
all these files are with the xml templates.
Can only help in this regard
Thank you

Hi,
Enter the format that you have defined in the configuration of the property in the Additional Metadata parameter. Use the syntax customFormat=<pattern>.
In this link, you have at the end screenshots where to navigate in KM to see the property metadatas of your property:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf
Here see the Defenitions of the KM Metadata Properties:
https://wiki.sdn.sap.com/wiki/display/KMC/DefenitionsoftheKMMetadata+Properties
Regards,
Praveen Gudapati

Transport table contents

Hello experts
I am trying to transport the contents of a table from one system to another, using a request.
When I select all the table data in SE16 then and go to menu Table entry- Transport Entries. By default a prompt for customizing request pops up and even if a create a customizing request and try to proceed I get an error message u201CTask BWDK901759 belongs to a different categoryu201D
Any ideas plz
Thanks in advance

Hi,
sounds like there is something wrong with your transport system. Check with a basis guy. There have to be a different setting in the transport system or you can manually enter a different category to the request so that it will be valid for your purpose.
regards
Siggi

LSADMIN CMS authorization problem - How To Transport XI Content Using CMS

We are configuring CMS using the "How To Transport XI Content Using CMS". For the LSADMIN user we have added the SAP_XI_CMS_SERV_USER and SAP_SLD_ORGANIZER roles. We have followed all of the steps in the guide.
The problem we are encountering is that when we define the domain but put in the LSADMIN as the user, we get an error - "SLD (URL http://server:50000) server exception: HTTP response code: 403 Forbidden"
We then gave the LSADMIN all of the roles of XISUPER and restarted the J2EE engine. We still have the same problem. So we changed the CMS User to be XISUPER and we could save the domain. Now, we have another problem - when we try to export from dev using CMS, we get the following problem:
"Sent on 3/9/06 at 1:26 PM: Unable to establish connection to CMS server http://servername:50000. Unable to transfer the following transport lists: Export list for ...
Details: unknown exception: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: version=0,dtrWSName=
Check the availability of the CMS and the user authorizations and send the transport request again if necessary
We are on SP16. Anyone encountered this issue?
Regards,
Jay

Here are all of roles we have given LSADMIN in client 100:
SAP_CMS_ADMINISTRATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_CMS_SERV_USER
SAP_XI_CMS_SERV_USER
SAP_XI_DEMOAPP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
But on the J2EE side, we only see the following roles for LSADMIN:
- Authenticated Users Built-in Group Authenticated Users
- Everyone Built-in Group Everyone
- SAP_XI_CMS_SERV_USER Exchange Infrastructure: Change Management Service User
I checked client 000, and noticed that LSADMIN only had the SAP_XI_CMS_SERV_USER. So this the problem. I added all of the roles to LSADMIN in client 000 and restarted J2EE and now i can see all of the roles under the LSADMIN user in UME.
We noticed the problem that our UME configuration was pointing to client 000 and not client 100. If we go to Visual administrator and go to the Services->UME Provider, we see that - ume.r3.connection.master.client points to client 000. We will need to change this.
That was the issue. UME was pointing to the wrong ABAP client. I appreciate all of your help.
Regards,
Jay

Transporting KM Content with WebDAV or ICE?

Hello all,
does anybody know what are the main differences between transporting KM content (folders, files,) with ICE and WebDAV? Especially in the scope of transmitted data.
About transporting KM Content with ICE I found a lot of Information, e.g. predefined properties and ACLs are transmitted but no service ACL,.
But how is it with WebDAV?
Our idea is to to use the WebDAV repository manager to access the development portal (source)and make its content available for read and write access in Content Management of the test portal (destination). After that we want to transmit the data per copy & paste from the WebDAV repository (source) to the destination folder.
Which datas will be transported <i>(acls, predefined properties, custom properties, system properties and folder settings like approval,versioning, manual ordering..)</i>?
Is there any documentation about this?
Thanks in advance for any help.
Best regards
Nicole

That's not really a WebDAV question. The KM's copy command copies a certain set of information, no matter what the repository manager is.
This includes content and custom properties, but that's it.
Best regards, Julian

RELIABLE Way To Mirror Content From An iPad?

Hello,
I am looking for a RELIABLE way to mirror content from my iPad 3 to an HDTV; specifically from the applications of DirecTV, Dish Anywhere, or Showtime Anytime. HBO Go does indeed support AirPlay, but none of the others for now. I do see Apple has an 30-pin-to-HDMI cable to do this with, but also see allot of complaints because of the HDCP voodoo that is involved and only allowing certain content to be mirrored. Yup, it is all such a technological moving target when Hollywood lawyers are involved.
Unless someone has more information, it looks like my best bet "currently" is to use Apple's 30-pin-to-component cable for the most consistent (yet not as crisp) audio/video to my HDTV. Please weigh in with your firsthand experience especially.
BTW, does anyone know of any pending changes to this issue with iOS 7?
“Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.

Thanks for that suggestion and yes, I do have AppleTV, but I am still unable to get some of the applications mentioned above to mirror to my HDTV. HA, in fact, how else whould I get AirPlay to work with my HDTV?
Once again, I am looking for an across the technological board way to mirror any audio/video content from my iPad 3 to my HDTV. No copyright protection hurdles, no HDMI handshake frustrations, no inconsitant digital dropouts.
Thanks,
Dr. Z.

Mirroring Content Viewer / Published DPS

We are still in the testing phase and still using the free Content Viewer on our Original iPad and iPad 2. I've looked for this information but haven't been able to find anything. Does anyone know if your able to mirror Content Viewer to a projector? Or once you publish your folio, are you able to mirror it as well? From what I've read, only certain apps can be "mirrored" on the iPad.
We will be using the Apple Digital AV Adapter.

Maybe we're talking about two different things. I take my A/V cable for my ipad, plug it into the ipad's bottom port, and then connect it to our projector. From there I can display my ipad on the screen, and that includes running the Adobe Content Viewer as well as DPS publications from iTunes (such as National Geographic). I just did it now to confirm I'm not crazy
Neil

How to get objects necessary for transporting Business Content?

Hi Experts,
Small ques for u:
I have installed 0FIAA_C11, 0FIAA_C12, 0FIAA_C13 for Asset Accounting in Dev system. Already the previous content 0FIAA_C04 was installed and transported to Quality system.
Now I want to transport new content (0FIAA_C11, 0FIAA_C12, 0FIAA_C13) to Quality. But I guess since already some infoobjects were transported to quality, transport connection wud nt show me all necesary objects.
<b>So how to get a list of all objects necessary</b> so that my req does nt fail while moving to production from quality.(I think req might not fail while goin from Dev ->quality).
Thanks in advance!!
Sorabh

Hi Srini,
I have already applied "Before setting". But the problem is I dont want to transport objects which are not relevant to me, but only those which are necessary for content described in previous mail.
If we check the link provide by you " For activating an InfoSource, InfoObjects may also be necessary which are not contained in the InfoCube and have therefore not yet been collected. However, for these additional objects, the objects that come before them in the data flow are not collected.
" I am worried by about these.Some objects will be missing and some are in addition which are not all required, and we shud nt transport them.How to be sure tht transport will not fail and it is consistent as well?
Thanks for replying!!
Sorabh
Message was edited by: sorabh arora

Transporting EP Content over NWDI

Hello,
we are trying to transport EP Content over the NWDI. We have a Netweaver2004s with SP8. The documentation we are refering to is "How to... Transport EP 6.0 Content."
On Page 25, we are creating a development component but we can't find in our NWDS under the content the Enterprise Portal Content Archive.
We only see UME.
Is it not possible anymore to transport EP content with Netweaver 2004s?
Thanks
Alexander

Hello Alexander,
It is still possible. You have to add the DC type 'Enterprise Portal Content Archive' manually, as described on page 24 of the PDF (Configuration of SAP Netweaver Developer Studio). You have to add an entry to the componentTypes.xml file.
Regards,
Christophe

Transporting table contents

Hi ,
I have created a master data table and i need to transport its contents ( the table is already in quality ) from devlopment to quality server but it is not at all asking for a request.Please help me out

Hi Arvind,
Probably your table is not marked as Transportable table.
Go to table Maintanance and see if Standard recording routine us checked.
You may also want to build the transport manually, Follow below steps:
1) Go to SE01.
2) Click on the 'Create' icon.
3) Select 'Workbench Request'(assuming your table is not customizing table).
4) Enter description and click 'Save'.
5) Put cursor on the task (lower number of the two) and in menu, 'Request/task-->
Change Type-->Development/correction'.
6) With cursor on the task(lower number), click 'Object List' icon on the toolbar.
7) Once in, you need to toggle to 'Change' mode using the pencil icon.
Then click on 'New Entries'. Now add the R3TR, TABU, <ZTAB> in the first row.
Again in the menu, select 'Extras-->Change object function-->Key according to key list'.
8) Now go to the menu, 'Goto-->Key list'. In the subsequent screen, click on 'Insert line' icon
(with a + sign).
9) Click on 'Key fields' button and it will now allow you to enter the values for each key field.
Regards
Shital

HT204291 Does mirroring automatically mirror content to other devices which are registered under the same name ? If so does this occur across different distances? Does Apple Tv store mirrored content?

Does apple tv automatically mirror content from one device to all other iPad or mackbook devises which are registered under the same name? If so does a device have to be in the same area ?

Welcome to the Apple Community.
Mirroring only works FROM a mobile device TO an Apple TV.

Transporting KM Content from 7.0 to 7.3

Is it possible to transport KM content from 7.0 to 7.3? I can export the content from 7.0 just fine, and then upload the transport in 7.3 just fine. But when I select the transport in "Pending Imports" and choose "Start Import", the import fails every time. The only info I can find in the import log is "Error Import "EPD_CONTENT" (d00ec46a-66bc-2e10-e1ab-8330d94df02e) failed with 1 errors after 0 minute(s) 0 second(s)".
Any idea why, or if there is some trick to this transport?
Thanks,
Owen

What is your server setup for the portal?
I have a new portal install of 7.3 on a different server than my 7.0 portal. Usually, when I transport KM content from EPD 7.0 to EPP 7.0, it automatically saves the transport on the K drive. I then download the transport onto my S drive manually. When I import the transport into EPP 7.0, I upload the transport from the client machine (my S drive) and everything works fine.
When I do the same thing for creating the transport package, and then upload the transport into EPD 7.3, it works fine also. Then when I try to actually import the transport, it gives me an error. The logs say the following:
Sep 29, 2011 11:30:49 AM    Info    Starting import "ZEX_SPS_REPOSITORY" (f055d3b8-cdcc-2e10-0ba4-d618f8fd400a) using mode "MergeFolder" (ConstantID=false)
Sep 29, 2011 11:30:49 AM    Info    Importing from "K:\usr\sap\EPD\SYS\global\config\cm\expimp\import_work\f055d3b8-cdcc-2e10-0ba4-d618f8fd400a"
Sep 29, 2011 11:30:49 AM    Error    Import "ZEX_SPS_REPOSITORY" (f055d3b8-cdcc-2e10-0ba4-d618f8fd400a) failed with 1 errors after 0 minute(s) 0 second(s)
Sep 29, 2011 11:30:49 AM    Info    Statistics: 199 items (16 folders, 183 files, 0 links), 14257152 bytes in total
The only thing that looks curious in that log (besides the fact that there is an error) is that it says it is importing from the K drive. That's not where I uploaded the transport from, I uploaded it from my S drive. Does it always say that?
Any other ideas?
Thanks,
Owen

Transporting Mirrored Content

Similar Messages

Maybe you are looking for