Transporting of Data Transfer Processes fails
Hi to you all!
Ive a problem when transporting DTPs
Always the import of a DTP fails in the after-import method RS_DTPA_AFTER_IMPORT with the same error message.
At the step Post Processing/Checking the Activation for Data Transfer Process <name of DTP> the following error occurs:
<b>
PSA table name was blank
**** Error from PSA ****
Error when activating Data Transfer Process
</b>
So I built a test case with a simple DTP.
First I successfully transported a simple InfoObject as the source of the DTP.
Then I successfully transported a simple DataStore-Object as the target of the DTP.
Next I successfully transported the transformation of the DTP.
The transport of a DTP still fails with the error message mentioned above.
Ive no idea what the error message what to tell me
Any suggestions?
Thanks
Kai
PS: I' currently working SP09...
Steps you followed seems to be correct
You may wish to check OSS Note 1020231 - 70SP13: UNCAUGHT_EXCEPTION in after import
Hope it Helps
Chetan
@CP..
Similar Messages
-
Errors in data transfer process
Hi,
i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one help me. i have check all the connections between mobile and CRM server. will reward points!!!
2324 96c ! Entering 'PullMessages' for queue 'CRM_SITE_000000000000274' / limit 20 messages
2324 96c Fri Aug 24 20:28:22 2007 E
NewTransferService - _TransferPullMessages : <b>DotNet Stub.TransferPullMessages call failed with fffffffa:</b>(null)
2324 96c E
_TransferPullMessages failed with fffffffa
2324 96c Fri Aug 24 20:28:23 2007 E
regards
Kamalesh K.VHi,
We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
<b>" NewQmtCnfg Version 2.0 for Windows 2000 - revision 4003
Assume running on Client
1. Try to access Communication Station 'MTV01sdCR02', please wait...
... OK
Try QmtServer component initialize check, please wait...
...OK: QmtServer initialize call returns successfully
2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
...OK: CRM Server call returns successfully</b>
regards
Kamalesh KV -
Data Transfer Process filter: how to view the filter values?
Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
JeanHi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh -
Errors druing Data Transfer process
Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
ThomHello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks -
Is there any documentation for filter routine in Data Transfer Process?
I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0data: l_dow TYPE I,
L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
date = sy-datum
IMPORTING
day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF. -
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
Hi,
I am having problems with a data transfer process, i am getting the message:
Extraction datasource Z_WMS_VRM
Prepare for extraction
Exceptions in Substep: Extraction Completed
Processing terminated
When I click the button behind "Exceptions in Substep" it jumps to a line with
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
The datasource is an external DS filled by powerexchange 4.
The system's current support pack is 18.
Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
Edited by: Thijs de Jong on Jun 23, 2009 12:11 PMHello Thijs,
The same issue happened to me this week. This can happen for several reasons:
- Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
- There is no more tablespace in the DB.
- There is a deadlock when reading a table (maybe the table is too big...)
Hope this helps.
Cheers,
Stephan -
Issues in Data Transfer Process
Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
NithinHi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM -
Data Transfer Process and Delete Overlapping Requests
Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
ScottHi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks -
What is the "Data Transfer Process" in the BI7.0, and how does it work?
Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks -
Data warehouse monitor initial state data synchronization process failed to write state.
Data Warehouse monitor initial state data synchronization process failed to write state to the Data Warehouse database. Failed to store synchronization process state information in the Data Warehouse database. The operation will be retried.
Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.MonitorInitialState
Instance name: Data Warehouse Synchronization Service
Instance ID: {0FFB4A13-67B7-244A-4396-B1E6F3EB96E5}
Management group: SCOM2012R2BIZ
Could you please help me out of the issue?Hi,
It seems like that you are encountering event 31552, you may check operation manager event logs for more information regarding to this issue.
There can be many causes of getting this 31552 event, such as:
A sudden flood (or excessive sustained amounts) of data to the warehouse that is causing aggregations to fail moving forward.
The Exchange 2010 MP is imported into an environment with lots of statechanges happening.
Excessively large ManagedEntityProperty tables causing maintenance to fail because it cannot be parsed quickly enough in the time allotted.
Too much data in the warehouse staging tables which was not processed due to an issue and is now too much to be processed at one time.
Please go through the links below to get more information about troubleshooting this issue:
The 31552 event, or “why is my data warehouse server consuming so much CPU?”
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
FIX: Failed to store data in the Data Warehouse due to a Exception ‘SqlException': Timeout expired.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein -
Data transfer process: use values of filter in routine
Hi,
I create a filter in the data transfer process (RSA1). There are two infoobjects (ZABC, ZXYZ) in the filter.
I fill the first select-option (parameter) with the value u2018AAAAu2019. At the second line I create the filter routine:
form compute_/BIC/ZXYZ
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
In this routine I want to use the value u2018AAAAu2019 of ZABC:
SELECT SINGLE *
INTO lw_test
FROM /BIC/MZXYZ
WHERE
/BIC/ZBCA = (Select-option value from ZABC = u2018AAAAu2019)
Then I want to make a new entry in l_t_range from lw_test.
I thought that the Select-option will be in the table l_t_range. But there is only a record when it was also set by an ABAP-Routine but not the manual entries in RSA1.
How can I use the select-option from the filter?
Thanks in advance
Tobias Mattes
Edited by: Tobias Mattes on Jan 30, 2009 1:33 PM
Edited by: Tobias Mattes on Jan 30, 2009 1:34 PMCan you try to combine them into one routine? In other words, fill the range for both in the same routine - that way, you'll have all the values available to you.
For example:
l_t_range-iobjnm = 'ZABC'.
l_t_range-fieldname = 'ZABC'.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = '2006001'.
l_t_range-high = '2006012'.
l_t_range-iobjnm = 'ZXYZ'.
l_t_range-fieldname = 'ZXYZ'.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = '0101010'.
l_t_range-high = '0101099'. -
DTP (Data Transfer Process)
Hi, I would like to know more about DTP (Data Transfer Process), how can i use it to replace infosources, transfer rules and update rules in just one transformation.
I will be very grateful for your comments and your help...
Thanks and regards!hi,
You use the data transfer process (DTP) to transfer data within BI from a persistent object to another object in accordance with certain transformations and filters
It is like a replacement of the info packages in the olderr versions.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
youu can refer to this link for mor infos.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
hope it helps.. -
RE: Transformation and Data transfer process.
Hi guys,
Please some bosy help me out by providing the differences between Transformation and Data Transfer Process.
thanks in adwance
omkarHi Omkar,
Trnasformations providing the mapping between Sorce fields( datasource to data target). only map the structures..
<b>Transformations:</b>----
-->Trsnsformations are used to create mappings between two BI Objects and to
transform data from BI Source(From where) to BI Target .
-->You can create One-One Mappings between source and target in BI
-->In transformations Source is : DataSource, InfoSource, DataStore object,
InfoCube, InfoObject and InfoSet
-->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
-->Transformations replaces the transfer and update rules.It's like creating transfer
rules and update rules.Through these rules/mappings/transformations, the
system is going to transform data from Source to Target.
but DTP means.. the data loading procedure will be done with this step..
<b>DTP :</b>
DTP is used to transfer data from PSA to the infoprovider.
The data transfer process can also be used to control data distribution from a BI system into any target outside of the BI system. For this purpose, a data transfer process with an open hub destination is used as the target.
Since Deltas are now based on request from PSA ,you can have multiple datatargets pulling data with same selection criteria from same datasource(ECC) with INITS/DELTA,not possible earlier.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
regards
@jay
Maybe you are looking for
-
OC4J Install for APEX printing
Hi, I have an Oracle 11g Enterprise Edition insalled on my Windows 2008 server. I am now trying to get the report printing option to work within APEX. One of the options was to use OC4J + Apache FOP to get this going. However, I'm hitting problems wh
-
I have a relative that keeps sending me pictures with her texts. I was wondering if there is a way to remove the pictures from the phone, but still save the conversation.
-
I needed a refund back from Apple. I never got it!
I had boughten the MMDPlayer, and it did not fountion correctly, and it was an accidental purchase. I waited for my money--its been a week-- and I have not gotten it back. Please help!
-
Migration assistant doesn't "see" Time Machine disk
Just got a new logic board, and they wiped the hard drive. My Time Machine disk mounts, and I can see the files. However, migration assistant doesn't list it as a source. (Yes it's formatted Mac OS Extended [Journaled]) Time Machine recognizes it
-
Hey guys and girls. Today I am really bummed. I finally got around to upgrading my iPhone 4 to ios 5 beta 2 along with iTunes 10.5 beta 2 (yes the legal way) on my Windows XP pro desktop. Anyways, I upgraded both itunes and my iPhone 4 (Verizon versi