Transporting only data views in TSOBJ

Hi,
We have three data views in a planning book. We changed macros for one of the data views and want to transport only that data view to production. we actually don't want to transport one of the other two left, since that was a test view we created.
When I go into TSOBJ and create a request, the system is picking up planning books in transport and in SE01, I can only see the planning books.
Looking at the thread below, I thought I could go into the transport request and delete the other two data views.
Re: Planning Book Key figures Greyed
we are on SCM7.0. Has some thing changed since this post? any idea?
Appreciate any advise. thanks.

Hi,
I have recently used this option what Aparna specified for one of my macro changes. I can also confirm that this transport of only the relevant macro book will work fine.
If you are using the macro in some background job, then do remember to also transport the background job by using TSOBJ.
Thanks - Pawan

Similar Messages

Error message: Bind operations are only supported in a single data view.

I created a new connection handler and data view. When I started ldapsearch I got the above error message. Would like to know how caused that and how to fix it.
I tried to roll back all my modification and use the default connection handler and it even gave me the above message.
Thanks!

Thanks Ludovic!
It happened when I tried to create two different data views(view1 and view2) and two different connetion handlers (conn1 and conn2).
view1 will view all data under the root suffix, like dc=example,dc=com
view2 will view only part of the subordinate, like ou=test,dc=example,dc=com (not sub-suffix)
I set data-view-atuomatic-routing-mode to limited. So view1 will not have exclude list.
conn1(priority 33) will use view1. I also set bind-dn to be "uid=testmanager,dc=example,dc=com"
conn2 (priority 99) will use view2 with no constraint.
When I started doing ldapsearch using that bind DN of "uid=testmanager,dc=***) and expected to use conn1 (since it fell into the criterial of the bind DN), I encourted this error.
This error kept on existing even I removed the view1 and conn1. I doubt that I should recover the default setting of routing policy (data-view-automatic-routing-mode), but don't know what the default value for that, maybe "automical" or something else.
My questions will be:
1) can i create two different views like one pointing to base and the other one to sub directory?
2) What is the default value fo data-view-automatic-routing-mode?
Thanks!

Data View Web Part - List of Subsites and Document Libraries under Current Site - Must be able to Package as Site Template in SPDesigner

Hi Guys,
On the home page of each sub site I would like to be able to show a list of subsites and Document libraries that are under the current subsite.
I started investigating a solution using Datasources with SOAP requests sent to the server but it is very difficult to understand how to surface it on the Data View WebPart.
I have tried with the search results webpart but the problem is that it does not work well when packaged in a Site Template.
Please advise.
Thanks and Regards,
Rhyan

Ok,
Here is the problem:
When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
I searched all over and cannot find this documented anywhere.
Who do I contact to have Microsoft document this?
It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

Bind multiple fields to one node in data view

I have a need to have an interactive form where data from a single data source is displayed in multiple fields on the form. In addition these fields are open for input. I have bound the multiple fields on the form to one node in the data view. The data is being displayed in the multiple fields. This form is being routed thru workflow so various agents are updating the form. The problem that I am having is that the form only seems to allow input in the first field on the form but not the other fields that are tied to the same data source. For example, field A and field B are bound to node SUMMARY. I can add/change/delete data in field A but not in field B. After I have done some entry in field A, I can then sometimes make changes in field B. We have a requirement that field A be enabled for agent #1 but field B is invisible. Later in the workflow, agent #2 needs to make final changes on a "summary" page so agent #2 had field B enabled.
Does anyone have any idea how to correct this data entry issue so that data can be entered into either field that is tied to a single node?

Having multiple fields in the backend is not an option. I will not go into the business reason in detail but the last page of the form contains a final version of data pulled from various locations on the form where the data on the other pages was input by multiple agents in the process flow. The last agent in the workflow needs to put the "finishing touches" to the data and should not have to search all over in the form to find the appropriate data fields.
I have found 2 possible solutions and would like to know if anyone can recommend one over the other.
First solution - bind multiple fields on the form to one node in the data view. This seems to work correctly on the form and data can be entered into either field, with the data being passed back to the webdynpro context in the one node in the data view (corresponding node in WD context).
Second solution - the node/attribue in the WD context must have the same name as a DDIC element. The node in the data view must have this same name. The field names on the form must also have the same name. Define the binding for the field names as Global. I have not validated that the data is passed back to the WD.

How to get rid of the "mil" in Data View's large Display meter

Hi, there! I have two analog voltage inputs that I am having signal express V2.5 to collect data on. The first input is scaled to inches while the second input is scaled to pounds. For some reason, as i bring up the large display in Data View, the meter will show this "mil" thing. It won't go away until the scale reaches 1.0000. For instance, if the scaled signal is less than 1.0000, it will indicate 900mil, 800mil, 50mil 1mil, and so on..... This really created alot of confusion for my lab.
I am hoping if you guys can tell me a way to make 900mil to become 0.900, 50mil to 0.050, and 1mil to 0.001
Thanks in advance!
Kin

Hi Kin,
Sorry about this. I don't believe there is a way for you to change this in SignalExpress 2.5. However we did add this ability in SignalExpress 3.0. Most displays now have a property page, including the Large Display, which allows you to specify the format and precision shown, including to remove the SI notation. By right-clicking on the Large Display and select Properties, go to the Format & Precision tab, and select the Floating Point option (instead of SI notation).
Again, I'm sorry to say that this option is only available in SignalExpress 3.0+.
Phil

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

How to bind data from script created variable to embed element of XML schema (xsd) in "Data View"

Hi, i have got another problem with livecycle designer scripting.
I have got script line which is defining of string variable:
var aaa = "this is my string";
and i have got embed XML schema like this (it`s only short part of whole file):
... xs:element name="bbb" type="xs:string"/ ...
After saving data to XML i would like to get "this is my string" as a value of my "bbb" XML element.
To save this data i`m using submit button which is connect with submit.php file on my server.
How to connect script created variable and embed XML schema element which is present on my "Data View" tab.
Please help me a bit becouse i don`t know even where to search answer of it...
Of course i know possibilities to create fake unvisible text field object and bind it with 'bbb' and than put "this.rawValue = aaa" to connect those two variables but i think that is not a good idea to solve it in that way. It`s too primitive

i solve it, i should write this:
xfa.datasets.data.bbb.value = aaa;

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Planning Book Macro which can read different key figures from data views

Hi Experts,
I am looking for help to create a Planning book level macro which is having capabilities to read different Key Figure across the different Data Views. For example DataView 1 has Sales Orders and Data view 2 has Forecast and I want put in Data view 3 the netted numbers from SO and Forecast.
Please provide me some quick pointers.
Regards,
Rahul Mohnot

Hi,
Not only is it the easiest way, it is the only way to do it as Laurence has put it. As you can see, macro workbooks are created for a Planning Book/Dataview combination.
Thanks
Mani

Changes in Data View

Hi Expert,
I am changing certain fields in planning book and date view for a particular planning area I want to know how to transform the changes in to quality system for testing, I think I have to transport this, but I have not done this before
Please guide.

Hi
To add to what Amol has said , you have to make sure you back up the data in the quality system before releasing your transport . You have not mentioned whether your planning area has time series key figures. If it does then you are going to lose the value of your key figures. To recover , you can backup your data to cube , migrate the changes , and then reload the data again from the cube to the P.A .
Thanks
Aparna

IDOC: Material master data views

I create a material with an IDOC. The IDOC only contains basic data (i.e: segments E1MARAM and E1MAKTM).
However when I look at the material in MM03, I see all the data views.
Is this do to missing config in SPRO -> Material master configuration
I just want views that have data from IDOC

Hi,
You can check the partner profile for that partner.As my understanding in your case reduced idoc is created and that is used in the partner profile.May be that reduced idoc contains only the basic data segment only.
Thanks and regards,
shyla

Attribute handling in Sun Java Directory Proxy Server join data views

Hi all,
I've configured a join data view and want to get rid of the duplicated attributes that show up in the search results since they are present in the primary and the secondary data view. The documentation says that this behaviour is configurable to return only the values of the primary data view but I can't find any information how to do it.
Can anybody shed some light on this?
Thanks and regards
Geli

Hi,
If an attribute is present on both sides and if you want to consider the value(s) from one side only, use the viewable-attr or non-viewable-attr property at the data view level. You can specify which attribute(s) are /are not exposed by that data view (policy for read and write may differ).
For more details, have a look at [http://docs.sun.com/app/docs/doc/819-0986/non-viewable-attr-5dpconf?l=ko&a=view|http://docs.sun.com/app/docs/doc/819-0986/non-viewable-attr-5dpconf?l=ko&a=view]

Transporting modified data target to production which has data?

Hi,
I have a cube for which i had added two more fields and changed the data model accordingly!
Now, i have a question:
In production this cube is filled daliy and now it has some data records in thousands!
what happenes if i transport this data model with out deleting the data in production?
Though we are in BI 7.0, i am using the 3.x datasources only!
Raj

Hi Raj,
What fields did you add?
Characteristics --> Cube must be empty before transport. You will have to reload the cube.
Navigational Attrinutes --> no problem. You can even use them in your queries. they will be "filled".
Key-figures --> no problem, but no historical data. These fields will only be filled from the moment you have transported the update rules.
Success,
Udo

MSS: Employee Search: Data View

Hi All,
I need a few clarifications regarding the Data View of Employee Search/Team Viewer iview.
1)"Click"ability of Employee in Data View
2)"Click"ability of any other object type, like Org Unit or Position in the Data View
After my trials, I'd like to know the following.
If I use the delivered object selection rules (in SPRO config), I'm able to click on the employee (i.e there's a link under the employee name in the Data View). If I use any other rule (a custom object selection rule with evaluation path O-S-P) I dont get the "link" under the employee name in the data view. Any reasons for this behaviour? or any rules regarding an object selection rule?
If I display Positions or Org Units in the Data View, they are not clickable either. Is this not allowed? Is Data View only to display employees?
If there's any other forum I'm more likey to get an answer, please lead me there.
Cheers,
Rajit

Hi Rajit
In most of the HR Implementation projects,in front end some of the fields are only displayed to the end user,The Examples of the fields are Position,Org unit,personal area,personal subarea,company code,Functional org unit,job number,some times cost center is also display only to end user.Even I am also in the project of HR Implementation as webdynpro as a front end we generally will not give a chance to enter the above fields by the end user.
Regards
Kalyan

Filter in data view web part using sharepoint designer 2010

Hi,
i have a scenario that there are 4 column Name, shift time, Location, Date. so i have to create a data view web part using designer.
further conditions are:
1.Shift time should be radio button and filter the data accordingly.
2. Data display only for current date(system date).
3. Group by Location.
i have complete all things except how to display data according current date. its showing all dates result.
So please help me how to give a expression or filter to do this. if you have xslt code then plz let me know.
Please help ASAP.
Thanks
Vivek

Hi Vivek,
If i understand it right, you know how to do other bits and want help in displaying data for only current date. on your view you can use filter condition as :
                column: Date
                condition : is equal to
                 value:    [Today]
Let me know if this helps.
Regards
P
Please don't forget to mark an answer if it solves your problem.

Transporting only data views in TSOBJ

Similar Messages

Maybe you are looking for