Transporting PORT IN ALE Config

Hi,
I have created a PORT in DEV using WE21. After creating the port it hasn't asked the transport request.
How to create a transport request for PORT to tranport it to TST system or PRD system.
Could you please help me regarding this.
Thanks,
Lin

You need to re do in PRD system.
Regarding partner profile:->
From Distribution model screen(TC BD64), click the model that needs to be transported. Then type shift-F1. This would pop a little window with the model name that you initially clicked. Click 'enter' and it will bring you to a screen to create a transport.
aRs

Similar Messages

  • CRM to PI outbound IDOC scenario : IDOC ALE config

    Hi folks,
    I have a scenario: CRM-> PI
    CRM system posts an IDOC to PI,
    I have done all the necessary ALE configs:
    1. comm. id on PI
    2. RFC Destination on CRM to PI
    3. Port on CRM. we21
    4.Logical SYsm on CRM
    5. Partn Prof on CRM
    now, when i try to push out an idoc out of CRM , it fails in CRMs TRFC queu(SM58)
    with this error:
    Transaction IDX1: Port SAPDX1, client 500, RFC destination contain error
    I have no clue why it failed with this error.
    1. No idea from where it picked up this port as well.
    2. Port i created to PI was an autogenerated Port and not SAPDX1, don't knw how it picks this up.
    Would appreciate any help with respect to this.
    Thanks,
    Hank

    Also, for your reference just double check if the following steps are completed properly for outbound processing:
    1.Define Logical Systems and Assign Client to Logical System u2013 Transaction SALE
    2.Maintain RFC Destinations u2013 Transaction SM59
    3.Define Ports u2013 Transaction WE21
    4. Maintain Distribution Model u2013 Transaction BD64
    5.Generate/Create Partner Profile u2013 Transactions BD82/WE20
    6.Distribute Model View u2013 Transaction BD64
        -Select the Model View
         -Go to menu path Edit -> Model View -> Distribute
         -Result log will be displayed on the next screen
    Hopefully it should work now.
    Puneet

  • Urgent...problem in  manuall ale config

    hi all,
    when iam doing ale config for a a simple vendor master data transfer i got error.
    the first 3 steps r ok. rfc destination and test connection and remote logon is ok.
    in step 4 ..i assigned a message type(cremas) to the modelview.when i expand modelview i shows sender lg sys,rec log sys and cremas,no fillers in cremas.
    1)but when distribute modelview it shows no message type is assigned to modelview.
    2)in partner profiles i generate ports . here also i got error. partnet profile is not generated to the xxxx log sys and  cancelled  in both xxxx and yyyy log sys..
    reply please.
    vijay

    Hi,
    Try creating the ports and partner profiles manually through transactions WE21 and WE20 respectively and then the distribution model (txn BD64). Now try distributing the model view and proceed with the Idoc generation.
    ~ Bineah.

  • What is Port  in ALE can any body tell please!!!!!

    What is PORT in ALE can any body gives me info
    thanking you
    Kamaal

    Hi Rama
    As much as i know
    1) Yes we can use File port for ALE. (Not Exactly sure how).
    2) RFC destinations is used to connect to SAP systems.
    And when two SAP systems try to communicate they use tRFCs.
    3) The use of ports in defined in ALE layer of SAP. Different types of ports are used to send Idoc data.
    4) ALE uses RFC Connections. An RFC connection should have an RFC destination for it to work.

  • ALE Config for Solman BPs

    Is there any documentation out there to help me in setting up ALE between ECC and Solman to create BPs in Solman. I have basic documentation on ALE config in general but am looking for specific docs for Solman BP population.
    Thank you,
    Alex

    Hi Alex,
    Solution Manager was based on CRM so I will recomend you to start with Note 550055 - EBP/CRM: New integration for business partner
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index
    This will give you the guideline, what I would suggest is to mantain as well the Org Structure in 1 system in this case ECC and then replicate maybe the Support Org Structure along with the BP's to Solution Manager.
    Another SAP Note you cam use 615896 - HR-ALX: Distribution models - Templates, Most probably you have the templates in your system if you have current SP's, I do remember I saw some templates for CRM which will work fine for Solution Manager.
    Hope this helps
    Best regards,
    Juan Jose Alvarado
    Edited by: Juan Jose Alvarado on Mar 1, 2010 5:27 PM
    Edited by: Juan Jose Alvarado on Mar 1, 2010 5:31 PM

  • Ale config part 2...question

    Hi,
    While doing the ale config as per blog...
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I managed to distribute the model view..however when i go to BD10 and select the specified material SWAR1...out of matmas...i get an error telling me that no material could be found.............How can i test that i can send an idoc to the XI system....? is there a standard material that i can send to verify this...
    Venkat

    There are no standard material numbers avaiable in SAP. All u need to do it to create in the TC MM01 and u can refer to the table MARA and the material number field is MATNR.
    Coming WRT to the blog when u want to test it either u press F4 to get the list of material avaiable or check in MARA.

  • Total speed for port-channel when config speed 1000 in nexus5548?

    hi ,everyone.
    now i connect cisco 6509 and nexus 5548up using two 1000M link,and i want to binding two link as port-channel,
    because 5548up port is 10GE ,cisco 6509 port is 1GE,i config speed 1000 in the nexus5548 ethernet port ,and i find
    that speed 1000 commade auto config in interface port-channel,so i want to know the total speed in this port-channel
    is 1000M or 2000M when the port-channel speed config as 1000?i appreciate for your help!!
    the topology like this:
                  1000M
    6509      port-channel speed 1000M    nexus5548UP
                  1000M

    hi again
    The speed of the links and portchannel is 1000M but the bandwith of the portchannel is 2000M

  • Transport abt ALE Config

    Hi,
    We have done all IDOC to File scenarios
    We have configured the ALE settings on SAP R/3's DEv server.
    Can i transport these Config to SAP R/3's QTY Server or Should i create them as it is appear in the SAP R/3's DEV server???
    Regards
    Suman

    Hi Suman..
    This was the ALE settings...
    Steps
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2)
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    In SLD – System Landscape Directory
    TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
    Ts for Third Party (Logical system):-
    BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
    BS for Third Party (Logical system):-Enter the XI logical system name.
    In Transaction SALE
    Define and Assign the logical system name.\
    idoc to idoc
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    regards,
    Kishore

  • ALE config & Idocs

    Hi All,
    I have a requirement to Transport Idocs from XI server to ECC-R3 server(Both are Different Servers).
    I need help in creation of Logical Systems, Ports and Partner Profile Creations.
    Before that i have few doubts,
    1. What is the Significance of "Assigning Logical Systems to Client?"
    2. What is the Significance of the "Customer Distribution Models?"
    Now my questions?
    1. How many Logical Systems must i have in ECC-R/3? Do we need to create any LS in XI server?
       similarly how many Ports and Partner profiles i need to create in both ECC and XI servers.
       Actully Inbound Process runs in ECC by using a Process Code(It drives our custom FM).
    Thanks in Advance,
    Sekhar.J

    Hi,
    Lets Take everything One by One:
    1. What is the Significance of "Assigning Logical Systems to Client?"
    *Answer: Logical System is nothing but a Name assigned to a Client for Data Transfer, which will be used as the name of Sender or Reciever System.*
    2. What is the Significance of the "Customer Distribution Models?"
    Answer: CDM is generally required when you have Multiple Recievers for your IDOC, and you want to have ALE/IDOC settings for all Recievers in a central place. You achieve the concept of segment Filtering & IDOC reduction via CDM.
    I need help in creation of Logical Systems, Ports and Partner Profile Creations.
    *Creation of Logical Systems:It can be defined by TX code BD54. Just enter the name and description of LS.
    Creation of Ports: Go to transaction WE21 to create a port which will be used for transferring the data.
    Creation of Partner Profile: use Txn  WE20.*
    Now my questions?
    1. How many Logical Systems must i have in ECC-R/3?
        Only One
    Do we need to create any LS in XI server? No
    similarly how many Ports and Partner profiles i need to create in both ECC and XI servers.
    Only One Port & Partner Profile in XI server.
    Thanks,
    Ajay

  • Setting up Logical system in ALE Config !

    Hi,
        I have set up the ALE logical system in SAP to transfer data. Basically RFC destination setting. While I am trying to test the connection, I am getting an Error Program INBOUNDASYNC not registered.
    Could any one help me out here.
    Thanks,
    Senthil

    Hello,
    Please make sure you have completed the starting of SMD agent also after the setup, u can find it in the guide.
    also check the p4 or Https port number is correctly mentioned.
    The user and pass mostly would be that of SMDadmin, created during the setup, or u can use SIDADM which will wrk fine.
    sometimes root needs to be used as even sidadm can be restricted in ur envt. ( just in case).
    Regards,
    Kaustubh.

  • File port configuration - ALE

    Hi
    We are trying to configure the ALE setup.
    The data should be transferred to the application directory for the other server.
    Have created the file port, but getting the Idoc error 29.
    Please can u tell me the steps..
    Thanks in advance!
    Sushmitha

    Hi,
    IDoc status 29: Missing or incorrect partner profile
    To send an IDoc from the SAP system to the external system, you must define outbound parameters for the message type and all relevant partners.
    For more information, see Interfaces ® External Systems ® Configure Warehouse Management ® Communication R/3 -> External System ® Maintain Partner Profile in the Implementation Guide for Warehouse Management.
    If the system cannot find the partner (that is, the connected partner system) for sending the IDocs, proceed as follows:
    Define the missing partner profile.
    Resend all existing IDocs, which the system has not yet been able to send.
    For this error, the system triggers a workflow work item for the standard task Output: Error processing with IDoc and sends a message to the inbox of the corresponding user.
    You trigger subsequent sending of the IDocs that contained errors from the inbox.
    On subsequent transmission, the incorrect IDoc is flagged with status 31 and copied to a new IDoc, which is enhanced with data from the partner profile and transferred to the asynchronous RFC.
    Check this.
    http://help.sap.com/saphelp_nw70/helpdata/EN/dc/6b7fa443d711d1893e0000e8323c4f/content.htm
    Rhea.
    Edited by: rhea on Oct 13, 2008 4:52 PM

  • Custom IDOCS and ALE config

    Hi All!
    I am extending a basic IDoc and adding custom segments to it.I will be using change pointers to automatically initiate the ALE process when there are changes in the Master document.
    Please anybody give me the process to follow.Is programming necessary for the extended IDoc to retrieve data.If so please guide me with any pseudo code.
    Thanks in advance
    Prasanna Kumar

    Hi
    Choose SAP Menu ® Tools ® Business Communications ® IDoc Basis ® Development ® IDoc types . The IDoc type editor is displayed.
    If you have not already done so, create a transport request for your development objects (extension segments, extension, function exit and so on). You can access the Workbench Organizer from the editor by selecting Requests (Organizer). From there, select Request ® Create and reply to the questions which appear on screen. By selecting you can return to the IDoc type editor.
    Name your extension in accordance with the customer namespace and choose Extension as the development object. Choose .
    The name of your extension should be no more than 8 characters if you wish to use the extension to communicate with partners who are using SAP Releases prior to 4.0. You can only use extension names with more than 8 characters from Release 4.0 onwards.
    Choose one of the following options:
    Create New: Create the extension without a reference.
    Create copy, which you can then change if necessary
    Create as successor: Note that only one successor is allowed per release for each extension.
    Select the basic type which is to be combined with your extension. Confirm your entries.
    The basic type is displayed as a tree structure. See the color legend (Utilities ® Color legend).
    Position the cursor on the segment where you wish to append the extension segments (the reference segment). Choose . You must now assign attributes for these child segments:
    Mandatory segment (indicator): Must data be written to this segment in the IDoc?
    Maximum and minimum frequency of use: How often may/must a segment occur in the IDoc?
    You can add further children or "grandchildren" to this or any other reference segment in the basic type.
    When the new extension is complete, you can save your entry.
    You should keep the following factors in mind when dealing with extensions:
    Segments must not explicitly occur more than once in the IDoc type - this means that the extension cannot have any segments which already exist in the basic type. This also means that a successor must not have any segments which already exist in the predecessor.
    Parent segments of predecessors must remain parent segments in the case of successors.
    Extension segments cannot be created from reference segments using the Cut and Paste functions and vice versa.
    In the example call your extension Z1ORDERS . Append Z1TEST1 child segment to E1EDP19 reference segment in ORDERS01 basic type. The child segment can be used only once.
    regards
    Prashant

  • Problem in ALE config

    Hi all,
    Ihave created 2 logical systems gir800 , gir810 in the same server for the clients 800 and 810,when i am trying to configure ALE while running <b>Generate partner Profile</b>, i am getting the Error
    <b>Port could not be created                               
    RFC destination GIR800 not specified for system GIR800  
    Enter the RFC destination and restart the generation    </b>
    Please let me know what could be the Problem,
    I checked SM59 everything is ok,
    Help me with the solution........................
    Thanks,
    Girish

    Hi Girish Kosuri
    Just follow the procedure
    Sending System(Outbound ALE Process)
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode  BD64 ? Create Model View
    Tcode  BD82 ? Generate partner Profiles & Create Ports
    Tcode  BD64 ? Distribute the Model view
    Message Type MATMAS
    Tcode BD10 ? Send Material Data
    Tcode WE05 ? Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ? Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Create Model View
    Tcode BD82 !V Generate partner Profiles & Create Ports
    Tcode BD64 !V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 !V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 !V Send Material Data
    Tcode WE05 !V Idoc List for watching any Errors
    STEP 1)a Goto Tcode SALE
         Click on Sending & Receiving Systems-->Select Logical Systems
         Here Define Logical Systems---> Click on Execute Button
         go for new entries
         -System Name : ERP000
         -Description : Sending System
            -System Name : ERP800
         -Description : Receiving System
         press Enter & Save
         it will ask Request
         if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
         Select Assign Client to Logical Systems-->Execute
         000--> Double click on this
         Give the following Information
         -Client : ERP 000
         -City :
         -Logical System
         -Currency
         -Client role
         Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
         Click on Create Button
         RFC Destination Name should be same as partner's logical system name and case sensitive
         to create the ports automatically while generating the partner profiles
         give the information for required fields
         RFC Destination : ERP800
         Connection type: 3
         Description
         Target Host : ERP000
         System No:000
         lan : EN
         Client : 800
         User : Login User Name
         Password:
         save this & Test it & RemortLogin
    STEP 3) Goto Tcode BD64 -- click on Change mode button
           click on create moduleview
         short text : xxxxxxxxxxxxxx
         Technical Neme : MODEL_ALV
         save this & Press ok
         select your just created modelview Name :'MODEL_ALV'.
         goto add message type
         Model Name : MODEL_ALV
         sender : ERP000
         Receiver : ERP800
         Message type :MATMAS
         save & Press Enter
    STEP 4) Goto Tcode BD82
         Give Model View : MODEL_ALV
         Partner system : ERP800
         execute this by press F8 Button
         it will gives you sending system port No :A000000015(Like)
    STEP 5) Goto Tcode BD64
         select the modelview
         goto >edit>modelview-->distribute
         press ok & Press enter
    STEP 6) goto Tcode : BD10 for Material sending
         Material : mat_001
         Message Type : MATMAS
         Logical System : ERP800
         and Execute
    STEP 7)goto Tcode : BD11 for Material Receiving
         Material : 100-300
         Message Type : MATMAS
         and Execute --> 1 request idoc created for message type Matmas
         press enter
         Here Master Idoc set for Messge type MATMAS-->press Enter
         1 Communication Idoc generated for Message Type
         this is your IDOC
    Good luck and Reward me for the same
    Thanks
    Ashok.N

  • Small Doubt in ALE config

    Hi,
    Iam reffering this blog to do ALE settings
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    If i completly follow this Blog means ,  Is there is any need to do in WE20 & WE21 entries ????
    Instead of doing through this blog can i do in this way....
    1) Create LS in SALE
    2) Create RFC Destination in SM59 with the above created LS name
    3) Create WE21 Port
    4) Create We20 Partner Profile
    Is this way is ok rather than going in the Above mentioned Blog.
    What is the difference between these Two Approches
    Regards

    Hi Vamasi,
    After creating distribution model, you can generate partner profile automatically by just one single push button. It avoids our manual process of creating partener profile.
    However you can create partner profile manually as well using WE20 / WE21. But in both cases you need distribution model if you want to send message to XI system.
    "Generate the partner profiles by selecting the navigation path from the main menu, Environment --> Generate Partner profiles " --> Will make life easier by auto. generating profile for you base on distribution model parameter. ( Just one click n everything would be done).
    Both are doing same thing.
    Hope this will ans. your query.
    Thanks,
    Nilesh

  • ALE Config Problem

    Hi Guru
    I have two SAP System ,
    1. MOP client (100)  and 2. PQR Client (200)
    MOP system sending Idoc to PQR. There is no Idoc is flowing from PQR to MOP.
    Now my Question is
    In PQR system  Config Require
    In defined Logical System  PQR in PQR System
    now in Assignment part of Logical system
    I need to assign PQR to client 100 or Clent 200 ?
    Regards
    RJ

    200.
    Your partner profile in the MOP system will have an outbound LS partner representing your PQR/200 system.  This name will match the setting you made in BD54 for your logical system.  The message type that you add to the profile will point to a receiver port which has an RFC destination assigned.  The RFC destination will point to your PQR/200 system.

Maybe you are looking for

  • K8N Neo4 Platinum random lock-ups and BSOD

    I built a new PC about 3 months ago and from day 1 it has always locked up / frozen at random intervals. Sometimes it also BSOD's with a Machine Check Exception. Seems to lock up / freeze more often when have multifple windows open eg. Multiple IE ru

  • ITunes shuts down when trying to import from CD

    I have changed every setting and gone through every help file and uninstalled/reinstalled, etc and no matter what I do, when I try to import songs from a CD to iTunes, I get the message that iTunes has encountered an error and will be shut down at wh

  • Problems with a waking up a labview executable after computer hibernation?

    I am just wondering if anyone has had any problems with waking up a labview executable after hibernating a computer.  The executable was running before the computer was hibernated and it seems to have frozen not crashed after the computer was woken u

  • Select button will not work

    My 2gb nano's select button will suddenly not work. The rest of the clickwheel and buttons work find, but not the center select button. I restored it to original settings. Then after it restarts, you have to select a language. The select button would

  • Content level settings in fact LTS

    Hi all, i just want to get very clear picture upon content level settings of LTS, when we create a dimensional hierarchy say time hierarchy (Year, Quarter, Month, Day), when we want a measure to sum up to month level we go to that particular measure