Transporting Process Chain - error Source system does not exist
Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks
Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
Example:
Source BW with source system AAA.
Target BW with source system BBB where the source system AAA
corresponds to the source system BBB.
Entry in RSLOGSYSMAP in the target BW:
Original source system: AAA, target source system: BBB.
Give the DDIC user in the source BW in client 000 the
authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh
Similar Messages
-
After transporting I get error "source system does not exist"
Hello all,
I have transported my objetcs to BW quality system and transported the data sources to r/3 quality and everything went fine. But now when I am trying to go through everything my update rules are inactive and when I get to infosource it gives me this error
"Source system ERJ100 does not exist."
Is there any importamnt step that I am missing why are the objects not recognizing the source system?
Thanks,hi,
check the system mapping in rsal tools system mapping tab as lilly mention. check if the mapping is defined correct. see the link below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Might help
Thank you
Qandeel -
Transport Error: Source system does not exist. Message no. RSAR203
Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PMHi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh -
Transport Request got failed due to Source system does not Exist
Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
VenDear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM -
Source system restore - Source system does not exist
Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashishI get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again. -
Source System Does Not Exist - Transport Problem
Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300 is R3 DEV
LRQCLNT700 is R3 QA
LBDCLNT100 is BW DEV
LBQCLNT700 is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System Target System
LBDCLNT100 (BW Dev) LBQCLNT700 (BW QA)
LRDCLNT300 (R3 Dev) LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.Thanks Edwin
I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA. -
Source system does not exist (RSAR203)
Hi to all
I have a error in phase XPRA_EXECUTION in BI_CONT 704 add-on upgrade by SAINT transaction.
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Modo de entrega)
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
The errors affect the following components:
BW-WHM (Warehouse Management)
I read the thread
XPRA_EXECUTION error in BI_CONT 703 patching
but don't work for me.
The sap Note 1271454 does not work for me becouse I already aply the SP.
SAP_ABA 701 0007 SAPKA70107 Cross-Application Component
SAP_BASIS 701 0007 SAPKB70107 SAP Basis Component
PI_BASIS 701 0007 SAPK-70107INPIBASIS Basis Plug-In
SAP_BW 701 0007 SAPKW70107 SAP Business Warehouse
BI_CONT 703 0003 SAPKIBIIP3 Business Intelligence Content
I upgrede add-on BI_CONT to 704 SP 08, for this the SAINT aply patch SAPKIBIIO4 TO SAPKIBIIO9 (prerrequisite)
The error appear in SAPKIBIIP6
Any suggestions?
Many thanks and best regards
William NeiraHi,
Had you checked the SAP Note " Note 955647 - BI_CONT 703:Information on Add-On Support Packages".
Seems like SAP has released two support pack
SAPKIBIIP6..........AOP 24.07.2007
SAPKIBIIP6 updated..AOP 07.08.2007........955647
and recommends to apply the Support pack released on 07.08.2007. Kindly check and update.
Regards
Valavan.SM -
Cannot make changes t oDTP - Source system does not exist
Hi,
I cannot open my DTP to make changes. when I tried to double click I got this error
Source system X01CLNT001 does not exist
Message no. RSAR203
I have tried connection test from SM59 and there seems to be no problem.
How do I resolve this?
thanksGoto RSA1 --> Source System --> right click --> Check.
Is it giving any error?
You can click on restore also and check if anything improves.
Also check whether datasource and transformation is active.
Edited by: Pravender on May 28, 2010 12:11 PM -
Transport issue - Source system does not exist
Hi at all!
I've got a problem after transport from BW QA-system (EBW) to BW PRD-system (PBW). All transports got the same error message, that the Source System DEV500 doesn't exist. But DEV500 is the development R/3 system. How could it be? Because we didn't connect the DEV500 to PBW. We connected PRDCLNT100 (Productive R/3) to PBW. Where is the failure?
Thanks in advance for your help.
ChristofHi,
DEV R/3 -
> QA R/3 -
> PROD R/3
DEV BIW -
> QA BIW -
> PROD BIW
Is the above one is your landscape? If so , you must had created the Transport requests in DEV BIW and imported them into QA BIW. And for that you had maintained the source system conversions in QA ABIW .
Now you want to import into PROD BIW. And remember that the orgin(source) of the trnasport requests is DEV BIW. So you need to maintain the Conversions in PROD BIW for conversion from DEV R/3 to PROD R/3.
With rgds,
Anilk Kumar Sharma. P -
Hi all,
When i run an infopackage its getting failed throwing out an error
"An error occurred in the source system.
System Response
Caller 09 contains an error message."
I have replicated the Data source and when i try activating it i am getting the following errors
"Inconsistent user object XXXXXXX "
"Error saving DataSource "
"DataSource XXXXX could not be activated"
Help me out
Regards,
MADhuHi,
Might be some issue in Data Source when you replicating it in BW system.
Check RFC connections between the Source and Target.
Could you mention the error message clearly.
Reg
Pra -
Distribution manager failed to process package - the source directory does not exist
Hi,
I have the following behaviour:
A Software Update Deployment Package is not distributing because of the following error:
I have found the following query (http://blogs.technet.com/b/ken_brumfield/archive/2013/01/10/troubleshooting-sccm-software-update-deployment-package-distribution-due-to-missing-directories.aspx) to
determine which update is missing.
It is about update KB978601. If we search this update in the console, we see this:
The update is not required, not downloaded, not deployed and superseeded.
If we look into the members of the Update deployment package, we can't find this update.
When I was digging into the database, I found this:
SELECT
distinct cp.Content_ID,
cp.ContentSubFolder,cp.PkgID,
con.ContentProvisioned
FROM
[dbo].[vCI_ContentPackages] cp
INNER
JOIN [dbo].[CI_ConfigurationItemContents]cic
ON cp.Content_ID
= cic.Content_ID
inner
join dbo.v_CIContents_All
con on con.Content_ID
= cp.Content_ID
where cp.PkgID
=
'XXX002BA'
and cp.ContentSubFolder
=
'39b46f0a-7244-48a6-b795-119ac74009f9'
which resulted in:
Content_ID ContentSubFolder PkgID ContentProvisioned
16828355 39b46f0a-7244-48a6-b795-119ac74009f9 BP1002BA 1
I found the "ContentProvisioned = 1 " a little bit strange.
So, my question is:
Why SCCM is thinking of distributing the content although it is not downloaded or deployed and how can we fix this?
Has it something todo with the "ContentProvisioned" or is it something else?
Thanks,
SemI can tell you why CM wants to distribute it, but the easiest way would be downloading that patch thus adding it to the package (so that it can be distributed) and remove it afterwards.
Torsten Meringer | http://www.mssccmfaq.de -
I'm using FB4 under OSX and for the longest time it refused to load and just displayed errors instead of panes. Nothing that I could find would fix it (including reinstalling). Well, it looks like that problem has been resolved in some update, because it has gone away, and I can go back to viewing projects.
The problem is now when I try to build the project I get the error:
Source locator does not exist: com.adobe.flexbuilder.debug.sourceLookupDirector.flash
Any ideas? My familiarity of eclipse is pretty limited and I don't know what a source locator is. TIA.Hi,
Looks like those classes are missing from your Flash Builder installation.
Can you check in installdir/plugins/com.adobe.flexbuilder.debug.xxx/com/adobe/flexbuilder/debug/
If those files are missing, do a complete uninstall and then install. -
Trigger Process Chain from Source System into Target System
Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.
>
FluffyToffee wrote:
> Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.
Hi Fluffy,
Check RFC connection between the two sysems.
Try using remote process chain process type in the process chain. the fllowing link may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Regards,
sunmit. -
Data source 80BP_ID does not exists in source system
Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
RohitHi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth -
Dispatcher process on ABAP + JAVA system does not start.
Hi all,
Dispatcher process on ABAP + JAVA system does not start.
Can someone help me to solve this issue in a ABAP+JAVA stack system?
service p4 ================= ERROR =================
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
[Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
Nov 9, 2011 6:41:09 AM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
service p4 failed. J2EE Engine cannot be started.
Please let me know if you need any further information in this regard.
with regards,
RajaHi,
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
Please reboot the server to free up occupied ports. Later start the sap system.
Regards,
Deepak kori
Maybe you are looking for
-
No Data Found: Exception in SQL inside PL/SQL block
Hi Friends I am trying to execute an SQL SELECT stmt inside a PL/SQL block. But when i execute the procedure, it gives me No Data Found Exception. I know it is because no row is fetched in the query, but the condition of the SELECT query i have speci
-
When I use the above media query in my stylesheet Live View ceases to update the viewport. I have to update it manually each time I add or change a style. This is not the case when I use styles under a common tablet sized query @media only screen a
-
I want to buy Adobe Creative Suite 6 Master Collection Chinese version,but Flash Builder is English version in it, May I change this software to Chinese version?
-
I have a powerbook g4|800 mHz, a adsl connection to internet connected to a wireless smc network wich is plug to a imac which dont have a airport card. So fare i could use my imac (via ethernet) and my power book G4 (via airport) with no trouble, alw
-
How to work with two blocks in one form
i need help,i moved the control from block(abc) to another block(xyz) using go_block('xyz') and then i insert record to block(abc) but the record is not inserted to the table . i used previous_block but it is not working how to use it.