Transporting Quick veiwer

hi,
I have created a report using QUICK VIEWER and assigned a T.CODE, it is working fine but how do i transport it to production server.
-> When I create using SQVI it is not asking for a package or the request no.
-> I am unable to assign the report into a request, It is not at all appearing in the program list.
please help me.
points assured.
regards,
Prabhu

hi,
check this thread...
Creating transport request for SQVI
Cheers
Alfred

Similar Messages

Unsupported Transport 461 = Inability to Play Video Clips

My QuickTime upgrade has turned out to be a major WasteOTime. It will play anything except the video clip off NPR (Human Voice Shattering Glass...) I'm trying to play. All I see when I attempt to open the file is the lower part of the QuickTime player, the words "unsupported transport" quickly scroll by and the number "461" settles into the info bar. "461" is the QuickTime error code for "unsupported transport." That seems to have something to do with my firewall, and Quicktime's recommended "fix" is to go to the Quicktime Preferences and under "Advanced" set Transport Setup Protocol to HTTP. I did all that and the same thing happens all over again. Yet if I go to the QuickTime site and try to play one of their clips there, no problem. It's also frustrating that no one else in the Apple community seems to have ever encountered this problem with Quicktime, which seems highly unlikely. Any suggestions?
G-4 PowerBook Mac OS X (10.4.9)

Here is the URL: http://www.npr.org/templates/story/story.php?storyId=10255528
I was able to take a look at this NPR video clip using a newly downloaded and installed version of Real Player. I will have to try the "repair permissions and restart" option down the line, but I have no doubt it will work. For whatever reason I still need to be reminded of such critical details. Thank you for that reminder!
G-4 PowerBook Mac OS X (10.2.x)
G-4 PowerBook Mac OS X (10.2.x)

Program of abap query

Hello experts ,
I have program with this name : 'AQZZTAD-MM======VENDORS======='.
I want to see this query in transaction SQ01 , how can i see this query , if i don't know what is the name of this query and i don't know what is the name of the infoset ?
Thanks for the help.
AVI.

Hi
Please find the Link below
[Abap Query|Re: sq01 quick veiwer to query]
[Query|Re: ABAP query]
Hope this will be help full
Thanks
Kalyan

Document cannot be opened from iCloud

I seem to be having an issue with documents saved in iCloud.
Thing is its not every document & it seems to be random.
I use Pages for all of my invoicing & quotes & i always save them in iCloud so i have access on my iPad & iPhone as well as my Mac
I have today finished a quote & an invoice both from the Pages app on my Macbook Pro which i saved into iCloud as i always do
This was a couple of hours ago i have just tried to open the invoice on my iPad & i get a message "Document Can't be opened" i also get this mesage on my iPhone too
On my Mac in the pages app i now get "********* invoice" could'nt be opened
I have now also tried to open this from iCloud.com also but i now get this
Thing is i have the latest version of Pages installed on all my devices.
I have printed a copy of this when i wrote the invoice but i now need to add something to it & e mail it to the customer.
The only way to do this now is to rewrite the whole invoice as i cannot open it at all on any device, I have noticed that i can quick veiw them from the iCloud folder from within the app but the documents that now wont open i cannot ive also just tried to use the open recent from the file menu the document now has added -tef to the end of the title this cold be relevant.
As you can imagine i really could do with finding a way to get back recover or just be able to open the documents this has affected.
Any help here guys would be greatly appreciated
Thank you

My girlfriend's sister is having the same problem. We managed to get the pages file onto a PC to have a look and it's a folder called "name.pages-tef"
Inside the folder are the following:
If I open the index.db file with a text editor, I can see the text but it's surrounded by gobbledygook code.
Any help would be much appreciated as it's 3 months worth of notes apparently. If you try and share it as Pages file, PDF or Word from the Pages app on iPad where it is or from iCloud, it fails. Literally just need to be able to print this so she can get her notes back.

Creating a cloum in ABAP QUERY

I need modify an existing ABAP QUERY REPORT.
I have user group and Report name.
I am using SQ03 T-CODE.
1) How can I add a colum for this report. this colum to be added between two existing columns.
2)I need to add two fields in selection screen. How can I add them?
3)How can I modify the existing query by adding more conditions with two fields included on the selection screen
please help me.

Dear do these steps.
1. Open SQ01
2, enter your query name.
3. Press Quick Veiwer button.
4. in new opened , enter change.
5. in the left side you have all tables joined , select new field from here to be added.
6.go to tab list fld. selected
select row where you want to insert your field and enter the same here
7. go to selection field tab
8. from possible selection fields insert new selection parameter.
9. save and see the output.
reward if useful.
Amit Singla

Compiler crash Forms 6i

Hi,
I have a problem with Forms developer 6i. I have a very big form 2.3 MB, and then I added some extra lines of code ( and there are no errors in them ), and when I try to recompile the fmb now it crashes the whole forms developer program !
I think I hit maximum compilesize for fmb's or something - but then again can that really be true ?
Have anyone experienced similar problems ? and does a solution exist.
PS - I tried to add the lines again from the functioning fmb and same thing happened again and again at roughly the same point - around 2.3 MB
Kind regards
Bo Normann

First of all, the last two posts are implying that the runform session is crashing. Please note that the original post is talking about the Forms Builder crashing.
I couldn't understand the logic behind 'Finding and Replacing' a semicolon with a semicolon through out the form.If you compile a form, you will notice in the Object Navigator, that each program unit has a '+' by them that you can click and see more options. If you open the source of the program unit, at the bottom of the editor window it says Not Modified . . . Sucessfully Compiled. If you save the form, close it, and re-open it, the program unit still has this compiled indicator.
If you change anything in the program editor, the compiled indicator disappears. If you save the form without compiling, and reopen it, it is still NOT compiled.
All you are doing by changing semicolon to semicolon is forcing every trigger and procedure to become uncompiled. And then if you save the form in this state and check the fmb size, you will notice a much smaller fmb size. You will notice when you open such a form in the Builder, the open is faster, and the first compile is slower (just like doing a shift-ctrl-K compile-all). On the other hand, a form saved with all compiled code opens slower, but first compile is fast. Apparently when Oracle opens a pre-compiled fmb, it tries to verify the compiled program units.
However, these compiled program units cause problems -- we have had problems using pre-compiled fmb's transported to different environments failing in stored-procedure calls and other places. Doing a compile-all (shift-ctrl-K) clears the problem.
The bottom line is this: Storing compiled code inside an fmb does no good. Oracle has been doing it from the beginning of client/server forms, along with storing a copy of the color palette, too. In BOTH situations, this has caused issues with forms, especially when moved from one environment to another. In my workplace, we make SURE we always store production forms WITHOUT the compiled code. They transport quicker due to smaller file size, and they compile cleaner in the users environments.

Im trying to veiw messages that was sent to me but it was over 3 months ago?, im wondering if there is a quicker way then to keep pressin "load earlier messages?

im trying to veiw messages that was sent to me but it was over 3 months ago?, im wondering if there is a quicker way then to keep pressing "load earlier messages?

no

Quick question on conversion of source system after transport.

hello all,
I have transported all my objects from dev to QA in BW (and same in r/3). Now i want to let it all go to production environment. So do I have to go in rsa1 of BW prod system and make a entry in there ?
In my BWQAS i have an entry in there
Original source system Target source system
R3DCLNT100 R3QCLNT100.
So when i make the entry in BW prod environment what should be source system R3D or R3Q?
Thanks,
Raj

It must be R3D (dev system)
Something like following should be maintained in production
R3DCLNT100 <u>R3PCLNT100</u> [Assuming R3PCLNT100 is your production system]
Don't forget to assign points,
-jayant

IpSec in transport mode not completeing phase 2 quick mode

I am trying to connect Solaris 10 to a non Solaris box over IPsec. I know this box has worked with a windows machine running ipsec.
My configuration of ipsec and ike looks to be correct but I must be missing something.
If I turn the ikeadm traces I see that I get through the phase 1 main mode but can not establish quick mode.
I have to use 3des for encryption and sha1 for authentic ion. I have followed the steps in the Solaris 10 ipsec and ike manual but I don't know where to turn now.
This are the ikeadm traces
Wed 20 Jul 2005 12:05:21 BST: in.iked: Quick Mode negotiation failed: code 14 (No proposal chosen).
Wed 20 Jul 2005 12:05:21 BST: in.iked: local_ip = 172.18.10.1, remote_ip = 192.168.25.22,
Wed 20 Jul 2005 12:05:21 BST: in.iked: local_i_id = ipv4(tcp:0,[0..3]=192.168.25.22), local_r_id = No Id,
Wed 20 Jul 2005 12:05:21 BST: in.iked: remote_i_id = ipv4(tcp:2126,[0..3]=172.18.10.1), remote_r_id = No Id,
Wed 20 Jul 2005 12:05:21 BST: in.iked: spsi: ike_send_packet -1
Wed 20 Jul 2005 12:05:21 BST: in.iked: In ssh_policy_phase_ii_sa_freed.
Wed 20 Jul 2005 12:05:21 BST: in.iked: local_ip = 172.18.10.1, remote_ip = 192.168.25.22,
Wed 20 Jul 2005 12:05:21 BST: in.iked: spsi: ike_udp_callback_common -1
Wed 20 Jul 2005 12:05:21 BST: in.iked: In ssh_policy_new_connection_phase_qm (pm_info = 0x85938).
Wed 20 Jul 2005 12:05:21 BST: in.iked: In ssh_policy_qm_select_sa (pm_info = 0x85938).
Wed 20 Jul 2005 12:05:21 BST: in.iked: Number of sas is 1.
Wed 20 Jul 2005 12:05:21 BST: in.iked: pfkey_request: queueing seq 598 type 12/X_INVERSE_ACQUIRE satype 0/UNSPEC
Wed 20 Jul 2005 12:05:21 BST: in.iked: tx_req: posting seq 598 type 12/X_INVERSE_ACQUIRE satype 0/UNSPEC
Wed 20 Jul 2005 12:05:21 BST: in.iked: pf_key_handler: got pid 1242 seq 598 type
6/ACQUIRE sa 0/UNSPEC errno 0 diag 0/No diagnostic len 109
Wed 20 Jul 2005 12:05:21 BST: in.iked: handle_reply: got seq 598 type 6/ACQUIREsatype 0/UNSPEC
Wed 20 Jul 2005 12:05:21 BST: in.iked: SA #0.
Wed 20 Jul 2005 12:05:21 BST: in.iked: Number of proposals = 1.
Wed 20 Jul 2005 12:05:21 BST: in.iked: Proposal 0.
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 0 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 1 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 2 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 3 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 4 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 5 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 6 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 7 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 8 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: ecomb 9 lost
Wed 20 Jul 2005 12:05:21 BST: in.iked: no matching ecomb
Wed 20 Jul 2005 12:05:21 BST: in.iked: No winner.
Wed 20 Jul 2005 12:05:21 BST: in.iked: finish_qm_select_sa: invoked for 85018
Wed 20 Jul 2005 12:05:21 BST: in.iked: Quick Mode negotiation failed: code 14 (No proposal chosen).
Wed 20 Jul 2005 12:05:21 BST: in.iked: local_ip = 172.18.10.1, remote_ip = 192.1
My config file
# more config
local_id_type IP
p1_lifetime_secs 28800
p1_nonce_len 20
p1_xform {auth_method preshared oakley_group 2 auth_alg sha1 encr_alg 3des}
p2_pfs 0
p2_lifetime_secs 10800
label "cmts1"
local_addr 172.18.10.1
remote_addr 192.168.25.22
I have also set up the ike.preshared file with my preshared key
When I do a ikeadm dump preshared I see the correct key
Any suggestions
penright

Eeesh. I wish I'd signed up for SDN earlier.
I know I'm a year late in replying, but the peer is proposing something in Quick Mode
(Phase 2) that your Solaris box doesn't think is available. Given the combinations
you had (0-9), I'd be interested to know what the peer proposed that didn't match.
You don't mention what ipsecconf(1m) input is, nor what the peer is configured to
do. You say 3des + sha1 - so that should be one of the choices.
One common mistake is to use "auth_algs" in ipsecconf(1m) (which is AH) instead
of "encr_auth_algs" (which is ESP's hash).

Quick Redo Transport Services question

Hey All,
I'm just testing Data Guard out for the first time. To make sure I understand this properly, physical archive logs are not copied from the primary to standby (LGWR or ARCH). Rather, the redo is copied into the online standby redo logs, and then the standby archives them when switches occur (which would be when the primary does a switch). Is this correct?
Thanks!

Hi
It depends how you have configured your data guard set-up, assuming you have created standby redo logs then yes this is roughly what will happen.
Have you read: http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm#i1033862 ? It does explain all of this.
Thanks
Paul

Error while transporting the transfermactions

hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.

Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM

NWDS 7.0 Error during Quick PAR Upload and while trying Exporting PAR-File

Hello,
I am trying to use the functions "Export as PAR-File" and "Quick PAR Upload" in NWDS 7.0.
Unfortunately I got an error every time when I am trying to use this functions. I am using the package explorer in the Java perspectiv in NWDS for starting this functions. The error tells me the following:
"Unable to connect to the Portal"
"Operation failed: Please make sure the server "XY" is running or check the log (sap-plugin.log) for more detail"
Thats all.
When I am looking in the log-file I can read the following messages:
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: GET_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: IS_VIEW_EXISTS:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: SIZE_OF_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: READ_ENTRY:ALL]"
LOGIN.ERROR|null|| Login Method=[default] UserID=[user_Admin] IP Address=[192.168.xxx] Reason=[Cannot authenticate the user]
I have tried this with several users and their passwords. All of the users have admin-rights at least in the portal. One of them even in the SDM.
I can sucessfully deploy webdynpros from NWDS into the same Portal with this users.
We are using SAP Logon Tickets and SSO is configured working fine between Portal and backend.
We have imported Key Store File in NWDS unter Window --> Preferences --> Java Development Infrastructure.
And we are not using the NWDI.
Who knows why I cannot even export par-files? Are their any configurations missing?
Best regards,
Iris

It is mentioning about authentication.
check whether you have access to deploy directly or not ? maybe direct deployment into portal disabled .
I think you have to follow the procedure of checkout and activate procedure.
Can you clarify few things
1) Are you using NWDI Based Transports in your landscape?
Login Method=default UserID=user_Admin IP Address=http://192.168.xxx Reason=Cannot authenticate the user
http://192.168.xxx is it your development portal?
Did you clarify with admin people whether direct deployment disabled?
Koti Redd

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Open Transport with Dial-up and System 8.5

Hello,
I'm looking for definitive information on Open Transport. I have a CD service manual but their information is vague.
I'm trying to configure a 6214CD Performa with OS 8.5 and dial-up. I've had the machine on dial-up with Config PPP for a long time with 7.5.3, however, after a clean, full install of 8.5, I can't get conntected.
Config PPP "appears" to connect, but I don't believe it really is connected. From all my reading it appears that one MUST use Open Transport after 7.5.3, but I have never been able to find enough detailed information to do so.
Am I correct in that there is no actual OPEN TRANSPORT Control Panel? With the new 8.5, I no longer see Network Software Selector.
The CD service manual says the Mac OS "hides the Classis appletalk files (Network and MacTCP) by making them invisible.
I do have TCP/IP. I've used Macs for 15 years and have tried and tried but never could find good info to work within OPEN TRANSPORT. I'm willing to read and read if someone can direct me to good data,
thanks
Lowell

Lowell,
I use apple + shift + 4 because it allows me to crop for just the two windows that I want. Having caps lock down will give you a bullet instead of cross hairs and captures just the window that you click on. Because TCP and Remote Access are two windows, screen capture w/ caps lock does not do the trick and a full screen capture is more than I need.
When I tutor seniors, I always wonder what their configuration was before their machine quit on them. I have to work from scratch. By taking the screen shot after configuring their computer, I can help them over the phone becuase they have a picture of what settings need to be. It saves me a lot of time explaining!
As for a small, simple program, I am afraid to say that Filemaker Plus from 1985 has served me so well over the years that I have not explored every new gadget software that has come out since. I bought one such gadget program from New Zealand more than a decade ago and was disappointed when it did less than Filemaker with more trouble, not less.
Filemaker 2.1 has 98% of the features I ever use. If you take a screen shot, paste it into a Filemaker layout and then draw text fields over the top, you get WYSIWYG capabilities. You can select the picture and designate it as a non-printing item so that you see the form on the screen but do not print a screen form onto an actual preprinted form.
There are a few OCR programs that let you scan a form and then create text fields over the top for converting forms into a database. The form is essentially the same as a screen shot at that point. Those programs are good for quick formatting while scanning into text but Filemaker is still faster for me because I was fortunate enough to start using it 21 years ago.
Jim

Avid MC Transport Control Surface now working in CS 5.5

Not sure if anyone is interested, but because Adobe doesn't have a EUCON integrated support, it greatly limits the control surfaces that can be used with it.
I googled a bunch of different things but in the end it seems like the general conclusion was that the MC Transport doesn't work with Premiere Pro, not a big deal if you don't have one, but really sucks if you do have one and use Premiere for a lot of your work.
However, following the age-old adage of "never say die" I finally figured out a work-around that has my Avid MC Transport working pretty darn good with Adobe Premiere CS 5.5 on my Mac.
I posted it here: on creative cow where you can see the whole thread: http://forums.creativecow.net/readpost/3/911511
Hi Andree,
I had the same problem but figured it out, you can see it here http://wp.me/p1hbRg-e
or I'll paste it here for you as well:
I recently made the switch from PC to MAC for the long-form documentary I'm making. A decision that so far, I definitely regret. But more on that later.
For the moment I thought I'd start posting notes about problems I've run into and solutions to them that I've found in case any one else runs into these same problems.
I purchased the Avid/Euphonix MC Transport for use in my editing as having a jog/shuttle definitely speeds things up remarkably once you are accustomed to them.
However I didn't notice that Adobe Premiere was not supported and this is my editing program of choice although I do have FCP and Media Composer 5.52.
I googled around and even contacted Euphonix/Avid support and no one seemed to have a solution.
In frustration I then ordered a Contour Shuttle Pro v2 (which is sort of like downsizing from a Porche to a Honda. Both great cars, but which one would you kick out of bed first? Exactly.)
So while waiting for international shipping I tried a bit of a wild idea and I installed the drivers for both the Bella Pro Premiere keyboard (which I don't have) and the Contour Shuttle (which I don't have either) and then began customizing the MC Transport commands to match the command keys in Adobe Premiere.
As a note; you might not need to do this on your system. I'm using a Mac 12 core and this workaround only worked once I installed those drivers but logically speaking you shouldn't need to do it.
And hey! It works!!!!
Some things aren't as perfect as they are in Avid or FCP such as the shuttle wheel shifting to different speeds smoothly. But damn! The jog wheel works perfectly.
Customizing the Soft Keys just involves ensuring that Adobe Premiere Pro CS 5.5 is open and then choosing the soft key around the wheel and once it is highlighted in the EUCON controller, then assigning a KEY command.
For example your center three keys above the jog wheel should have J, K, and L assigned accordingly.
And however you wish to customize it after that. I use for cutting at timeline (CTRL + K), next edit (page down), previous edit (page up) and it is working like a charm.
All the other soft keys including shift command respond the same.
To program the jog wheel. Select it and choose Command, select Wheel from the drop down, then select jog right and choose special command and pick "right arrow" and then repeat for select jog left and choose special command and choose "left arrow."
The shuttle you have to choose the shuttle and again add a wheel command and then in choose shuttle and create a new shuttle wheel command. Then from shuttle drop down, choose for Section 0 add key and set it to K (stop), then for Shuttle Section 1 add L key once and for each shuttle section add one more L key. Shuttle section 7 has LLLLLLL assigned to it.
For the shuttle -1 Section choose J and for each minus section following that add one more J.
It's not perfect but it certainly does what I need it to do!
Hope that helps anyone else out there.
Best,
Darius

Thanks Pepe, seems to be a quick workaround! (FWIW in Logic 7.1, the command I see is Logic→Preferences→Control Surfaces→Rebuild Defaults. I assume that's what you're referring to.)
It'd be great if Apple/Tascam fixed this, but it only takes a second to rebuild the devices, so it's no biggie.

Transporting Quick veiwer

Similar Messages

Maybe you are looking for