Transporting request problem

Hi experts,
I have a peculiar problem. I created a datbase table A and modifed a table B in DEV. The table A was cleared in testing , qa and the transport was released to prodcution. Unfortunately that request also had the modifications made to an another table B which were not finalised and the fn group of maintenance genrator of table B was deleted. Now we are not able to maintain table B in prodcution. Anyone have ideas regarding this. Plz help .

dear Anirvesh,
try regenerate the table maintenance generator in DEV server,
then check whether the object is complete in SE10 ,
if not, open the related function in SE80 and edit all included objects,
then transport the whole objects of table maintenance function to production.
It is suggested to always check the transport request object by using SE10 before transport it to production .
Rgds,
TSWINEDYA

Similar Messages

Transport request problem

Hi all,
when releasing the transport request from developement client subrequest is released properly but when released the main request getting the error
" Test call of transport control program (tp) ended with return code 0232
    Message no. TK094
Diagnosis
    Your transport request could not be exported, since all requirements
    were not fulfilled.
    Calling the transport control program tp
       "tp EXPCHK DEVK904964 pf=/usr/sap/trans/bin/TP_DOMAIN_PRD.PFL
    -Dtransdir=/usr/sap/tr"
    which checks the export requirements, returned the following
    information:
    Return code from tp:    0232
    Error text from tp:     ERROR: Connect to DEV failed (20071030084950,
    prob "
can anyone suggest about this.
thanks in advance .
sk.

Hi SK,
As the transport log itself saying that the connection to development failed. There may be some connection issue in STMS. Ask your basis if there is any problem.
Regards,
Atish

Transport request problem with a ztable

Hello,
I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
Error message is "task desk900213 belongs to a different category"
Thanks.

Hi Alberto,
What type of request are you using. Also let me know the classification of task.
I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
I guess this is related to the thread:
Re: change object transport order
Also I hope you have assigned a development class to the Z table.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

Transport request problem with an include prog ... not working

Hello people I am in a predicament here. I have this SAP Enhancment program with a screen and include code
screen:
SAPLITO01080_XUSR1080_SAPLXTOB1000
include:
ZXTOBI01
right now it can be found either in the function grp XTOB or a project made by us (can be found in CMOD).
When I released the Transport Request with both of the above included. The screen SAPLITO01080_XUSR1080_SAPLXTOB1000 was sent to the prd server but the include code ZXTOBI01 didnt. I tried saving and creating a transport while editing it in XTOB and my project (ZPMTECH), and it still wont work. If any of you can give me some help regaring this I would be ever greatful. Thanks guys and take care.

"Try to see the code of your user exit in PROD, it seems the statament INCLUDE ZX...... is missing."
This is in DEV: In the SAP Enhancments ZPMTECH, the thing is here is that my enhancment comes from a screen. So I just add modules and click on the module and created an enhancment. the include code cannot be seen in ZPMTECH but it can be seen in the function XTOB. However in PRD XTOB does not have the include program nor the modules, but has the screen.
"In your request there should be only the include, not function (user-exit)."
That is how I have transporting it, still doesnt work unfortunatley.
Thanks.

Problem of calling BAPI to release transport request

Dear Friends,
I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work.
BTW, you can refer table E070.
Could you please kindly give me some idea to solve this problem?
Thank you in advance.
Best regards,
Nick

Dear Li Nick,
The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
Regards, Tino

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Problem when creating a transport request

Hello
I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
"Extended transport control is not active: Cannot specify target client
Msg.nr.TR067
Diagnosis
Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
Target group
R/3 System without specifying a client
Procedure
Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
The simplest way of doing this is to use F4."
When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
"BR3 is not a consolidation target
Msg.nr TK658
Diagnosis
Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
If you use extended transport control, you also need to specify a configured target client.
If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
Procedure
Choose a configured transport target, or change the transport route configuration in the Transport Management System.
What to do?

Hi Jan,
Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
Also check whether your transport group is configured properly
regards,
Jai

Problem with the transport request

A request was released to Prod.
In D and Q the request is success but in P it shows one error..
so, we tried to create a new request and copy the objects from the old one.
but v r gettiing the objects not below the task(in req) but below the req..
so it is not possible for me to release it.
I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

Hi,
In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
this is the problem what exactly we are getting. Please clarify..
Thansk!!!

Problem with "Create Transport Request"

Hi all,
Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
Thank in advance
giovanni

Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
Note 807228 can be useful.
Hope this helps,
Roel

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Problem transporting Request from Development to Quality Assurance Server

Hi All,
I m facing a problem of Transporting requests from one System to other.
When adjusting the Request ,the error message reads as follows :
RFC system error in system/destination
[email protected]_HSE
Now,when I check the RFC Connection for [email protected]_HSE,,
i get the message :
" License Check required "
Please respond to this query urgently.....
Thanks in advance

Hi!
I think it's better to call SAP support, if you have problems with the licenses...
Maybe your company forget to pay their fees since a while
Regards
Tamá

Problem in tables of transport request !!!!

Hi all,
When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
Any suggestions would be helpful...
Regards,
Deadlocks

Hey deadlocks,
many ChaRM tables are updated as Fernando said when cmssyscol job finished.
I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
    CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
      EXPORTING
        iv_object = lv_object
        iv_type    = ls_sel_node-type
        iv_command = lv_command
      IMPORTING
        ev_exit    = pv_exit.
LV_OBJECT                                             SLMK900004
LS_SEL_NODE-TYPE                                     REQU
LV_COMMAND                                             TAST
for example.
You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
This will display log on screen
Good luck
Khalil

Transport request main task releasing problem

Hi friends,
Environment is Linux, ECC5.0, Two system landscape,
I have problem with Transport Request task releasing when I am going to release the subtask that willbe released success fully when I am trying to releasing the main task that task is not released and at that time the system wil hang( mesg on the status bar is tp is connected success fully) thats it we wait for long time then also that looks thats only no log will be generating in usr/sap/trans/log there will be a log on this one that log is
WARNING:/usr/sap/trans/tmp/<username.LOS>is already in use (10), I'm waiting 3 sec(20070326124305). My name:pid 7265 on test(sd1adm)
after saw the this mesg I kill the 7265 pid then also same proablem.
I change the ownet of the request then the request is released but not uppeard in the import que. whn i am trying to import in que as manually that will appear in que but not importing when i press the import button the error is tp error 0203.
I check the both users authorizations also bothe authorizations also same then why it wil happening ???
then I check the nfc also that service also running ok the six services are 1.off 2.off 3.on 4. on 5.on 6.off.
I mount the trans dir also the mounting points also ok tms configuration is also ok
wt can i do plz help me with ur valuable suggessions
Thankyou
Ranjith

Hello Ranjith,
This is usually because the tp transport buffer lock file remains locked by the
operating system (OS).
You should be able to move or delete this file from the DIR_TRANS/tmp dir.
After that the tp should run fine after.
Thanks,
George

The transport request is running all the time, what is the problem

I have a transport request which can transport from DEV to QAS successfully ,but failed when the request transport to PRD, I found the request running for several hours. I do not know what the problem? how can I check this problem?
need your help thanks

Hi
The background job Rddimpdp is not scheduled in the system for client 000...And you want to investigate what happend to the job..
The background job details are kept in table TBTCO..So if you goto SE16 and try to choose the fields which are of your interest..as it(this table) has lot of fields. And in this we have fields like last run time,scheduled by,last job change time etc.So with the above information i hope you will be able to get the information you want.
And if everything is fine ..the backgrouns job alone can vanish someone manually might have done done something ..and that can be found out by above investigation on the table.
Hope this info helps...
Regards
Vani

Transporting request problem

Similar Messages

Maybe you are looking for