Transporting RRI repoprts from DEV to QA
Hi
I have two queries Say Query x and query Y which are already transported to Quality. Now the requirement is i need to make the query x as sender and query y as receiver The assignment is done in RSBBS in development server Now my requirement is i need to transport them to quality,I know i can do this by clicking on the transport connection icon but i doubt is
[1]what will happen to the already existing queries in quality,
[2]What all objects should i collect
[3]Should i create a new request or use the same request
Please advice
Thanks In advance
Abhi
chk this :
Query Transportation
assign points if useful ***
Thanks,
Raj
Similar Messages
-
RC 8 error while transporting the query from Dev to Qa - Element missing
Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
Start of subsequent processing ... 20110517070025
End of subsequent processing... 20110517070045
Kind regards,Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you. -
Error while transporting Data sources from DEV to Qual
System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
ManojHI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris -
Error while transporting Dimension Members from Dev to Quality
Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambikahi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika -
How to transport modified query from Dev to QA??
Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
ReddyReddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi -
Transporting SLD objects from DEV to PROD
Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful -
Transporting a routine from dev to Quality
Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
SridharHi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren -
How to transport BO report from Dev to Qas
Dear all,
We have three clients for BO, Dev,Qas and Prd. When we transport the BO reports from Dev to Qas, the parameters in Universe and QAAWS won't be changed automatically,just keep the setting in Dev.
what can I do to change the setting automatically?
Best regards
TianliHi,
you can ask basis to maintain logical system conversion settings .
However if you post the Query in BO forums you would get better response.
Regards,
Satya -
Transporting a role from DEV to QAS in a Workflow
Hi,
I assigned a Role as the possible agent for a std task in DEV. I transported from DEV to QAS, first the Role (where I see the Std. task to which it is assigned and the corresponding WF template in PFCG for the role) with a Customizing Req. and then transported the WFlow template & associated std.task with a WBench TReq.
The transport is successful without any errors.
But, when I see the agent assignment for the task in QAS, the role is gone. Also, When I see the role Maintenance PFCG for this role, I don't see any WFlow tasks in the Workflow tab.
I tried to trasport this sequence(first role and then the wflow & std. task associated with it) twice, but in vain.
Can somebody pl tell me what's going on with the transport of the roles(that should include the wflow tasks & templates).
Thanks in advance
venuMike,
Infact I did first time transport in the sequence of WB req and then Cust. Req. It didn't help and then I tried the other sequence too.
And Could you tell me how to look into the WF configuration of the system to see if it is set to transport the Roles?
Actually, i tried transporting 3 roles under one Cust. Tran.Req, but only one Role got transported correctly and the rest two have been failing.
Pl. tell me if I am doing it correctly...
thank you
venu -
Transporting standard table from DEV to PROD
Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
PavanHi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna -
Urgent: how to import or transport abap class from dev to q
How to import/transport custom abap class from dev to q.
Any suggestions points will be awarded.
Thanks in advance.
MKhi M K,
try SE24, your class, and go to menu 'Go to' -> object directory entry,
click pencil icon and give your package name, will raise request.
SE10 to release and STMS from prod to import.
hope this helps. -
ALERTS CLASSIFICATION is missing after transport the ALERTS from dev to QA
Hi Experts!
I have an doubt in Transporting the Alerts Category.
In Development Server we have created a ALERT CLASSIFICATION as PI_ALERTS and under this i am having two ALERT CATEGORY. i have transported the ALERT CATEGORY and Rules. Now in Quality the two ALERT Categories are grouped under ALL CLASSIFICATION and the CLASSIFICATIOON which i created is not there in QA and also my alerts are not working in QA.
Can anyone help to solve this issue.
Thanks in Advance,
Preethi.Hi!
I have created the alert classification mannually in QA. I have transported the alert rules from DEV to QA.
Now i am getting the mails in the alert inbox but i have used some alert containers but in the mail the value fro the alert container is not displaying.
Can any one give me an idea.
Regard's
Preethi. -
ALV Title Not Display after transporting the Programme from DeV to Qlty
Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout =gs_layout*
CHANGING
it_outtab = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM -
While transporting Key Figures from Dev to Quality system, error occured.
Hello Experts,
While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
field)".
Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
These Key Figures are used in ODS.
Is there I am missing something, please tell how can I make these transports successfull.
Thanks Ishdeep.While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
Yes you missed to transport reference object.
Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
During transpotation you need to collect this reference char with main key figure and then transport.
With Regards,
Kishore. -
While transporting the objects from dev to q or production what are the err
Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran KumarHi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt
Maybe you are looking for
-
ITunes not recognizing iPod.
In the second grievance of the night against the latest iTunes, I've noticed that my iPod is no longer recognized by iTunes when I plug it in. It shows up on the desktop just fine, but not in my source column, even after unplugging, restarting iTunes
-
How to select text in javaFX?
Hello, i don't know how to select text in javaFX to do a copy and paste (for example). Does anyone know? Thank you
-
I need to change the main title that shows in the browser on a FlashHelp project, as in <title>Projectv3.5.3</title> I work with RoboHelp irregularly and haven't had to do this in a while. I can't remember where to make the change now. If you can poi
-
Bitpim not detecting cell phone.
Hello I am trying to use bitpim to sync my phone. It is a LG VX8350, and it IS supported by bitpim. it HAS worked on ubuntu linux in the past, and it defenitly works in windows but for some reason it does not work in arch linux? I really have no idea
-
Wireless connection error on MacBook Pro
MacBookPro, retina display, OS10.8.5 - When opened, the CC desktop app reports there is no network connection when there is a good solid wireless network connection. Bizarzarely the Creative Cloud app updated itself over the same network, but CCD wil