Transporting SQ01 Customer Query from DEV to PRD

Hi All,
I am not sure whether I am in the right forum, but maybe you still can help me.
I created SQ01 for Customer Master query in our DEV environment, and i assigned t-code for the query.
Can i transport it in our PRD? Or it is more advisable to create the t-code in PRD directly?
Please note that the query is both existing in DEV and PRD.
Hoping for your positive feedback.
Thank you.

Hai TINA,
Hope you would have created T code using SE93 for your query program.
and your SQ01 program may be like this, and in the program the bold letter differs from client to client.
AQ    FU  SYSTQV000003XXXXXXX===
AQ    IC   SYSTQV000003XXXXXXX===
So while transporting it may give error that the program is not in the client, or while executing the T CODE it may give dump.
Hence create the query in production client and create the T code for the program and assign to the users.
Some tips may be helpful:
1. Always Use T code : SQVI to create the ALV report, user friendly that SQ01.
2. In case if you are making Customer master details report, if you are include all customer master tables, in case for some customer if some details were not maintained then the details will not displayed.
In that case, in the joint between two respective tables, right click and change it to Left Outer join.
3. If some data is replicated, then need to change the table path, like in case of billing always start from Biling item then to Billing header.
Regards,
Mani

Similar Messages

  • Transporting a SAP Query from DEV to PRD

    Hi,
    We created a Query Report using SQ03, SQ02 and SQ01 for Travel Report in DEV and is working fine. Now, we want to move this query to PRD. For this, we tried create a Transport using SQ02>Environment>Transports and finally a transport request was generated and moved to PRD.
    But the requisite Query, Infosets and User Groups are not there in PRD. Are we using the correct approach to Transport a Query to PRD?
    Please help.
    Regards,
    CMC Team

    1. While saving User Group in SQ03, save it in correct Package (not as Local Object) and a Transport Request will be created.
    2. Create Infoset in SQ02 and save it in same Transport which was created in Step 1 above.
    3. Create Query in SQ01 and again it in same Transport which was created in Step 1 above.
    Release this Transport Request and move to PRD.
    Hope it will help you.

  • Transporting an ABAP query from DEV to QAS/PRD

    Hi all,
    I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
    after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
    I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
    Please explain in detail where and what I am missing.
    Thanks!
    Related answers are appreciated and rewarded.

    Hi Shyam.
    I would like to suggest a few references,
    [SDN - References for Query related to transport request|Query Related to Transport Request;
    [SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
    [SDN - Reference for Transport Request Problem|Transport reruest problem............;
    [SDN - Reference for Transport request Query|Query Transport;
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • I have transport Infoset and Query from DEV to QAS

    Dear Expert,
    I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
    But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
    Please, what should I do?
    Best regards,
    Dedy.W

    Check wether yr request transported correctly since these type of requests generally locked..
    After removing lock only we can transport these..
    Check in quality..
    Tcode.. STMS
    Check here for yr request wether transported or not..

  • How to transport the modified Query from DEV to QA

    Hi BW users,
    I have made few changes for existing query and transported to QA and the changes are reflecting in QA .But did n't transported to Production .and Now I have to added one more InfoObject.
    Now Can I add that Info Object in QA  it self or Do I need to add the New Info Object in DEV and Transport it to QA again.
    Please let me know as it is very urgent to me.
    Thanks in Advance
    Sanjay M

    Hi Sanjay,
        Any changes you should to in DEV only. Do changes in DEV and move transport to Quality and subsequently to Production.

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Transport Questions and Questionnaires from Dev to QAS or to PRD

    Question
    How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
    Answer
    As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
    I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
    Any body has soloution ?
    Thanks.
    Saquib
    http://aspirehr.com/HCM_solutions/hcm_solutions.asp

    Hi Vishal,
    As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
    i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
    So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
    Best regards
    G Raj

  • Transporting active version of datasource from DEV to PRD

    Hi,
    When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
    Thanks

    Hi,
    Pls Refer this link for details about transporting BI Objects
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps,
    Regards
    CSM Reddy

  • How to transport modified query from Dev to QA??

    Hi All,
    I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
    Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
    What steps or procedures do I need to follow for this please?
    Thanks for your time,
    Regards,
    Reddy

    Reddy,
    BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
    Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
    hope this helps a little..
    Good luck
    Mavi

  • Unable to transport Integratin Builder objects from Dev to QA correctly

    Hi,
    System : Pi 711 SPS03
    SLD 7.1 with  latest model and content
    We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
    The interface is being imported as the source SID.
    We checked the SLD configuration for Transport targets, that is when we realised the below issue.
    Unable to Assign Business Systems in respective Business System Groups
    The expected configuration of the SLD is as below:
    UKD_400  - Integration Server for Dev PI 711 server
    INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
    XI_QA - Business System Group for all Quality Systems in the landscape
              1) UKD_400
              2) UC1_ECC_60
              3) UED_400
    XI_DEV - Business System Group for all Developement Systems in the landscape
              1) INTEGRATION_SERVER_UKQ
              2) UC2_400
              3) UEQ_400
    We are unable to put the business systems in their respective groups
    All the Business systems are either being assigned in XI_QA or XI_DEV
    Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
    Thanks,
    Govind
    Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
    Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

    We  have already  assinged the Integration server to their respective business system groups while creating the Business system groups.
       BSG: XI_DEV --> UKD_400( Integration Server DEV )
      BSG : XI_QA  ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
    As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
    But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
    Please help me understand if i am something in the configurations.
    Thanks
    Govind

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • How to transport an existing infopackage from dev to quality?

    Can anyone pls give me the steps for transporting an existing infopackage from dev to qual?
    I am not finding any infopackage in RSA - TRANSPORT CONNECTION
    Points guranteed.

    Here is the steps:
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infopackage' and 'select objects'. Do a search here with your IP technical name.
    3. then choose your IP and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    9. If everything is ok, release your request and ask your basis/security guy to move to QA.
    Also you can open your InfoPackage and click on the truck symbol directly from IP window.
    Hope it helps..

  • Transporting Query from DEV

    Hi All,
    I am not sure whether I am in the right forum, but maybe you still can help me.
    I created SQ01 query in our DEV environment, and i assigned tcode for the query.
    Can i transport it in our PRD? Or it is more advisable to create the tcode in PRD directly?
    Please note that the query is both existing in DEV and PRD.
    Hoping for your positive feedback.
    Thank you.

    Hi Tina,
    It is always prefered way to create objects in development system and then transport them to quality and later to production. If you start to created objects in production your systems will start to be inconsistient.
    Best Regards
    Marcin Cholewczuk

  • Can not transport from DEV to PRD (Hang up)

    Hi Experts,
    Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
       ==> Stop all TP running in OS level
       ==> Delete all pending job in Import Monitor (with truck logo)
       ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
    What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
    Thanks.
    Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

    Hi,
    Its well known problem which is discussed many times in many threads.
    Did you check TP System Log and TMS Alert of the System ?
    Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
    Please refer these useful threads with similar symptoms.
    [Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
    [regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
    Also check this SAP  Note 71353 - Transports hang during background steps.
    Regards
    Bhavik G. Shroff

  • Problem while transporting Screen exit object from DEV to QAS client

    Hello All,
    I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
    After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
    Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

    Hi,
    First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
    You might have missed out in transporting the enhancement activation(CMOD).
    Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
    Thanks,
    Vinod.

Maybe you are looking for