Transporting SRM Config

Hi,
If i transport SRM configs from one system to another, is there anyway i can change backend references in target system. Any program/transaction code?
Regards,
Kamal

Hi. What I normally do is try and leave target system blank and see if that works. It does for some config and then it can be transported fine because there is nothing tying it to 1 backend system.
For example, the link from product category to G/L account can be configured with no backend system, as long as you configure it before the product categories have been replicated to SRM.
Some config is entirely dependant on backend system though, and even the SRM cookbooks tells you to configure manually in each client by opening the client as part of the initial set up.
Regards,
Dave.

Similar Messages

Transport of config objects...business system prblem...

Hi Gurus,
We want to transport dev and config objects from XI qua to a XI test server... we hav successfully transported all design objects...but we are facing problem while transporting the config objects because of business and technical system issue....the business system in quality points the ECC quality....how can i tranposrt the config objects with same business system name....is there any way??
Thnx in advance...

Hi,
This will be Maintained in SLD .You know what will be Business system name in Quality or Production.
While Creating Business system you need specify in the Transport Tab which is your Target Business System and also the Group like Production or Quality ,
When you do transport from Development and for the Dev_Bs (Bussiness system ) if you assign the Qaulity System Bussiness system ,it automatically move the object under Quality Business System.
if this setup is done in SLD when you do transport the Configuration Object It Automatically assigns the Quality and production Business System if you are doing Transport from Dev Respectively.
hope this helps.
Thanks,
Madhu
Edited by: Madhusudhan Honnappa on Sep 3, 2009 8:11 PM

What SRM config changes will need to take place with a change to Plant

Hi
Please could you tell me What SRM config changes will need to take place with a change to Plant, Co Code, Purchasing Org, Purchasing Group,
Cheers
B

Yes Disha loads more questions,
is it simply a GET_LOCATIONS_ that I need to run once all the new plants have been created in R3 or do i need to create the plants in SRM?
With one Purch org to one co code to one plant how will this effect the workflow start conditions
How will the be differnt to a on Purchasing Org to many co codes to many plants?
Any thing else you think that I might need to do with this change
Thanks
B

SRM CONFIG Guide 5.0

Hi,
Can any one please send me SRM config guide 5.0 to following id : [email protected].
Points will be rewarded .
Regards
Arvind

Hi Raju,
Sent some useful confg guides to [email protected]
Pl. reward if found useful.
Regards,
Rajendra

Transport retraction config

Hello All
Have done the config for retraction of Funds management data from BI to ECC. It works fine in dev. However when I transport the same into ECC QA, nothing is visible.
I guess the config done in ECC Dev is stored against the BI Dev client and hence it is not visible in ECC QA.
As we do the mapping of dev source system to QA source system in BW, do we have something similar in ECC to map the dev logical client to QA client?
Apprecaite your quick response.
Regards
Raghu

Hi Martin,
I have transported the config and the transport was successful.
As the configuration for retraction is done for BW system like BI1CLNT001 which is the BW Dev, when you transport the same to QA, this should be change to BI2CLNT002. Could you please let me know where and how this is mapping or conversion is done in ECC?
Regards
Raghu

How to 'transport' CPS config from QA to Prod?

Hi,
I setup a full job schedule with definitions and chains for a ECC6 system QAS (in isolation group QAS).
I like to move this same QA config now to be valid for out Production system PRD.
Is there any way of 'transporting' this config rather than having to redevelop the whole schedule for PRD?
Thanks,
Adriaan

You have to buy the full license of CPS to get this 'nice' important feature.

Transport of Config

Hi,
I found out that while transporting a ABAP code a file is created at the server for that transport.But it is not the same for the Config transport.Is there some place from where transport logs for config can be extracted.
thnx in advance
Regards,
Chirantan

i need to create a report that will display the status for a TR..i.e. to which all systems it has been moved to.I have been able to do that successfully to some extend.
What sap does in this case is that it creates a file at the server that contains the log for that particular TR,this file can be used to determine the status of the TR at a particular server.
But in case of a "config TR" no such log file is created.Now, I need to check(without these logs-since they are not available) that they have moved to other systems.
I hope the situtation is clear now.
null

BADI TRANSPORT SRM - R/3

DOES ANYBODY KNOW THERE SRM BADI ALLOWED TO TRANSPORT FILES FROM SRM AR / 3?
CAN Y HELP ME?
VERY THANK´

hello
Exist a similar problem in the srm forums:
Check it.
Regards
José Luis

Transport Of Config Table

Hi Guys
I've written an update program that makes changes to the T510 table in one client but I need to transport it programmatically to another client.
Programmatically in the sense that after the update program has finished I need it to come up with the appropriate dialog boxes, these dialog boxes are bog standard dialog boxes that appear when the T510 table entry is changed on a transportable client.
1) Maintain Table View Initial Screen
One with table/view name and 4 buttons Display, Maintain, Transport and Customizing.
Upon pressing Transport button
2) Should prompt me for the Country Grouping, Pay scale type and Pay scale area dialog.
Green tick this.
3) Prompt for customizing request - i.e. where you can select an existing transport or create a new one i.e. where the DVLK<no> appears.
Green tick this.
4) Finally the transport view "pay scale groups" overview dialog.
Here you would highlight the entries and then press the Include In Request button.
Many thanks in advance.

Hi
Generation interrupted; process mBDocs first (see description)
Could you please check if there are unprocessed BDOCS in your system, you can use transaction SMW01. You might need an application guy to decide how to handle them.
Best regards, Michael

How to transport deletion config entry

Hi
I have deleted payment terms in Development client and want to reflect the same in Quality.It did not ask for Transport request while deleting.I am aware in case of any addtion or modifications we select the particular new/modified entry and create a transport request by including the changes.
Here I can't do that since entry is deleted.How do I delete the entry in Quality.
Please help.
regards

Hi,
Good afternoon and greetings,
You can recreate the Transport Request in the following way
1. By seeing the entry in QA recreate the Payment Method in Development client and at the time of saving ensure that a transport request is prompted.
2. You will have to delete the Payment Method and SAVE IT IN THE SAME Transport request and then release it to see the effect in the QA client.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Performance Management - Transporting "Define Tabs and Process config"

Good Morning Experts,
We are moving from Development into our PPT (pre-production test) environment and have successfully transported the Performance management category settings/values, as well as the Template itself.
Upon executing the Performance Management toolset from the portal side, I see that my tab configuration for the template did not transport. I have searched high and low for any reference to transporting this config step, but have been unsuccessful, thus this post.
Does anyone have any suggestions for transporting this configuration. As you know the IMG Personnel Management > Personnel Development > Objective Setting and Appraisals > Define Tabs and Process Configuration for Template launches a webdynpro app to make this configuration step, so saving these setup selections is the only option. How can I force these changes across ? I look forward to your responses !
Chris Thomas
Duke University and Health System

All - the solution:
SAP Note 1428054, implement the corrections according to the note.
Run the report, RHHAP_Transport_tab_config which will generate the transport containing entries from tables:
hrhap_tab
hrhap_tab_data
hrhap_tab_t
Basis implemented, I ran report, transported the tabs and and all is well.
Chris

Transport abt ALE Config

Hi,
We have done all IDOC to File scenarios
We have configured the ALE settings on SAP R/3's DEv server.
Can i transport these Config to SAP R/3's QTY Server or Should i create them as it is appear in the SAP R/3's DEV server???
Regards
Suman

Hi Suman..
This was the ALE settings...
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.\
idoc to idoc
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
regards,
Kishore

XI Config transportable?

Hi,
We have done some config in our XI for CCM catalogue upload etc. I have exported the configuration objects into a /sapmnt/<XI>/.../export/abc.tpz file in our Dev system which we have moved into the /sapmnt/<XI>/.../import/abc.tpz folder in our QA system. However when I go into Import config objects in our QA system, it does not find anything to import.
Can anyone please tell me if this is the way to transport XI config, or does it actually need to be done in each system?
Thanks,
Paula.

Hi Paula
Do you have exported / imported the design objects as well? This is done via the integration repository (Design: Integration Builder). This you need to do before you try to export / import the configuration objects because they build on the design objects.
How did you export the configuration objects? Did you export all objects of a partner, service, scenario or just a single object? In case of scenario: are all your configuration objects you want to transport assigned to the selected scenario?
Is your SLD correctly configured? During transports from DEV to QA platform the system transforms business system names participating in a scenario. This is done in order to avoid wrong configs after a transport to QA (or later PROD) platform and thus to avoid messages being sent to the wrong systems.
But after a successful transport you'll have to adopt your config anyway. Some config attributes are never transported.
Not sure if this helped you. I'd suggest to post your problem in the XI forum. There you will for sure find someone able to give a solution or at least to give some guideance.
Kind regards,
Renaud

Profit center config transportation

Dear experts,
I am doing configuration for profit center accounting. It is not asking request while saving the config. please help me how to transport this config to testing client as well as production client.
Regars
Jay

I suppose you are implementing Classic PCA in CO.
The transportation can be done thru
SPRO - Controlling - Profit Center Accounting - Tools - Transport Customizing Settings
Enjoy.
Venkat.

Help needed in SRM upgrade to SRM server 5.0

Experts,
My client is on EBP 2.0 and going for an upgrade to SRM Server 5.0 and working on classic scenario and keeping the backend as 4.6C for this phase of the project. Please share any experiences on how to go about the upgrade, any questionaries, methodologies also I would like to know the major differences between EBP 2.0 and SRM 5.0.
Thanks in Advance,
Surya

HI Surya
Pls go through following sites
http://service.sap.com/instguides (install and upgrade guides)
http://service.sap.com/ibc-srm (config guides - upto SRM 4.0)
http://service.sap.com/srm (general info)
The installation guides and Config guides will give you perfect steps to follow for installation and configuration.
regards,
Nimish Sheth

Transporting SRM Config

Similar Messages

Maybe you are looking for