Transporting the BS and TS from 1 SLD to another...POSSIBLE??

guys,
Is it possible to transport the contsts of 1 sld ie. the TS BS into antoher SLD with CTS or any other mechanism?

Hi
Yes it is possible.
just select your TS, and export. you can save that as a .zip file in ur local client (file system).
do the same for BS.
go to the other SLD, go to administration, import/ export CIM classes/ instances.
import the file.
you may get some error due to
1) BS pointing to old XI server
2) some "installed softwares" of the old sys.
you can delete unwanted "installed softwares" & make ur BS point the right server.
Regards
Vishnu

Similar Messages

How to move the pages and reports from one dashboard to another

hi all
can please any one tel me hw to copy the reports along with pages from one dashboard to another
Thanks

Hi,
Go to Administrator->Manage Presentation Catalg->Click on Group folder under which the dashboard and reports are present
1)Create one folder and copy the reports which are present in the dashboard pages you want(reports will be under some specific folder,open and copy one after the other to the newly created folder).Do this if you want other set of same reports for new dashboard that you are creating
2)Click on _portal and create a new folder(new dashboard)
3)Click on dashboad that is to be copied
4)copy the pages one after the other into new dashboard folder
If you are not keeping new set of reports then no need to point reports in pages,if reports are placed under new folder then go to each page and pull those reports from newly created folder.
Regards,
Srikanth

How do I move all the apps and podcasts from one mac to another mac?

What is the best way to move all the apps and iTunes content (songs, podcasts, etc) from one Mac to another Mac? I am switching to a newer computer. I connect (with cables) an iPhone 4 and an iPad 2 to the old computer for syncing.

Take a look at this.
iTunes: How to move your music to a new computer
When I recently got a new MacBook, I set it up with Times Machine using a backup of the old computer. It could not have been easier. If you use Time Machine - that will copy the contents of the old Mac to the new Mac - iTunes library included. You will have to authorize the new Mac in iTunes - Store>Authorize this computer.
There are ways of copying the purchased contents from the iPad to the new iTunes library as well if you need to do that. But as long as you have the old Mac - copying the library and putting it on the new Mac makes the most sense.

How to move Software componet and product from One SLD to another

Hi Experts,
I want to move the software component that i created in the development SLD and the product from dev system to Prod system SLD. Our development and the quality share the same SLD so i didnt have to do anything. How do i export the software component and the Product form dev SLd to Prod SLD Or what steps do we need to follow to move the Software component from SLD -> SLD.
I am new to PI and this is the 1st time in am doing this activity. Request you help.
BR Heth.

Hi,
Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
You should ensure that your CIM Model and CR Content on your SLD are updated as
per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
Regards,
Aidan

Is it possible to Transport the Query(in SQVI) from one client to another?

Hi,
i hav created the query in Production now i want to assign the t-code for that perticular query...
i want to transport that query from PRD to Dev then only i can assign the t-code...
is it possible to transport query from Production to Dev?
Regards
Smitha

hi smitha ,
i don't think its possible to transport query created form the SQVI in to other client.
for that other solution is create query with same name in other clinet and save it in local package
and check the generated program name and made tcode in se93 . it will work .
or
cretae query from the SQ02 , SQ03 , SQ01 .
Query made through this procedure is transportable .
Regards
Digvijay Rai

I wanted to keep my locked screen display with the time and date from turning off is that possible

So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

wjosten wrote:
Again, there is NO WAY to do what you asked: display the time constantly.
I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

HT4527 I just had to clear the hard drive on my computer - now I want to transfer all the music and pictures from my ipad back onto my computer. 'Sync' doesn't do it. What do I do?

I had toclear the hard drive of my computer and reinstall Windows 7. Now I want to transfer all the music and photos from my iPad back onto my computer. I authorized the computer (it is the ONLY computer authorized on this account - and this is the ONLY account on this iPad). ITunes then downloaded my purchases...or at least it tried - out of the hundreds of tracks I have purchased, it managed one album that I bought over a year ago and NOTHING else. So I tried to Sync - since on older versions of iTunes (that were SO MUCH MORE user friendly) that would do the job -transferring things that were only on the iPad onto the computer and vice versa. It doesn't do that anymore. So I went from my iPad's summary to the Music tab - the box for Music was not checked but when I checked it said the only thing it could do was erase EVERYTHING from my iPad and replace it with what was on my computer (that ONE album). What is going on?
Why hasn't iTunes downloaded my other purchases since I authorized the computer? (there are over 3,000 tracks...not 18)
How can I download my iPad to my computer?

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

Can I sync podcasts and ITunesU. from one computer to another that both have the same acount.

Can I sync podcasts and ITunesU. from one computer to another that both have the same account.

No. Time Machine won't get your boot camp partition back. There are excellent utilities that move entire hard drive contents among hard drives such as SuperDuper! and CCC, but as far as I know they don't work with boot camp partition. My suggestion: reinstall Mac OSX on your new Mac (you don't want to hold Option key to start it everytime anyway), partition it with boot camp exactly (or similarly) as you did to your previous Mac (install the same operating system, which should be one of the Microsoft Windows I assume). Use Migration Assistant as kaz-k suggested to move all the stuff on the Mac partition of your previous Mac. Reboot both your Macs from the boot camp partition - I assume they are all on Windows platform. Now you have two computers on Windows platform. Use Norton Ghost or similar tools to migrate all the stuff from your old machine to your new machine. Hope this helps. Backup all your data before such operation. Good luck.

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

Moving Events and Projects from one location to another on the same hard drive.

Hello.
I've searched in the FCP X User Manual, on this forum and in Google, but have found no explanation of how to do this, so I'm posting this here in hopes that someone in our community will be able to help.
I've previously stored my FCP X Events and Projects folders on an external 3TB hard drive, because there is more room on it than on the internal 1TB hard drive, but, since then, I've worked with other media apps, for video, photography and audio, the files for which are also stored on the external hard drive, and this has created a bit of clutter with no folder structure to keep it tidy.
I like an organised file structure on my system, to keep it uncluttered, easy to navigate and efficient to use, so I put all the files for my photography, video and audio apps into their own folders, which are, in turn, stored in their appropriate folders for Audio, Photography and Video, and those three folders are stored in a folder called Media, and then I directed each app to its own files.
The only app with which this has been a problem is FCP X. While there is a way of relocating projects and events from within FCP X, it allows the user to move them from one hard drive to another, and not, as I want, from one place to another on the same hard drive.
I'm not sure if it matters, but perhaps it's relevant to mention before the next paragraph that the files that had previously been imported as events are, to save hard-drive space, stored in the events folder as shortcuts to the original files, which are stored elsewhere on the drive, rather than as duplicates of those files.
In Finder, I copied the Events and Projects folders to their intended new locations and tried in the app to link the events and projects to their new Finder location. It seemed to have worked, until I moved the original folders to the Trash. On re-opening FCP X, it was clear that the linking hadn't worked. I returned the original folders from the Trash to their original location, but that didn't entirely reverse the problem. I noticed also that, in the original and duplicated Events folders, the shortcuts had lost their links to the original files stored elswehere on the drive.
Fortunately I had run a backup before starting, so I restored the original folders and the app from the backup, and all was back to normal.
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
Thank you.

Ludio wrote:
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
I
Message was edited by: Russ H Apparently mis-read the questions.

How can I sync the calendar and contacts from my icloud account to the new icloud account we set for him. I have already set up the Family connections.

How can I sync the calendar and contacts from my icloud account to the new icloud account we set for my husband on his iPad and iPhone 5S? I have already set up the Family connections but they are not syncing.
Thanks.
Jenny

Oops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.

I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?

I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?

If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help. Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive.

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll?

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll, the applications can be redownloaded and she had no music. Is there any known bug about ipods locking on their own because no one seemed to have tried to bypass the 4 digit code and it is locked for 26 million minutes.So thank you if anyone has any information or help for us.

Your friend may have placed the ipod next to an object that repeatedly pressed the screen. Under certain circumstances this can lead to what appears to the iTouch to be failed attempts to access the system. After repeated failed attempts, the Touch increases the waiting time required for the password and may ultimately lock in the way you describe.
It's been a while since this was posted, but this might be informative to someone else who finds themself in a similar predicament.

Can we hide the tables and columns from subject areas in the front end

Hi,
Is there any way to hide the tables and columns from the subject area in front end.I need to create a report with some tables which the user does not want to see.So after creating the reprot can I hide those tables and columns in the front end

Hi,
Your question is not that clear to me...do you want to hide the entire table/column that dont want to show up in the front end then you could do in Presneation Layer in the RPD by going Permissions in the property of that object.
But if you want to hide the column in the report that can be visible in the subject Area: go to column properties -> Column fomat...thereis Hide option.
Can you please elaborate your question...what exactly you are looking for...
--SK

Transporting the BS and TS from 1 SLD to another...POSSIBLE??

Similar Messages

Maybe you are looking for