Transporting the DTP
Hi
My question is whether DTP's are suppose to be transported from one environment to another...DEV to QUA or QA to Prod...i had a discussion with a few people and got to know that they are client specific and are not suppose to be transported...i 'll appreciate if someone can clarify my doubt and give me a resolution......points will be duely awarded...
thanx in advance
Hi,
As far as Transportation is concerned , between two servers everything can be transported except the
source system , only mapping can be done for source system .
Hope this will surely clear ur doubt
Pls assign points if answer is helpfull
Regards ,
Subash Balakrishnan
Similar Messages
-
Error When Transporting the DTP's
HI All,
I was facing the problem with Transporting the DTP's to Quality.
Transport log error : Program Terminated (job : RDDEXEC,no.: 09463801).
(Program RDDEXECL'Which was started in the background,was terminated abnormally.)
We are using BI7.0 WITH S.Pack 09.
If I Checked the same job in the Quality System. the job has been cancelled.
JoblOG in Quality is :
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server sapbiqa were synchronized
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/04/2006 09:58:04
Shordump :
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_RSBC_ERROR_HANDLER_TPL=====CP" or "CL_RSBC_ERROR_HANDLER_TPL=====CM00K"
"IF_RSBK_TPL_OPTIONAL~CHECK"
Source Code Extract
Line SourceCde
1 METHOD if_rsbk_tpl_optional~check.
2
3 * ==== not for error-dtp ====
4 DATA: l_rx_1 TYPE REF TO cx_rs_access_error,
5 l_r_dtp TYPE REF TO cl_rsbk_dtp.
6 l_r_dtp = cl_rsbk_dtp=>factory( if_rsbk_cmd_tpl~n_dtp ).
7 TRY.
8 IF l_r_dtp->get_dtptype( ) = rsbc_c_dtptype-error.
9 EXIT.
10 ENDIF.
11 CATCH cx_rs_access_error INTO l_rx_1.
12 CALL FUNCTION 'RS_EXCEPTION_TO_SYMSG'
13 EXPORTING
14 i_r_exception = l_rx_1.
>>>>> MESSAGE ID sy-msgid TYPE 'X' NUMBER sy-msgno
16 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
17 ENDTRY.
18
19 DATA: l_sx_fields TYPE rsbk_sx_fields_keyfl,
20 l_s_fields TYPE rsbk_s_fields_keyfl,
21 l_lines TYPE i,
22 l_dummy TYPE c.
23
24 CALL METHOD super->if_rsbk_tpl_optional~check
25 EXPORTING
26 i_repair = i_repair
27 i_r_msg = i_r_msg
28 IMPORTING
29 e_is_repaired = e_is_repaired
30 e_subrc = e_subrc
31 e_dyfie = e_dyfie
32 e_dyfie_index = e_dyfie_index.
33
34 LOOP AT p_t_fields INTO l_sx_fields.
Please let me know any one faced the same above problem.
Regards,
JoHi Joji,
Check notes 951772 and 949976.
These notes should be also interesting:
- 950287
- 948913
- 943957
- 942392
- 932826
Good Luck! -
Hi Guys,
I have created one new info cube and transformations and DTP's on the info cube in development. Now i want to transport info cube and transformations and DTP 's to quality and production system.
i am tryting to collect these objects into transport in the transport connection and i have selected my info cube and
and i selected the option "Data flow afterwards" in the Grouping
it dsipalyed only info cube name and transformations and info object, it didn't display the DTPS , so how to collect the DTPs and transport DTP's to quality and prodcution system. Please suggest me if i miss anything there.
and also i have another question is
do we need transport DTP from Dev to quality and Production systems or do we create DTP in each system seaprately.
Please suggest me how ti proceed. Please share your thoughts on this.
Thanks
SG
Best regards
SGHi,
If you want to transport the DTP just double click on your DTP -
select GO TO menu--Object Directory Entrygive the package name and select the request in which you want to collect it.
Regarding creation of DTP in QA and PRD itself that varies from client to client.Some client give authorization to create directly and QA and PRD whereas some want everything to be transported form one system to another.
Also read about object chageability as well.
http://help.sap.com/saphelp_nw70/helpdata/en/0e/a7343e8c7f6329e10000000a114084/frameset.htm
Hope it helps.
Regards,
AL -
Exception CX_RS_ERROR occurred when trying to run the DTP from Cube
Hi everyone,
I've run the DTP & loaded the cube using normal transformation routines , it works fine in the Dev Sys but not in quality & production. I've access only to the Dev sys. In Qual & Prod when trying to run the DTP from Cube to open HUB
we're getting the following error
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_TRFN================CP, include: CL_RSTRAN_TRFN================CM024*
My system support package level is SAPKW70106.
I've found note 920338 but is for SAPKW70107.Hi,
The issue seems to be with the one of the routines in the transformation and similar kind of the issues were solved by retransporting the DTP & the related transformation.
Kindly reactivate the DTP and transformation in the source and execute a new request to transport the DTP, transformation and related routines to Quality & Production again.
Hope this helps.
Rgds,
Colum -
Error transport, when the DTP is implemented in Process chain
Dear all,
we are facing with a problem: when a DTP is already implemented in a process chain, the tranport of that depending transformation will get an error (return code 8) with message like this:
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Aktivierungs
Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B deleted in version M of DDIC
Action canceled
The user terminated processing of objects
Impact analysis of Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B
The user terminated processing of objects
Error when activating Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B
Dependent object DTPA DTP_049H3XG5UDOXUJ5RG44W3JN30 set to inactive
If we deleted the DTP in the process chain first, then reimport the transformation, the transport will be succesful. But that is not really the solution, isn't it? What is here the phenomenon? Do we need some setting else or is there any SAP notes for this?
Thanks a lot for advise!
Van Anh NguyenHi,
sorry that I may not be clear in my explaination. The Scenario is below:
- we create a transformation in C
- transport it to Q and create there DTP and process chain. It works well for a long time.
- then change something in transformation in C due to an enhancement
- try to transport transformation to Q, but it failed. Transformation inactive. DTP inactive.
- try again by deletion DTP in PC (in Q)
- reimport transformation again --> that works. Transformation transported and active in Q. But DTP lost and we have to re-create it in PC.
Question: is there any method to avoid the step of DTP-deletion ? Thank you!
Van Anh -
Urgent : error to Transport the PC with Two DTP's
Hello Experts,
I have a process chain to load the dta from PSA > DSO->CUBE. I am using two DTP's. everything was working fine thorugh in Development System.
But I am not able to transport the PC into Quality System.
My process chain has the following Variants.
Start Variant
Load Data into PSA ( Info Package )
DTP used to load data from PSA to DSO
Activate DSO
Delete PSA Request ( to avoid duplication in DSO as its full load)
Delete Index ( Iinfo Cube)
DTP ( load data from DSO to InfoCube
Create Index ( Info Cube)
I got a
Warning : A type 'Datentransferprozess' process cannot precede process 'Delete Index' var. in the chain.
Error Message : Results of check for process DTP_LOAD DTP_D38ID21GB3K7NJOOM7LJQT6BV in
chain
Process variant DTP_LOAD DTP_D38ID21GB3K7NJOOM7LJQT6BV does not exist in
version A.
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
The errors affect the following components:
BW-WHM (Warehouse Management)Hello
I checke all the DTP's and data targets in my target system as well as in my source saystem, all are active.
I tested the process chain in Development system everything is working fine. Only problem is I am not able to transport the PC from Development to Quality System..
While importing the Transport request into Quality system imoprt fails and raised error messages.
I did manual load into the data targets in my target system. Every thing was working fine.
Eventhough I am not able to transport the PC into Quality system.
Any suggestions please. -
Dear all ,
I couldn't transport more than one DTP which is uploading same target . On each transport last DTP overwrite previous one .
For example I have two following DTP
Current month DTP
Previous Month DTP
but when I'm trying to transport them just
Previous Month DTP is transported to the target system
Then I'm trying to transport Current Month DTP but it is overwriting on Previous Month DTP
Do you have any suggestions on this problem
Thanks in advance ....Hello Erkan Akin,
We are on SP17 and had a lot of DTP / Process Chain transport problem. Some solution we have two DTP, one for actual and other for previous period.
After aply all these SAP Notes below, we fixed the problems and now we are transporting DTP / Process Chain correctly from dev to quality environment:
1147587 70SP18: process chain after import: DTP not found
1250577 70SP20: Source-dependent Error DTP texts after transport
1271324 70SP21: Error DTP text incorrect after transport
1002791 7.0 Support Package 18: Process chains - DTP confirmations
1139653 70SP18: DTPs and error DTPs generated in process chain
1147766 P18:PC:DTP:Select only full DTPs for overlapping deletion
1163735 70SP18:Full DTP & Error DTP is not activated after transport
1267427 SP20: dtp cts
1271730 70SP21: Transport full DTP with OLAP or selection routine
1272636 70SP21: DTP transports after system copy
1330738 70SP22: Transport full DTP without filter overwritten
1151359 ASSERTION_FAILED dump in DTP transport
1158914 Transport of filter routines
1317338 Problems with grouping
1148403 70SP18: BDLS after early replication
Please, let me know if you try some of these notes, and if helped you.
Best Regards,
Mateus Celeste -
When we do system copy how the DTP converted
Hello All,
I am little curious to know about the DTP bahaviour after the system copy.
example: In DEv system I created the DTP A
When it went to Quality it become B
When it went to Productiion it become C
This is normal behaviour in 7.0.
When we do the system copy the DTP C will come in DEV and Quality system.
Next time suppose i changed the DTP C and I will transport it to Quality does it create new DTP in Quality or it overwrites in quality.
When we run the BDLS aftere sytsem copy will DTP technical name will change back to A in developement?
I am little curious to know about this.
Any help will be appreciated.
Thanks
GopalHi Chetan,
I already checked the note but it has not mentioned the behaviou of DTP after suystem copy. It is giving the logical name with DTP and I ma talking of the DTP Technical Name.
I am really curious to know about this.
If any one did the system copy and can some one throw the light on tha. Really appreciate.
Thanks
Gopal -
Hello experts:
1. I changed a filter in a DTP on development system.
2. I activated the DTP,
3. attached the DTP to a change request from workbench (NOT TRANSPORT CONNECTION from rsa1)
4.released the change request to the testing system.
5. Imported the change request into testing system.
On testing system the DTP is not changed, even if the import of the Changes is marked as succesful.
I tried to redo the 5 steps previously enumerated: the result was the same=nothing changed.
Did I missed something?
Thank you in advance.
MHi,
There is an OSS note. Don't remember the number.
If you implement that note, the Selections from "Transported DTPs" will not be imported into the Target Systems (Quality, Staging & Prroduction".
I think that OSS note was installed in your system.
The reason most Clients use that OSS note is: In Production, many more selections are used than in Develpment. They don't want people moveing DTPs with old selections overwriting Production Selections. Its dangerous too.
So, just make changes to DTP selctions directly in Production and you already know that transporting those DTPs will not change them. Just in case, make the same change in Development also and leave it there.
GL,
Uday-Ram Chamarthy -
Error while activating the DTP
Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.MHi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth -
Error while transporting the Vendor in MM-SUS
HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish ShethHi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers. -
Error While Transporting the DSOs
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri.. -
ALV Title Not Display after transporting the Programme from DeV to Qlty
Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout =gs_layout*
CHANGING
it_outtab = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
RC 8 error while transporting the query from Dev to Qa - Element missing
Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
Start of subsequent processing ... 20110517070025
End of subsequent processing... 20110517070045
Kind regards,Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.
Maybe you are looking for
-
Can multiple people post on the same shared photo stream?
Is there a way to have multiple people post on the same shared photo stream? My cousin would like to have a single shared photo stream where we can both post photos on it and comment, instead of having two separate shared photo streams. We think tha
-
How to creat a cross - Org unit(different root org unit) reporting in OM
Hi All, I would like to know how to creat a Cross reporting strecture in OM between 2 different Org units( Root org units or Sub-org Units) for they existing positions in OM. Thanks in advance, Regards, Surya
-
Hi everybody, I'm trying to get a list of running processes, and for each process I need its Process ID, Process Name, and the command line that run this process. I found a way to get everything but the command-line, by JNI wrappers (below are links
-
Restored Catalog Drive letter confusion
I have Elements 7.0 (20080916.r.508356) running under Vista Home Basic on a Lenovo M57. I have migrated from a database held on a 1TB USB removable drive attached to a laptop running XP. I backed up the catalog to the USB drive, which when attached t
-
Help me..