Transporting VC Models and related pages and iviews across portals

Hi,
Hope you all are doing good.
We have a particular requirement, which i hope you will be able to give some inputs.
We have models for which we have .gml files. In addition we have the models deployed in Portal as iviews under Visual Composer folder.
Our requirements is to transport the models in VC and iviews in Portal to a new installation.
When we take the content dump from portal for the models and import into new installation it works fine.
But when we want to make changes in VC model (.gml) files and redeploy the VC application in Portal, it does not over write the existing iview for same VC application in Portal.
The ID's of the deployed iviews for same VC appls are getting changed and hence not updating the same one.
Any idea what we are missing ?
Appreciate your help
Regards
Sumit

HI Sumit,
Whenever you import .gml file in new Portal firstly one model name should be created then only we can import the existing model from Dev box at that time the package name differ in such case.
this may be a precaution from SAP
I also tried the same thing what you did but getting the same kind of deployment what you are getting.
Hope your doubt are clear
Swapnil

Similar Messages

HT4623 The update to iOS 7 is frozen at the Terms and Conditions page and will not move no matter what I click on. I cannot access my iPad as it is frozen on this screen.

The update to iOS 7 is frozen at the Terms and Conditions page and will not move, no matter what I click on. I cannot access my iPad as it is frozen on this screen. How do I remedy this nightmare?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try updating the software again.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Same advice helped this user for the same issue > HT1414 tried to update to latest iOS...: Apple Support Communities

Firefox is slow to load and view pages and repeated "Firefox is not responding" message

Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

Note that Firefox 36 has been released officially.
*https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Blank call and contact page and quit automatically

When I go to the call page.It goes blank and quit automatically and so does the contact page, though I can receive call.
When I do the restore, it requires me to upgrade to ios 5.0.1. But I don't want the upgrade as everybody says the battery life after upgrad is even worse.
What happen to my phone? Can I restore it without the upgrade?

Basic troubleshooting is reset, restart, restore. Have the first two been tried before resorting to a restore?
It is only possible to restore with the latest/current version of iOS... there is no reason to not install the latest/current version.
The majority of issues reported are minor and many are non-issues.
The forums are like an emergency room, people generally only come here with issues. The majority of users never have any issues and do not come here.

HT1923 after following the instructions to completing uninstall iTunes and related components, and I'd restarted and reinstalled iTunes, i received the error message that iTunes couldn't load because the deleted Apple Application Support wasn't present. W

After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Some times firefox does not opens facebook and google pages and this does not happen for other sites. Iam Currently using windows xp and using 3.6.3 Firefox version.Please help.

Some times the fire fox does not open google and facebook pages but it does not happen for other sites. Iam currently using Windows xp and iam using Mozilla Fire fox 3.6.3 .Please help
== URL of affected sites ==
http://www.facebook.com,www.google.com

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

I have updated to ios5 and latest pages and it has changed table borders and header colours etc, the colour I was using was imported and there border lines are v thick, help has made my docs look rubbish

I have updated o iOS 5 and updated my pages but it as altered my documents, layout, and tables, changing header row colour and thickness of border lines, some thick some thin within same table, if I put default it puts all the lines back, but I only wan them in 2 out f the 4 columns, If I try to change each section then I have to select all borders as default does the whole table, but if I chose all then the order lines are all thick is there any way of changing thickness of lines, and also does anyone know how to pu in a table of contents? I'm currently having to manually put in the info in the table which is v long. Thank you very much

Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries.

My keyboard occasionally goes crazy, not allowing me to type. Also, cursor goes crazy and opens pages and windows at will. Help!

My typing cursor frequently goes crazy, not allowing me to type and jumping from place to place, deleting letters. Suddenly, a line I have typed will be highlighted and deleted at will. Also, mouse cursor moves at will, opening multiple pages in seconds. Help! What could be causing this, and how can I stop it?
I've had my Macbook pro for over a year and it has never done this before. Restarting the computer fixes the problem temporarily.

My first thought was the hard drive and OS has a built in Sudden Motion Sensor whcih will stop the hard drive heads from crashing into the platters when the computer is moved suddenly. This does work most of the time and could cause some of the tings you are seeing.
But then after reading more of your first post it seems your system and drive is doing some very strange things.
It would be best to first take it into an Apple Genius Bar and have it looked at. They can run tests on it and since it is still in the original 1 year warranty this should not cost you anything even if something needs to be replaced.
You can also run the Apple Hardware Test on it your self by connecting it to the Net by Ethernet cable and booting holding down the d key or the Command+d keys. That will boot the computer from the Apple internet servers and load the AHT.
Good Luck.

Putting code to my Jsf and Jsff pages and calling Java class

I want guidance on how to write simple code on adf pages
1. I have adf pages (.jsf and .jsff) where I have input text fields and command buttons, I want to put custom code on the command button such that when you click on any of the buttons at runtime, the code will be executed.
2. In my application, I have a java class which I have written, I need to click on any of the buttons at runtime, the application will call the java class and execute the class. Essentially, taking parameters from my adf page(s) (.jsf and .jsff) to the java class and also returning parameters after execution.

The version of my Jdev. is 11.1.2.3.0
Which docs?.... I will be grateful if you can point to the particular doc fro me.
1) Can you pls tell me in one of few sentences how to add method and set the actionListener property.
2) in question number 2, I am totally lost... Let me explain my self again to clarify the situation. In my adf page, I have a button and three input texts,my purpose is that at runtime, when a user click on the button, the values in the first two input texts will be passed to the java class as parameters, it is expected to use these parameters to process some form of calculations and return a value which I will place on the third input field.

I just buy macbook and preinstalled page and keynote and now I free to download Can I have a refund for preinstall

I want to Can I have a refund for preinstalled

But if you bought a Mac before the announcement on 24-Oct with Pages etc pre-installed then you would be charged $20 per app. I think in this case you could get a refund (provided you bought your Mac after 1-Oct). Obviously if you bought after the announcment and therefore you haven't paid anything then there is no refund as you didn't pay anything!

Page and iCloud, Page and iCloud

How use Page with iCloud ??

You will need to find a new hosting service - there are plenty to choose from - and upload your site to it. You can do this directly in iWeb '09 or above, or with earlier versions you have to publish to a local folder and use an FTP program to upload it. There are a few issue with not using MobileMe as several minor facilities won't work.
More details in this page:
http://rfwilmut.net/missing2

I've purchased an iPad 1st gen from gumtree an online buy sell and swap page and it's still got the previouse acc holders emai

Iwepurchased this iPad 1st gen I think model number a1337 and it's got the previousowners stufat still on it even after a full reset and my simbears inserted camass can you help me

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

I bought and downloaded pages and the icon was on my screen. It is now gone and i can't find it. Help!!

I need help finding my Pages download. I am new to Mac, I've always owned PC's. When i go to the app store it confirms that I downloaded Pages last night. I was actually trying it out last night. Today the icon is gone and I don't know where to find it.

ralph from el dorado hills wrote:
lvmedic3214,
Thank you, that worked. do you know how i can make it stay as an icon with the rest of the icons?
Or, While Pages is running, click and hold the Pages icon on the Dock and select Options > Keep in Dock.
Jerry

I hate iCloud mail: How could apple put out a product that is so unusable. I have spent 3 days of my time searching forums and discussion pages and I have found nothing to correct the problems. I cannot send or receive mail consistently on my notebook.

***. This is the lamest thing that apple has ever done. I wish there was someone to complain to but it is impossible to actually talk to someone. Why did they release I cloud if idoesn't work properly. Gmail is no better the integration of gmail with my Mail app on my mac book is ridiculous. All of my rules are out of whack. I tried changing them and searching for the problem but I can't find anything wrong with my rules. mail just ends up everywhere. A few months ago I loved my mail program, now I am so ****** off. Can Gmail and apple just shake hand and quit ******* there customers over with ****** software.

***. This is the lamest thing that apple has ever done. I wish there was someone to complain to but it is impossible to actually talk to someone. Why did they release I cloud if idoesn't work properly. Gmail is no better the integration of gmail with my Mail app on my mac book is ridiculous. All of my rules are out of whack. I tried changing them and searching for the problem but I can't find anything wrong with my rules. mail just ends up everywhere. A few months ago I loved my mail program, now I am so ****** off. Can Gmail and apple just shake hand and quit ******* there customers over with ****** software.

Panic Attaks and related freezes and hangs

I have been stumped by my computer freezing all the time at least 5-6 times a day. I bought Tech Tool Pro Deluxe and ran all the system suites, only minor finder errors reported and I fixed them. I optimized my hard drive, did a complete sector by sector scan and still the problems persisted. I them did a complete repartition of my 80 GB hard drive combining my two partitions back to one. I have about 27 GB of free space available after reloading my files and OS X 10.4.6 disk and then updated with 10.4.11. I get the panic attaks at random but my computer hangs mostly while on the internet using the apple internal modem and Safari and / or Camino. The system also seems to hang when I multi tasking applications or scrolling windows. Here is my latest panic crash log for yesterday and today
Mon Feb 11 16:27:09 2008
panic(cpu 1 caller 0x0009A0F8): mapping_remove: hwremmap failed - pmap = 03596A00, va = 0000000090000000, code = 243F9202
Latest stack backtrace for cpu 1:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x0009A0F8 0x00098EB4 0x00098C80 0x00066228 0x00037EDC
0x00039654 0x000397A8 0x000A9894
Proceeding back via exception chain:
Exception state (sv=0x009F9280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Mon Feb 11 17:04:28 2008
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x0000000036648040 PC=0x00000000FF89CA20
Latest crash info for cpu 0:
Exception state (sv=0x4255C780)
PC=0xFF89CA20; MSR=0x40003030; DAR=0x36648040; DSISR=0x40000000; LR=0x000A9EE8; R1=0xFC14F427; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
backtrace terminated - unaligned frame address: 0xFC14F427
Proceeding back via exception chain:
Exception state (sv=0x4255C780)
previously dumped as "Latest" state. skipping...
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x4255C780)
PC=0xFF89CA20; MSR=0x40003030; DAR=0x36648040; DSISR=0x40000000; LR=0x000A9EE8; R1=0xFC14F427; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
backtrace terminated - unaligned frame address: 0xFC14F427
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Mon Feb 11 21:26:53 2008
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x0000000036703040 PC=0x00000000FFFEABA4
Latest crash info for cpu 0:
Exception state (sv=0x4F180280)
PC=0xFFFEABA4; MSR=0x40009030; DAR=0x36703040; DSISR=0x40000000; LR=0x0002ACE8; R1=0x2C3E3D60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x02AEF868 0x00049814 0x000291C0 0x000233AC 0x000AC02C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x4F180280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x4F120280)
PC=0x9000B0A8; MSR=0x0200F930; DAR=0x36703040; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFBF20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x4F180280)
PC=0xFFFEABA4; MSR=0x40009030; DAR=0x36703040; DSISR=0x40000000; LR=0x0002ACE8; R1=0x2C3E3D60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x02AEF868 0x00049814 0x000291C0 0x000233AC 0x000AC02C 0x00000000
Exception state (sv=0x4F120280)
PC=0x9000B0A8; MSR=0x0200F930; DAR=0x36703040; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFBF20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Tue Feb 12 10:42:59 2008
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x0000000036703040 PC=0x00000000FFFEABA4
Latest crash info for cpu 0:
Exception state (sv=0x4F180280)
PC=0xFFFEABA4; MSR=0x40009030; DAR=0x36703040; DSISR=0x40000000; LR=0x0002ACE8; R1=0x2C3E3D60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x02AEF868 0x00049814 0x000291C0 0x000233AC 0x000AC02C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x4F180280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x4F120280)
PC=0x9000B0A8; MSR=0x0200F930; DAR=0x36703040; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFBF20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x4F180280)
PC=0xFFFEABA4; MSR=0x40009030; DAR=0x36703040; DSISR=0x40000000; LR=0x0002ACE8; R1=0x2C3E3D60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x02AEF868 0x00049814 0x000291C0 0x000233AC 0x000AC02C 0x00000000
Exception state (sv=0x4F120280)
PC=0x9000B0A8; MSR=0x0200F930; DAR=0x36703040; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFBF20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Tue Feb 12 17:05:21 2008
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000008F6B424 PC=0x0000000002BC6F00
Latest crash info for cpu 0:
Exception state (sv=0x42347280)
PC=0x02BC6F00; MSR=0x00089030; DAR=0x08F6B424; DSISR=0x42000000; LR=0x02BC6F00; R1=0x2C313420; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x02BC6F00
Proceeding back via exception chain:
Exception state (sv=0x42347280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3C51A780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0007): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x42347280)
PC=0x02BC6F00; MSR=0x00089030; DAR=0x08F6B424; DSISR=0x42000000; LR=0x02BC6F00; R1=0x2C313420; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x02BC6F00
Exception state (sv=0x3C51A780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Here is my NetZero crash log which is my ISP
Host Name: steven-lennis-power-mac-g4
Date/Time: 2008-02-11 13:25:18.524 -0700
OS Version: 10.4.6 (Build 8I128)
Report Version: 4
Command: NetZero
Path: /Applications/NetZero.app/Contents/MacOSClassic/NetZero
Parent: WindowServer [55]
Version: NetZero 1.0.1 (1.0.1)
PID: 151
Thread: 5
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xffffffff
This is just a snippet
Can anybody please help me. Do I have a bad CPU or Memory module that Tech Tool Pro is not finding?

Thanks for your help I'll give that a try.
In the mean time is there a way I can network my iBook G4 to my PowerMac and run programs using the iBook's CPU and modem but using the 17" Apple Studio Display connected to my PowerMac? In other words use the PowerMac as a file server and display terminal?
I have the two hooked up with FireWire cable and using AppleTalk I can access the iBook on the PowerMac but even though my PowerMac's drive shows up in the iBook's finder, I can't connect to it. And that doesn't really allow me to do the above operation anyway does it?

Transporting VC Models and related pages and iviews across portals

Similar Messages

Maybe you are looking for