Transporting Webservice DataSources -

Hi
We are unable to successfully transport any of our webservice Datasources, or anything related to them. The tansport logs are not giving any exact clue about why the error is occuring, and what we can do about it...
Is there any specific technique/ process to be followed for transporting Webservice Datasources?
Please give us some clue on this... as our transport is stuck because of this.
Thanks in advance.
Sushmita

Hi,
How about applying note 1035311? and please check note 942081 too.
Regards,
Masaaki

Similar Messages

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

New Webservice Datasource:Not Overwriting with old one in Production

Hi,
I have a Webservice Data Source which is loading XML based Data to DSO & Then to Infocube.
In development I it is working fine even Loading Delta perfectly. Then moved it production.
Again due to some client request I have made changes in Web Service Data Source & DSO & Infocube.It is also worked fine in Development. Again moved to production.
But after moving to production all objercts of DSO/Infocube changes are fine. Even Transformation/DTP is as it is with Development for upload from DSO To Infocube.
Issue : The New Webservice datasource is not overwriting Old one in Production even I capture in Transport request all changes correctly, same also applies Transforamtion/DTP too from Webservice Datasource to DSO..
I need How to Overwrite Datasource/Transforamation/DTP in Production with new objects of same in Development.
Please suggest.Need the steps in detail. It could be bug or some other issue which need to look into.
Regards,
Subhadarshi

That is exactly correct: Time Machine backs-up entire systems, not just data. That's how many folks back-up two (or more) Macs to the same TM drive without conflicts.
You cannot combine them.
From one Mac, you see only it's backups when you +Enter Time Machine.+
But you can see those from another Mac by holding down the Option key as you select the TM icon in the menubar, changing +Enter Time Machine+ to +Browse Other Time Machine Disks.+ Then you can browse, restore, or delete those backups normally.
You also need to know that TM backup processes on the new Mac will not delete the backups from the old Mac in the usual fashion. You'll have to do that manually (via TM, not the Finder), or bite that bullet and erase the drive.
To delete backups from the old Mac, +Browse Other Time Machine Disks,+ select the backup you want to delete from the "cascade" of Finder windows and click the "gear" icon in the Finder window's toolbar, then select +Delete Backup.+ You'll get a confirmation prompt, then one for your Administrator's password, then TM will delete it.
Usually the deletion will be very quick; but some backups will take a very long time to delete (if you exit TM, you may see a progress bar). Unfortunately, there's no way to tell which will be quick and which won't.

Question on transporting a datasource on R/3 side

I have enhanced the extract structure (added one new field) of a sap delivered data source in r/3. So how do I transport this DS? if I just transport the datasource (0FI_FM_2), does it also include the append structure(new field) automatically.
So Please let me know the procedure (step by step) to transport a enhanced datasource from DEV to QA...
Thanks in advance,
Points are assured....

Hi Kalyan,
If I enhance the extract structure of a datasource, I just have a append structure right?
Is it not enough to just transport the DS itself and the append structure?
Thanks,
Sirish.

Problem while transporting generic datasource to test box

Hi Gurus,
I am trying to transport Generic datasource from SCM Dev to SCM Test box. Datasource is created with custom table in SCM.
It is throwing me RC8.
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Mapping between data source ZGATPUPLOAD and source system TA6CLNT010 is inconsistent
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Field /BIC/ZCSHIPTO will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field CALWEEK will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field FIXPEGQTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field LOC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field MATNR will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field PROD_ALLOC_OBJEC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALESORG will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALES_DIST will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SIMID will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field USER_MOD_QTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
Reference to transfer structure ZGATPUPLOAD_CA not available. No activation possible.
Please give me suggestions....

Are you still looking ans on it?

Transport SOAP datasources

Hi,
I've problem with transport SOAP DataSource. I've created InfoSource, Create DataSource with SOAP, etc. always write package and request. Everything works OK.
But after import from DEV to QAS i've error:
"Extract structure ZOXPBW0027 is not active. "
and
"The extract structure ZOXPBW0027 of the DataSource 6AZKJ_XML_Z is invalid".
This extract structure of course doesn't exist in QAS.
In DEV when I check directory entry, error message appears: "Object directory entry R3TR TABL ZOXPBW0027 does not exist".
Is this structure generated for data source ? (has system name "PBW" in name)
Should I set request for extract structure and transport ?
Regards
Jarek

Thanks Edan,
I've made it. But extract structure in QAS can't be activated, there is 1 warning:
"Enhancement category for table missing ", I thing, there is no problem,
and few errors:
"Field /BIC/ZKJ_XML: Component type or domain used not active or does not exist"
"Field TXTSH: Component type or domain used not active or does not exist"
"Field name /BIC/ZKJ_XML lies in external or unknown namespace but is valid".
Field data type are /BIC/OW_BICZKJ_XML_OI and /BIC/OW_TXTSH_OI.
Domain for both is /BIC/VCHAR_000020_000000 and exists.
I can't change package and transport this data type because of namespace.
This data tapes have Generation flag.
Regards,
Jarek

Transport Error - Datasource not available in the target system

Hello exports,
-- We have a custom Inboject zvendor
-- text master data is coming from 0vendor
-- need to transport the datasource 80vendort of the datamart + some other objects along with it.
-- transport from CLDEV1 to CLQLT1
-- included: datasource 80vendort, trasnfer structure, transfer rules.
-- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
-- could you please suggest me if i have missed something in here.
Measures taken:
-- i have tried doing generate export data source in the CLQLT1 system also.
-- replicated the datasources for the self source system in CLQLT1.
-- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
Solution:
-- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
Wondering if this solutions would work. Is there any thing I am missing...?
Please suggest. Any suggestions are highly appreciated.
Thanks,
Sweatha.
Message was edited by: Sweatha Mohan

Hi Sweatha,
When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
Hope it helps and if it did, award me points...
--Jkyle

BI webservice datasource and informatica integration

Hi,
I have a requirement to extract data from Informatica using BI webservice datasource.
I haven't worked on webservice before and I am wondering if any one knows what I need to do on BI side and Informatica to successfully get the connection working and load data successfully to BI.
detailed steps will be appreciated.
thanks

Hi Bhat:
Just to clarify that the Web Service Interface enables extraction from XML files. To extract data using Informatica PowerCenter you need to use the BAPI Interface.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Apr 26, 2010 2:35 PM

Unable to add XML and Webservices Datasource in Crystal Reports

Hi,
when I am trying to add a Web service datasource upon clicking the XML and Webservices Datasource in Database Manager I get the following error.
Invalid Arguments Provided.
Details: Java server startup failure. Verify PATH (JDK), CLASSPATH, and IORFileLocation properties in the CRConfig.xml file. In addition, verify that you are using JDK 1.5.
I am using Windows server 2003 OS. Java is version 1.6. I tried the below things but none of them worked.
1.Edit the crconfig.xml file to add classpath and license information
2.reverted to java 1.5
3.uninstalled and installed the CR 2008 software. None of these worked. Please help.

Thanks Don but my issue is not proxy related.
I am not using a proxy though I am using a VPN to be in the network of the Webservice hosting server. Also, my problem is that I am not able to even enlarge the XML and Webservices Data source to add any xml or web service file let alone the one I want to.
Edited by: iamkhader on May 10, 2010 7:26 AM

Transporting SOAP Datasources

Hi Friends,
I have an interface XI to BW. Design and development completed in DEV. For this we used SOAP datasource (6AZSAP_XI).
I tried to transport datasource to QA from DEV. but i am unable to do it.
Please let me know the process. How can we do this. Some of the blogs saying that not possible to transport soap datasource to QA.
Then how can we do this. do i have to create in QA. or is there any other options. I don't have the create authorizations in QA.
Please help us on this.
advance thanks
Sati

Hi
Even im not sure about this transportation. But if you go thru the above discussion link..check "Pankaj Unhale" comments!!
you just need to transport your Infosource.
Also SAP Note: 858783
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383538373833%7d
Regards
Ramg
Edited by: Ramkumar Ganesh on May 17, 2010 8:20 PM

I want to transport 3 datasource can i transport at a time 3 datasources

hai
i want to transport 3 datasources can i transport 3 datasources at a time otherwise transport one by one. If transport 1 by 1 u can give same package and transport request
Thanks
ravindra

Hi Ravindra
Can you just make all the Data source under a single transport request and releas
that particular TR from Se01 and right click on the Tr u will get an option for relase
and chek the DS wether they are transported or not once its done then transport
the remaining part like Trules and ODS or CUbe and its update rules Subsequently.
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Error while transporting a WEBservice Datasource

Hi all,
I am trying to transport a web service datasource(PI data to BW) in testing system . But while transporting ,I get the following error in the logs of my transport request.
Error generating the Web service /BIC/CQZPI_KPI00002000
This is not an authorization issue as I have got the required authorizations from the basis team .
Can anyone please give me some solution to this error.
Many Thanks in Advance

Hi.
Did you checked the following notes to solve this issue?
1177867 Error while deleting Web service in BI After Import
1177005 Error while activating/deleting Web service in BI
1170688 DataSource: Missing replication in transport
Please check also if Myself connection was correctly set in your system.
538052 Maintenance of Myself destination in BW.
Please check if enough authorizations were assigned to user who is
transporting this request.
913944-Error RSDS 301 when you activate a Web Service Data
Please try to check the data format. Check if some fields are mentioned in
logs and set them to EXTERNAL before the transport.
Please try also to activate the DataSource in the source system and
then create a new transport request and transport it.
I hope I can be helpful.
Thanks,
Walter Oliveira.

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error while transporting Generic Datasource in R/3

Hi All,
I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
Extract structure ZOX**** is not active
The extract structure ZOX**** of the DataSource ZABCD is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
BC-BW (SAP Business Information Warehouse Extractors)
The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
Thanks,
RPK.

As you comment it is possible error was not include the structure in earlier TR.
You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
Add object from TR transported with error and the missed structure.

Fields missing from webservice datasource in SSRS

We are using a XML webservice as a datasource for SSRS. The webservice is returning the hierarchy of departments of our company.
The data is consumed by SSRS but some fields are missing.
This is (simplified) what is returned by the webservice:
<department>
<nr>1</nr>
<name>name1/name>
</department>
<department>
<nr>2</nr>
<name>name2/name>
<parentdepartment>1</parentdepartment>
</department>
etc
The field parentdepartment is missing from the fieldlist, even if I add it by hand it will be empty.
At this forum I found that fields are even skipped when the first item has an empty value for a certain field so the absence of a field in the first item must certainly be the
problem. Nr 1 has no parentdepartment field.
Is there a way around this like skipping the first department, we don't need it, or forcing the SSRS-datasource to add the parentdepartment field.
As it is used by many applications we prefer not to change the webservice to skip the first or add dummy values to the first item.

Typically if the field doesn't show up the CR can't figure out what type it is which means when we query the DB for the field type the client/server returns the wrong type or some type that CR doesn't support.
How is the field defined on the server?
Thank you
Don

Transporting Webservice DataSources -

Similar Messages

Maybe you are looking for