Transporting WebServices from Dev to quality to production.

Hi Gurus,
I have created custom web services in my dev system and i am wondering, if i need to create the WSDL's seperatley in QA and PROD systems (for the transported RFC or BPI in theses systems).
Reason being the WSDL in DEV system will point othe the RFC/ BAPI in the dev system only.
Is it required to create new in each system..
Please provide me your pointers.
Thanks and Regards,
Anto.

Hi there,
You are mixing two concepts together here.
ABAP components, JAVA components, COBOL components etc are pure SDLC components. In a SERVICE context they are service implementation application components not really the service itself. WSDL is the service contract.
What is all about a service is SERVICE interface, service messages, service data types, service ports, binding and service location.
In a well defined service life cycle methodologies there will be something called seperation of concern which should address how to associated service implementation component should transaport among application layers such as DEV,QA, PROD etc and how to transport service contract as service entities between different layers.
Service entities such as schema are layer independent entities so it should not have a specific layer dependency.
However when you bring all service metadata through a service contract such as WSDL you have to design the WSDL in such a way so that dependency can be minimized.
If you can look into details of Abstract WSDL and Concrete WSDL concept, you know the FACT except service location and binding there is not much depencency specific to a given layer such as DEV or QA.
Thanks

Similar Messages

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Can we move the Organisation structure from DEV to Quality to Production?

Hi Experts,
Can we move the Organisation structure from DEV to Quality to Production?
If yes, I believe that we have to change backend details at some areas.
Please any one provide procedure and precautions for doing this, In general how we have to proceed?
Thanks
Reshma

Hello Reshma,
See program documentation from PFAL transaction (ALE distribution of HR Master Data).
You will need:
- an evaluation path,
- a distribution models for sender DEV > receiver QUAL and sender QUAL > receiver PROD for correct message type.
Regards.
Laurent.

Transporting webservices from dev to qa

I transported our webservices from dev to qa. I generated all of the nodes necessary in SICF in QA and I activated the web services in qa, but all of the web services still have a WSDL with dev address. If I try to create the web service in QA, then it wants a transport.
I'm also having an issue with soamanager. When I put in tcode soamanager , I get the logon on screen dev. I can't seem to get anything to point to QA.
How do I get the webservices(WSDL) generated to have the qa address?

Hi Linda,
Only the definition is transported & not the config, this is default behaviour. You will need to complete the config again in Prod.
One reason for this is that the Config is client-dependant so SAP can't make the assumption to which client (in Prod) the config should be relevant to while transporting.
Regards, Trevor

Transporting data from Dev to quality using CMS

hi....Fri's
i am transporting data from development to quality, igetting this error
Workspace was not defined for software component version PROC_SA_PROJECT , 1.0 of unilever.com Assign the software component version in the Landscape Configurator of the Change Management Service to a track..
who will define the workspace for the SWCV, how can i rectify this error.....
thanks in advance
Pasi.

hi pasi,
just got to the link
http://host:port/devinf/main.
it will ask for cms user,get the details from basis.
afte login go to LANDSCAPE CONFIGURATOR
there select IR.REP and configure respective
consolidation,production .
please eneter in consolidation field " http://<quality host><port>/rep
and production field as "http://<production host><port>/rep
now select IR.DIR and configure similar to IR.REP and replace rep with dir
give consoldated system(QUALITY system) http://<quality host><port>/dir
and and production field as "http://<production host><port>/dir
now cms is done with configuring part
now add the software component which u want to export .
Thanks & Regards,
Rama Krishna

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Transporting variant from Dev to Quality

Hi All,
I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
I have released that one , But In the quality I am unable to see that one .
anybody please guide me.....
Thanks
Durga Prasad.

>
Durga Prasad wrote:
> I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
>
> I have released that one , But In the quality I am unable to see that one.
May be i am stupid to ask this, "Was the transport imported to QAS?" Please clarify ...
Because releasing the TR alone does not mean the changes will be reflected in the subsequent systems.

Aggregation level transportation from dev to quality

Hi,
I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

Hi,
you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
Brgds,
Marcel

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

Error while Transport objects from DEv to QA-File transport

Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.

Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.

Transport Error from Dev to QA.

Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request   : BD1K922532
System              : BQ1
tp path             : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SD

Hi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD

What is the best Method to transport KMC from DEV to QA & PROD

We are trying to figure out what is the best method to transport KMC from DEV to QA & PROD. Your help and feedback is greatly appreciated.
David

hi,
Refer this thread.
How to transport KM content and configration?
Regards,
Ganesh N

Problem when i transported DTP from DEV to QA

I am facing a problem when i transported DTP from DEV to QA It is not in the folder were it have to be,but i can see it in RSBKDTP table of QA

Hi,
One info regarding DTP, Technical name will get differ from system to system through out the landscape ( Dev, QA, Prod) . So you have to search with Description of the DTP instead of technical name.
Regards,
Sridevi.

Transporting workflows from DEV to QA

Hi I have three queries.
1. When we transport wokflows from Dev to QA the agent assignment for tasks does not get transported. For eg. If we set a task as a general task in Dev, it does not get transported to QA. What do I do to ensure that the agent assignment and the task classification gets transported.
2. Also when we transport the workflow, if our workflow is triggered by events, the event linkage is inactive.(header data for the workflow template). How do I ensure that the event linkage stays active after we transport the WF to QA.
3. How do I transport organizations assignments to QA (transaction PPOM, PPOC stuff). It does not create a transport request when we create a new org. structure, positions, jobs etc.
Help would be appreciated.
Regards.

Vijay,
All the questions have been answered a few times on the SAP-WUG forum. You can search the forums using Google. Type
<b><u>Search Term(s ) site:http://mailman.mit.edu/pipermail/sap-wug</u></b> and hit the search button.
Come back if you still need help.
Also please note that Business Process Management is now designated as the forum for Workflow questions.
Cheers,
Ramki Maley .

Regarding Transport request from system to file or product CD

Hello Gurus,
Can anyone tell me how to transport transport request from system to file or product CD.
It is urgent.
Thanks in advance.
Best Regards,
zubera

Hi Albert,
Thanks for your reply.
I want to know the steps how to tranport TP ( tranport request ) from system to file.
Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
Thanks in advance.
Best Regards,
zubera

Transporting WebServices from Dev to quality to production.

Similar Messages

Maybe you are looking for