Transporting with diferent source systems.

Hi experts,
I am quite new in BW.
I have been developing some thing in sap BW.
I have Development, integration and Production in both BW and R3 source system. Each one should be connected with each other. So, development with development, integration with integration and production with production.
Here comes my doubt. All i have done is in the development systems. Now I want to transport and i don't know how to do this c'ause I want all the same things but connected to a different source system, and I think that when i am transporting I will have the Integration Business Warehouse connected with the development R3 system.
What should I do to avoid this and transport all but with a connection with a different system? Can anyone give me a clue please?
Thank you all!
Artur.

Hi,
BASIS team will comfigure the connection betwen BW systema nd R/3 system for all three environments.
R/3    DEV     -
>            QTY   -
>             PRD
              I                              I                        I
BW    DEV    -
>            QTY -
>               PRD
for transports, source systems Transports (R/3 datasource and tables) will be transported to QTYand PRD systems
and
for transports, BW Transports (BW infoobjects, DSO, Cube, Transformations....) will be transported to QTYand PRD systems.
[CTS and BW Transports]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e]
Regards
Daya Sagar

Similar Messages

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

Multiple Schema Creation with One Source system Via SLT

Hi all,
we have BW on HANA environment at our company premises, with SLT server installed
So, my Question is that is it possible to create more than one schema in HANA system with one Source system
As an example, lets say, ECC (Client 601) Source System has been connected to HANA via SLT and created Schema called SCHEMA_1 and again i want to create SCHEMA_2 by connecting same ECC (Client 601) source System.
please help me to short this out?
Thanks
Mirana

Hi Mirana,
Yes, it is possible to create more than one schema in HANA system with one Source system.
Please go through the Official SAP LT document for more details @ page number 13
http://www.saphana.com/servlet/JiveServlet/previewBody/1811-102-5-5419/SAP_LT_Replication_Server_for_SAP_HANA_SPS05_Over…

Copy with change source system

Hi experts,
I have 3 logical system in 2 R/3 server . Let say TEST(Developing&Testing:server 1) PRD (Production server 2) and SIM (Simulation of PRD server 2).
and I have 2 BI server with respective logical system: BWD (Development) and BWP (Production).
The landscape is: TEST transport to PRD copy to SIM
BWD transport to BWP
BWD connected TEST, BWP connected to PRD.
All modeling and configuration have been done in BWD and were transported to BWP. Now my problem is how can test data from SIM? for this problem I intend to make connection between BWD and SIM because I don't want to test on BWP system. How can I make other transformations and DTPs for new datasources from SIM without create again all of them?
I hope you understand my issue and tell me the best solution. Pls ask me if you are not clear.
Best Regards
Nguyen Hieu Truc

Hi,
There is no other way as for a bW system updated through the two source system,you have two create two tranfer rules or for each data source.
Or you will have to create two transformation in the case of BI 7.0.
Targets will be same in each case for the data sources, I would suggest you to create and use the option Copy in each case.Give the template as the existing transformations in each case.This will reduce the work.
Thanks
Ajeet

Prevent objects being transported for Sandpit source system

Hi there,
We have a 3-tier systems landscape for BI: DEV, QAS, PRD (we do not have a sandpit BI). In our R/3 development system we habe two clients which are both setup as source system for BI DEV. One of the clients in R/3 DEV serves as sandpit in that system and objects can't be transported from it. However, since this client is connected to BW, objects related to this source system can be transported from BI DEV. We want to prevent that, so only the objects in BW DEV for the real R/3 DEV development client are allowed.
Is there a way in BI to configure a source system in such a way (other than via security roles/profiles), that objects related to this source system can't be transported?
Cheers.

Sander, you should post this in BASIS also. By posting in both the forums, you have a better chance.
In case BASIS folks say that they cannot stop this, try this work-around.
In BWQ, in RSA1, there is a Source System Mapping in one of the tools menu. There, your DEV is mapped to QAS, etc.
There, you may have your R/3 DEV mapped to R/3 QAS.
See if there is an entry for your R/3 Sandpit/Sandbox. If there is one, leave the mapping for it as Blank.
See, the only Objects that are related to Source System in BW are InfoSource-DataSources. If there is no mapping for SOurce System in BWQ, then the transport will fail.
This is just a thought.
Uday-Ram Chamarthy

BEx Integration with different source systems

Hi All
I know we can create BEx querys on top of an infoprovider. But instead of storing data into BW and creating reports using BEx tools can we integrate BEx with the other source systems. Like Business Objects tool which can be integrated with different sources. My client wants to know whether we can integrate with BEx for the following
Support data source -- SAP BW
Support data source -- Oracle
Support data source -- MS SQL Server
Support data source -- MS Access
Support data source -- MS Excel
Support data source -- ASCII Text files
Support data source -- XML/XSD
Support data source -- Web Services
Support data source -- SAP R/3
Support data source -- BO Universe
Thanks for letting me know your opinions

Hi,
in theory you can. You will still have a virtual provider on top of your Infosource which will be connected to your datasource; thus you'll have to create the structures; you'll have to load master data as well... so not so nice solution if you think that at this stage, the storage will be the less of your costs....
How are you going to deal with R/3 data?? I mean a great advantage of BW is really when you have an R/3 behind...
I'd rather consolidate all these disparate datasources using the Visual compsoer which can get this data out of nearly an datasource and merge them in one single report; in theory again you could implement all BEx functionalities but at which cost and effort??
Weird that a customer is asking such a question because it is usually the other way around: use SAP BW data in another front-end... by the way SAP is going to acquire BO soon....
hope this helps...
Olivier.

Transport collecting incorrect Source System.

Hi SDNers,
In my BW DEV i got source systems to both R3 DEV and R3 Production.
reason for this is that the data in Dev is not correct.
When i use transport connection it only transfers Source System from the R3 DEV and not R3 Prod. I need the Source System from Production and not Development. How can i force it to use Source system from Prod and not Dev.
Thanks.
Andre.

Hi
in the transport connection before collecting your objects maintain the source system assignment sceen (toolbar or Shift+F7)
hope this helps...
Olivier.

Using WAD with multiple source systems

Is there a way connect 2 BW sources to a dashboard built in WAD?
We have 2 BW systems in our global company. We want to create global metrics and the current strategy is to pull all data into 1 BW system and post.
There must be an easier way to pull a query from 1 BW system and another query from a 2nd system and post both results.
Without physically pushing the data into the backend.
Any ideas?
Thx,
Brandon

WAD won't be able to access from a different BW system other than the one you initiated the application from.
If you are using Visual Composer you could have done that, but another solution might be creating Remote Cube.
Check out this:
http://help.sap.com/saphelp_bw33/helpdata/en/26/39dc37bff7a66de10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/content.htm
thanks.
Wond

The transport track TR000003 (source system DEV-100) is locked

Experts:
I get above error when trying to create a transport request.
Could you help how to unlock it?
Thnaks!

Hi,
Just go in TCode SE01 and check whether your transport request is released or not.
If not than, first release the request.
Or Other case may be that it is a local change request and such request can never be transported.
Thanks
Deepak

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

"Conversion of Source System names after the transport" : O

Experts:
Environment : BI 7.0 and SP 12
<b>Tranports related to transformation rules are failing with inactive status...</b>
Further investigation on this, I have noticed that in our QA system, where "Conversion of Source System names after the transport" : O screen, we have columns
Original Source System, Target Source System, 7.0, Description(I guess, since no name is found)
Everything looks fine to me with reference to actual techinical names of source/target system...
My question there is a check box on column "7.0", which is UNCHECKED. Is this correct?
My understanding is that, this check box needs to be CHECKED, since this is related " Only Valid for RSDS, TRFN and DTPA Objects ". Is this correct?
If yes, Can I check this box in QA system, save and retransport my requests. If so, what happens to standard BW objects i.e., transfer ruels, update rules etc...
OR do i need to create another entry with same source/target system and check the 7.0 box.
OR do i need to create 3 entries with same source/target system and check 7.0 box for each entry i.e., RSDS, TRFN, DTPA.
Finally, please advise the exact steps that need to be taken here...pros and cons
Your inputs will be of great help....
Thanks,
BI
Message was edited by:
B I

Hi,
Yes you need to check the checkbox as it is related to Data sources and transformation and DTPs. you can mark the check box if your client is modifiable, if not you need to transport the setting from DEV. Go to
SPRO > Business Intelligence>Transport Settings--> Change Source system name after transport.
you also need to maintain the Source system IDs .
Hope it helps.

Transport: Multiple Source Systems in QA

Hi gurus,
I have developed in BW Dev Transfer Rules starting from one R/3 Dev Source System.
Now I need to transport BW Dev settings into BW QA system, where I have 4 R/3 QA Source Systems.
In RSA1 --> Transport Connection --> Conversion (F8) I can introduce only one record to map Dev Source System with QA Source System.
How can I define that the single Dev Source System must be translated into several QA Source System ?
Is it possible ?
Thank you in advance.
Riccardo.

Hi,
Import 4 times by having Different conversion Each time.
And another thing:
Have you tried to create 4 Conversions at a time with same Source of source system and importing with these 4 conversions at a time. Even I too feel that it would not work. But you should try atleast once.
With rgds,
Anil Kumar Sharma .P

Source System mapping while transporting objects from Q to P

Hi All,
I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems.
Now, I have to move all those transports to PROD and I found out that they will be moved from Q to P and not from DEV to P. In such case, what source system mapping should I maintain in P? Is that R3Q to R3P or R3R to R3P?
Hope I am clear with my question. Please let me know if it is not clear.
Thanks,
RPK.

Hi Nasiroddin,
Itseems I am not clear with my question. Let me put it in another way.
My BWQ is connected to two R/3 source systems, say R3Q and R3X where as my BWP is only connected to R3P. While transporting the requests from BWQ to BWP, I know that I have to maintain the source system mappings(Tools->Mapping of the source system names). Now I am in doubt about what mapping do I need to maintain(either R3Q->R3P or R3X->R3P)? Which source systems transfer rules etc.(all source system dependant objetcs) will be transported, either R3Q or R3X?
Thanks,
RPK.

Transports from BW ....source system in transports

Hi,
In R/3 i created Z data source and transported to Test system.
In BW i created entire stream of z objects (Info Objects, Cube, ODS, Update Rules, Transfer Rule...etc)
Can you please update me what are the objects i need to transfer...Bcaz i am bit cinsused with the source system.
If i cant transfer source system...do i need to map the transfer rules again in test system and do i need to assign the source system to info source...
Please update me on this
Thanks

Hi,
Source system is not transported but if you transport InfoSource, transfer rules and infopackages and you have mapped the source system conversion objects will be linked to your PROD source system.
Dont remember now.... but think even with source system included in the transport request you will have a warning message in STMS saying source systems are not transported
Regards,
Carlos

Webservice source system transport

Hello,
I have created a Webservice source system in our development server. Also it has datasources created.
The transport request containing the source sytem fails with the error message saying
Source system GPU_WBSRV does not exist.
But I have included the source system in my transport request.
The transport request keeps on failing with this message.
Workaround performed by me:
I created the source system with the same name and settings in the Quality server and then transported the same request.
The transport went through successfully and the datasources and other objects for the webservice were also transported under that source system. So all looks fine....
But now if i transport the same requests to my acceptance box...it fails with the same error. so after creating the source system in acceptance box when i transport the datasource , the modified version of datasource is seen. The datasource does not get activated no matter what I do.....
Please suggest me with your valuable inputs..as I have explored the webservice datasources for the first time.
- Amit

Error message :
Screen output without connection to user .
Error when activating DataSource DS_SUBCOMPDET GPU_WBSRV

Transporting with diferent source systems.

Similar Messages

Maybe you are looking for