Transports between systems after support package application

Hi gurus, we need to apply a lot of support packages into the development system and I wanna know if in the meantime we need to "freeze" all transports between systems.
This because the systems (DEV - QA - PRD) are in differente support package level. This until we apply the support packages into the others systems
Thanks in advance.
Ronald.

Yes, any transport which is taking SAP standard code from DEV to QA to PRD should not move if the systems in landscape are on different support pack level. Because it can happen that SAP has done some modification to that standard code in new support pack.
However, anything which is isolated Z-development (like some z-output report or smartforms) can proceed.
But, I suggest , stop moving transports until all systems have same support pack level.
G@urav.

Similar Messages

  • Embedded BI - System Upgrade, Support Package application and so on

    Since Netweaver '04, SAP R/3 and SAP BW/SEM were separated system.
    Now, with Netweaver 2004s and the "embedded BI", they are unified on the same installation.
    1)The upgrade operations for R/3 and BW are separated or in the same package?
    So, support package installation is cumulative?
    2)When R/3 is down for upgrade/support pack---> BW is Down?
    When BW is down for upgrade/support pack---> R/3 is Down?
    3) System crash is cumulative?
    Points for every useful answer,
    Thank you, Claudio

    The whole scenario depends upon if you are using embedded BI or a stand alone BI.
    1)The upgrade operations for R/3 and BW are separated or in the same package?
    So, support package installation is cumulative?
    In either case upgrade operations are separated
    2)When R/3 is down for upgrade/support pack---> BW is Down?
    When BW is down for upgrade/support pack---> R/3 is Down?
    embedded BI -  Yes as being on the same instance
    stand alone – No, upgrade is independent on a technical/application standpoint
    3) System crash is cumulative?
    embedded BI - Yes
    stand alone – NO

  • Undoing changes made by support package application

    Hi
    Is there a way to undo changes made to repository objects and dictionay objects after you have imported a support package.
    Let us consider this with an example. Let us assume that there is a standard SAP report called S1 v1. Which after a support package application and after confirming the queue it becomes S1 v2. Now if for some reason after say 2-3 days we are not comfortable with S1 v2 and want S1 v1 again can we get back the old standard SAP report. If so then how?
    Also if there is a change made in a Dictionary object, is there a way to revert these changes on a similar line? Id so then how.
    Thanks
    Rohan

    Hi Lokesh,
    If you have maintained versions for perticular report then you can revert it back to the previous version.
    Ask your ABAPer for the same.
    You can always retrieve the previous version if you have maintained the version.
    It is applicable for the dictionary objects too, but you may loose data in case of changing version for database tables.
    Regards,
    Payal

  • Difference between database, websheet and packaged applications

    Hi,
    Can any one explain the difference between database, websheet and packaged applications?
    So far i have worked on database application and not aware of the other applications.
    Regards
    Narender B

    Narender wrote:
    Can any one explain the difference between database, websheet and packaged applications?
    So far i have worked on database application and not aware of the other applications.
    This is fully covered in the documentation:
    About Database Applications
    About Websheet Applications
    About Packaged Applications
    There is little difference between packaged applications and database applications, other than that packaged applications are supplied by Oracle and database applications are created by you.

  • Post Processing Steps after Support Package Stack Application

    I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server).  We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems.  We also applied the J2EE stack and appropriate SCA files to the NWDI server.
    After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them).  Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE.  Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files.  We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type.  Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

    I think I'm missing something.  Now I see the code and DC's inside the DTR.  However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them).  Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR.  What things can I look at to determine what I'm missing here?
    Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA.  We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR.  After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws).  When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
    Message was edited by:
            Eric Vota

  • Transport failure in QAS system after support pack stack 9 upgrade

    We have a DEV->QAS>PRD ECC system landscape. Recently we upgraded our DEV, QAS and PRD system to support pack stack 9 (with Kernel level 137). After the upgrade, we got transport failure in QAS where it shows pink colored down arrow which shows unable to open import queue when I click on it under stms import overview. If I put back the old kernel (Level 69), transport works just fine. DEV is the TP domain controller. When I run the RTPTEST in QAS, it show sthe follwing info:
    RFC Destination
    Destination CALLTP_WindowsNT
    tp Path E:\usr\sap\QAS\DVEBMGS02\exe\tp.EXE
    tp Executable Size: 10.352.432 bytes
    RFC Ping Error when opening an RFC connection
    tp Call
    RFC Link Error when opening an RFC connection
    tp Version
    DB Connect
    Offline Call Error when opening an RFC connection
    I will greately appreciate any input to resolve this issue.
    Thanks

    You need to upgrade two component of your kernel  tp and R3trans
    Also perform an additonal test with new kernel
    cd /usr/sap/trans/bin
    tp connect <SID> pf=TP_DOMAIN_<SID_DC>.PFL
    If you have issue to connect it means there is some issue with tp tool and/or connectivity
    Cheers !
    Manish

  • Error getting in useradmin after support package issue!!

    Hi all ,
    We have just upgraded our support package for Bi_JAVA and other.According to our BASIS guy the package installation is through.
    But when i checked the portal-----user adminnistration , iam getting the below error.
    500   Internal Server Error
      Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.task.IRequestTask.isUsrLogoffRequest()Z
        at com.sap.portal.pb.PageBuilder.wdDoExit(PageBuilder.java:203)
        at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoExit(InternalPageBuilder.java:169)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doExit(DelegatingComponent.java:112)
        at com.sap.tc.webdynpro.progmodel.controller.Component.exitController(Component.java:255)
        at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
        ... 27 more
    See full exception chain for details.
    Correction Hints
    The currently executed application, or one of the components it depends on, has been compiled against class file versions that are different from the ones that are available at runtime.
    If the exception message indicates, that the modified class is part of the Web Dynpro Runtime (package com.sap.tc.webdynpro.*) then the running Web Dynpro Runtime is of a version that is not compatible with the Web Dynpro Designtime (Developer Studio or Component Build Server) which has been used to build + compile the application.

    Hi
    Check SAP Note : 869852
    I think it UME is not correctly installed
    After upgrading your system to a newer SP, you get one of the following
    exceptions when executing the UME WD application:
    o java.lang.NoSuchMethodError:
    com.sap.security.core.wd.umeuifactory.wdp.I
    ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
    ring;
    Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
    ring;Ljava/lang/String;)Z at
    com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
    Init(MaintainGroupComp.java:787)
    In order to avoid this error, perform following steps:
    - Open the SDM tool and undeploy all components starting with
    "tc/sec/ume/wd/..."
    - Go to your downloaded SP archives and find the UMEADMIN*.SDA.
    Redeploy it.
    Regards
    Krishna.

  • Error message ME006 order locked after support package

    we went to a new support package this weekend and shortly after we have errors about locked documents error ME006
    it is programm RVV50R10C
    VL10X
    I tried to change the number of tries from 100 to 1000 but had no effect ?
    does anybody know how to resolve this ???
    kind regards
    arthur

    Hi
    Check SAP Note : 869852
    I think it UME is not correctly installed
    After upgrading your system to a newer SP, you get one of the following
    exceptions when executing the UME WD application:
    o java.lang.NoSuchMethodError:
    com.sap.security.core.wd.umeuifactory.wdp.I
    ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
    ring;
    Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
    ring;Ljava/lang/String;)Z at
    com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
    Init(MaintainGroupComp.java:787)
    In order to avoid this error, perform following steps:
    - Open the SDM tool and undeploy all components starting with
    "tc/sec/ume/wd/..."
    - Go to your downloaded SP archives and find the UMEADMIN*.SDA.
    Redeploy it.
    Regards
    Krishna.

  • CRM 5.0 - Middleware issues after Support Package installation

    Hi experts,
    after upgrading the support package (from version 11 to version 17) we are facing a lot of issues.
    1. We need to synchronize custom tables from CRM to R/3.
    Can you give me an example on how to configure table SMOFQFIND/CRMMAPTAB for inbound queues CRI*?
    We know we have to do but we don't know how.
    2. We need to synchronize standard tables from R/3 to CRM.
    Do you know we have to do some new configuration in SMOFQFIND/CRMMAPTAB  table?
    With the older version of SP we were'nt asked to configure those tables.
    It has worked up to now
    Thank you in advance
    Emanuele

    Hi,
    We have the exact the same issue her using the 0DAT variable to restrict to the system date (in the filter process of the APD).
    Did anyone resolve this issue?
    Thanks,
    Fabian

  • Side effects in SAP BW after support package upload

    Hello!
    I would like to ask whether do You know any side effects executed by installing of a support package (18 and 19)  in SAP BW 3.5.  If so, should any preventive steps be taken before, to avoid those errors.
    Many thanks
    RW

    Thank You for Your answer.
    What I was looking for were all the activities, that are necessary before uploading of a new support package to avoid possible system errors afterwords. As I read on the forum, there are some errors following the SP upgrade like:
    - user can not use some program variants any more
    - customer exits show error messages, because some tables from the base are changed
    - descriptions of new activities in IMG customizing are missing
    etc.
    Well it seems, that the only thing the user can do is to upload SP patches in the correct order and with an exeption of the last one released.
    RW

  • Batch process is started for DTP's-After Support package upgrate...

    Dear All,
    we upgraded with SP19 in our BI systems,
    After patchs are completed when we run the dtp's either through process chain or normal triggering also dtp is shows still yellow for long time for all the cubes dtps...dso dtp....any dtps....
    Message as follwos...
    Extraction DataSource XXXXXXXX: 303 Data Records
    Prepare for Extraction
    Beginning extraction request REQU_D433FLO6MSZEOFHIR1SUOMBSP...
    Extraction Completed
    Waiting for free batch process...
    Batch process started
    then it is alwys shows yellow only even there is single records in Datasource...any help please...

    Thanks for the quick reply!
    We currently only have one of the notes implemented (1277550) and that one does not fix the problem, but it makes the yellow processes turn red (which is what it claims to do in the note description as well).
    However, we have days where everything runs fine and we have days where we run into this issue. Therefore it is hard to test and before implementing this one additional note, I was curious whether there was anything else that you guys did to fix the problem. I am glad to hear that those two notes together should take care of the problem. We are implementing it right now.
    Thank you!
    Dennis

  • Error in Solution Manager Optimizer after support packages

    HI all,
    after patching my SAP Solution Manager from SP18 to SP25, MOPZ doesn't work because there is this error in web page:
    Error when processing your request
    What has happened?
    The URL http://<fqdn>:<port>/sap/bc/webdynpro/sap/wda_mopz_plan/ was not called due to an error.
    Note
    ■The following error text was processed in the system SLM : CREATE OBJECT: The class \CLASS=/1WDA/L0STANDARD\CLASS=CL_LINK_CHOICE was not found.
    ■The error occurred on the application server srvslm_SLM_00 and in the work process 0 .
    ■The termination type was: RABAX_STATE
    ■The ABAP call stack was:
    Method: CREATE_BY_VIEW_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
    I've found that web dynpro WDC_MOPZ_CORE has a syntax error if a try to generate it.
    The error is:
    Web Dynpro Comp. / Intf. WDC_MOPZ_CORE,Web Dynpro Component Controller COMPONENTCONTROLLER
    Method ADJUST_XML
    Method "ADJUST_STACK_XML" is unknown or PROTECTED or PRIVATE.
    Here the ABAP codes:
    method ADJUST_XML .
      DATA lv_editable TYPE abap_bool.
      wd_this->mo_controller->crm_adapter->is_editable(
      IMPORTING ev_is_editable = lv_editable
      CHECK lv_editable eq abap_true.
      call method wd_this->mo_xml_manager->adjust_stack_xml.
    endmethod.
    There are no inactive objects as described in oss notes and I've tried to apply also notes 1548530 & 1485385 but with no luck.
    Could you help me ?
    Thanks
      Maurizio Manera

    Hello Mr Manera,
    It is a known issue that the activating errors or issues with the objects in the common correction notes happen when the upgrade is done to SP23, notes applied, then upgrade again to SP25 or SP26.
    The usual way to deal with this kind of error is running SPAU, letting the note go into an inconsistent state, then applying again the new version of the note. This may require to completely deimplement the common correction notes then implement them again.
    Have you tried doing this?
    Best regards,
    Miguel Ariñ

  • Generate transport between systems

    Hello experts:
    I need to transport a report from one system to another, how can I do this?
    And there are several transport request, is necessary to transport all of them or just the last?
    Thank you in advance for your help.
    Best regards,
    Miriam

    Hi Miriam ,
    I hope there is no transport path defined between the devlopment servers you are talking about.These are two different systems which have no connection in between.
    In this case you need to get the data and co files from the sap trans directory and move the objects into the new development server manually.
    You need to add the paste the K and R objects into the data and co file folders.
    Then in smtp_import you need to manually add the request ( there is a option of adding the request manually ) and then you need to transport it.
    It will get ur report from any other system into a entirely new system.
    Hope this solves ur question !!
    Regards,
    Anuj
    Edited by: ANUJ SRIVASTAVA on May 8, 2009 1:08 AM

  • Translation Worklist and Support Package application

    Can anyone explain me what'll happen with a published Translation Worklist when I apply a SP? Will it lose the translated texts?
       Do the worklist keep the translated texts or they are loaded from the objects every time? If the second is the right, they'll be lost when I rewrite the objects, correct?
       Thanks for any help.

    Hi Denis,
    > Where the translated texts are stored? They are stored only until we publish the
    > translation and then if we re-activate the worklist they are reloaded from the
    > objects?
    That's exactly what I would think for different reasons, but it's not that hard just to test it, isn't it?!
    Best regards
    Detlev

  • Differences between XI Support Packages

    Hi everyone.
    Can anybody tell me what are the differences between different XI support packages.
    I have SP09 and i would like to know new features in SP14.
    Thanks.

    Hi Inigo:)
    you may have a look over here:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/084c42ff13b430e10000000a155106/frameset.htm
    I'll add this link to the XI FAQ in a moment:)
    Regards,
    michal

Maybe you are looking for