Transports. (Copy as per transport request from one client to another)

Iu2019ve enhanced the datasource 2lis_13_vditm with required fields in client 100. I removed hide check box for the fields and activated the datasource. Iu2019m maintaining three separate requests one for deactivation, second for activation and third for datasource modification.
In order to reflect these changes to client 200, I run SCC1 and copied the requests from client 100 to client 200. Iu2019m wondering these changes are not reflecting into client 200. Still Datasource is inactive in client 200 and active in client 100.
Advance thank you very much

Hi Sharsha;
Please run SCC1 and select "including Request Subtasks".
Don't forget any transport request.
Regards;
Ricardo

Similar Messages

  • QM master Data copy from one client to another client

    Hi QM guru...
    Kindly suggest me how i will copy all  qm master data  from one client to another client
    QM master Data like....Catlogs. MIC inspection method. sampling...etc
    Kindly suggest me how i will copy all master data
    Thanx
    Regards
    Akil

    Dear Akil,
    I think that LSMW can be of help in this case.
    Otherwise, please check with your ABAPer whether any BDC is there for mass uploading of master data.
    Regards,
    Kaushik

  • Moving object from one client to another using transport requests...

    Hi,
    If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
    Regards,
    Rajesh

    Hello Rajesh
    If the two systems share a <u>common</u> transport directory then you can simply go to transaction <b>STMS</b>, double-click on the <b>import queue</b> (target system), then choose menu <b>Extras -> Other Requests -> Add.</b>
    The transport request will be added to the import buffer. Next you can import the request.
    If the two systems do not share a common transport directory you can use RFC-enabled function module <b>EPS_FTP_PUT</b> to copy the data and cofile from the source to the target system (check for <b>DIR_TRANS</b> directories using transaction AL11).
    Regards
      Uwe

  • Move transport requests from one landscape to another

    HI Gurus,
       I am facing a situation where i need to import the Transport Request from one landscape to another.
        Consider i have two  landscapes DE1 TE1 PE1  and  DE2 TE2 PR2. and both the landscapes are on
        different release.
         I have created a Transport Request DE1Kxxxxxx.
         And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
       How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
    Please guide me.
    Thanks in Advance,
    Sachin Kumar.

    Hi,
    Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
    warm regards
    Harish K Reddy

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • Transporting Course Catalog from one client to another

    Hi Experts,
    Can we transport LSO Course Catalog from one client to another or from development server to QA Server? If yes please somebody help me how to do that? Appreciate your efforts. Thanks
    Regards,
    FS

    Hi,
    You may use report RHMOVE30 and try creating a transport request manually.
    Use object type as course group (L) and type all of the course group numbers as object id.
    Then select evaluation path as L-D.
    Please try.
    Another option is to create an LSMW for creation of the course groups and types and the relationships between them.
    Regards,
    Dilek

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Transport sap query from one client to another client

    Hi,
    how to transport the sap query from one client to another client.
    Moderator Message: Basic Question
    Edited by: kishan P on Sep 15, 2010 3:39 PM

    use report "RSAQR3TR"
    Moderator Message: Do not answer such basic questions
    Edited by: kishan P on Sep 15, 2010 3:44 PM

  • Error while copying GL Accounts from One Client to another client

    Hi,
    We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
    File /usr/sap/DEV/SYS/global/FBISABC is being checked
    Session 1 session name RFBISA20 : No terminations have been found
    However, at the same time we are getting following error message:
    File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
    Message no. SG001
    Diagnosis
    No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
    Procedure
    Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
    Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
    Thanks,
    Sanjay

    Dear Sanjay,
    Did you check the batch-input? SM35
    It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found.  (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
    There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
    Kind regards
    Maike
    Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
    Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM

  • How to copy a physical Alias table from one rpd to another

    Hi
    I am copy pasting the physical tables from one rpd to another. I first copied the physical table and then tried to copy the alias table i get the message ' Unknown Error' when i click ok it says
    'Failed to copy from clip board"

    Identify the "class=MyStyle" string in the MTML code, and use the Multi-File Find and Replace feature to step through each topic and change the specific instances to "class=MyOtherStyle." (I doubt that you'll want to "Replace All".)
    Sorry, there's no silver bullet!
    Good luck,
    Leon

  • Copying a Single BEx Query from One Infoprovider to Another

    Is it possible to copy just a single query from one Infoprovider to another?
    I know how to copy all of them at once, but I want to know if there is a way to do it just for a single query.

    Ah.  That worked perfectly.
    Awarding points.
    Thank you.

  • Transfer data in the Ztable from one client to another client in a same ser

    Hi all,
    How can i transfer or move data in the Ztable from one client to another client in a same server .
    Thanks
    Ajay

    hi,
    create a transport request (Workbench type) and add the following line into the transport request:
    R3TR TABU name_of_table
    save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
    When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
    hope this helps
    ec

  • How can I move particular users from one client to another client

    Hi, I am trying to find a way to move few or many user from one client to another. Is there a transaction available or program to move them. e.g. there is a SCC1 available to move transport only from one client to another without going through TMS.
    Is there any trick available ?
    thnx in advance

    closing this one. thnx

  • How to transfer table data from one client to another client?

    How to transfer table data from one client to another client?

    Hi,
    Look at the Blog
    /people/community.user/blog/2007/01/07/transport-table-entries
    Regards
    Sudheer

  • How can I transfer sapscript from one client to another

    Please tell me the steps , how can I <b>transfer</b> SAPscript from one client to another (like DEV Client to Test Client)?

    Hi,
    Utilities --> Copy from client.
    If you have to copy from once system to another use Program RSTXSCRP
    Regards,
    Satish
    Message was edited by:
            Satish Panakala

Maybe you are looking for

  • HP LaserJet Pro 200 M251nw

    Everything installed.  Printer directly connected to computer and works fine.  Wireless connected no problem with my laptop.  However having a problem with eprint.  Seems unable to connect to web.  Connection error 500.  Check the internet connection

  • Making an ASCII file into a text file

    Hi- I am trying to read the lines of an ASCII file as Strings and write them to a new text file. Eventually I will modify the info in the lines, but for now I'm just trying to get the flow from one file to another. I can't figure out how to write a S

  • How to share variable between

    HI, I want to write a program with two classes, and there is a variable that should be shared between these two classes. I don't know how to realize the sharing. Thanks

  • MEP Partner In Sales Order

    Hi, what is MEP partner in sales order.   Is this assigned to customer in customer master. please tell the table and fieldname. Thanks,

  • TS2634 how do you unlock your ipod touch when it is disabled

    how do you onlock your ipod touch when it is disabledand it says connect to itunes but when you connect to itunes it still wont unlock it.