Transports from BW ....source system in transports

Hi,
In R/3  i created  Z data source and transported to Test system.
In BW i created entire stream of z objects (Info Objects, Cube, ODS, Update Rules, Transfer Rule...etc)
Can you please update me what are the objects i need to transfer...Bcaz i am bit cinsused with the source system.
If i can’t  transfer  source system...do i need to map the transfer rules again in test system and do i need to assign the source system to info source...
Please update me on this
Thanks

Hi,
Source system is not transported but if you transport InfoSource, transfer rules and infopackages and you have mapped the source system conversion objects will be linked to your PROD source system.
Dont remember now.... but think even with source system included in the transport request you will have a warning message in STMS saying source systems are not transported
Regards,
Carlos

Similar Messages

  • Client transport from one sap system to another one

    When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

    Hi Damian,
    It is not recommanded to import TRs from SAP system not at equal level.
    Get both the systems at same level if possible.
    But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
    Regards,

  • Test System (BQ1) Objects showing up wrong Source System after Transport.

    Hi Experts,
    We are working on IS-U BI7.0 Project. We have finished with our Development and have transported the DataSources, Transformations and DTPs from Development (BD1) into Test (BQ1) Systems.
    We have entered values in the Conversion of Logical Source Systems correctly.
    When we select the DataSource and Click Object Directory Entry from the Extras Menu, we found that the Original Source System is defined as BQ1 instead of BD1 (Development System), which is where the Object is getting Transported from.
    We have implemented an SAP Note:1008633 (Incorrect Source System after Transport (RSTRAN 514) but couldn't resolve the issue.
    We basically want all the Objects in the BQ1 (Test System) showing the Original Source System as BD1 (Development System) but only the DataSources and it's connected Transformations and DTPs are originating from the BQ1 (Test) System itself (The Transformations when Transported from BD1 to BQ1 are Transported with a different Technical Name which is very strange).
    Had anyone faced similar problem and if so, what was the effective solution implemented.
    Any help in this regard is very much appreciated.
    Thanks in Advance.
    Best Regards,
    Chandu.

    It is resolved by our Basis.
    Thanks,
    Chandu

  • Locationg source system object  transport request number in target system .

    Hi,
    After the object is pushed from source system to target using SCC1 for cross clients but same systems or STMS for cross-systems, if we want to see the object's source system's transport request number in the target system, how can we see that ?
    Regards,
    Rajesh.

    Hi Rajesh
    If my understanding is correct you want to know the source server in the target system( i.e where we have transported).
    For cross-system objects, as you know we use STMS to transport them...
    In the target system:
    1. SE10
    2. Click on Transports button.
    3. Select the required request and expand the node.
    4. You will have the first one which has log only for Export.
    The node with only Export log is the source system...
    Hope this helps...
    Kind Regards
    Eswar

  • Copy Transferrules from one source system to another

    Hi everybody,
    we're uploading data from nearly 25 sourcesystems (including separate systems and systems with more than one client to extract from) via flat-file. The source-system exports data to a shared file directory and the bw-system reads it from there. Though this results in only <b>one</b> transferrule for all source-systems, it keeps generating problems every time upload is due.
    Somebody had the idea to switch to 'standard' R/3->BW method of data staging, using generic extractors and so on. But this will result in <b>25</b> transferrules which, I'm afraid, have to be set up and maintained seperately. As there's quite some coding in the rules (the transfertructure in fact has 241 fields), flaws are for sure!
    We know the trick of exporting a transferrule, changing the source-system-mapping and re-importing the same transport-request. That can be used to copy to one or two other systems, but not for 25.
    Does anybody know another way to copy a transferrule from one source system to multiple other source systems?
    Looking forward to your answers
    Thanks and Regards
    Robert

    Hi Ralph,
    I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
    What do you think of the following idea to solve the issue a totally different way:
    All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
    The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
    The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
    This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
    Regards
    Robert

  • Modelling the fields in the cube from different source system.......

    Hi,
    I need to create one query on the cube.
    User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
    These are master data fields ( 7 fields in total) from other source system.
    Cube gets data from one ODS.
    some steps I need to do are :
    1) create new source system
    2) Create corresponding objects in BW.
    3) Model the things in ODS and cube
    Can somebody let me know what is the best way/steps to model such scenario.
    Thanks, Jeetu

    Hi,
    Replicate both the data sources to BW.
    Create 2 infosources/transformations, map them to respective fields and infoobjects.
    Now assign them to cube and load the data
    hope this helps.
    Rgs,
    I.R.K

  • How to merge key field from external source system with SAP R/3 master

    Hi,
    In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
    This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
    To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
    0GL_ACCOUNT      Short Description     Source System
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW  ZDSO_FI-
    GL_file      Key Figure1
    400          789
    200          567
    Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
    0GL_ACCOUNT      Short Description     Source System
    400
    200
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
    Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
    Thanks in advance.
    Nirmit

    Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

  • Error message from the source system, Caller 09 contains an error message.

    Hi,
        Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.   "
    Can any body help me out of this situation what to do and how to resolv ethe problem.
    Thanks and Regards,.
    Taps....

    Caller 09 is a very common issue - please search the forums before posting....
    Arun

  • No Idocs arrived from the source system.

    Dear All,
    Please read this issue carefully.
    Error Message is that
    "No Idocs arrived from the source system."
    In the Details Tab:
    Trasnfer( IDOCS &TRFC):Missing Messages or warinings.
    Request IDOC:Application Documnet posted from BW side and it is green..There is a request BW IDOC number  sent to R3.
    Where as an InfoIdocs 1:Sent not arrived :Data passes to the Port is ok.
    Here i can see there is one idoc frm  OLTP R3 side ansd no incomming idoc for BW side
    I went to r3 side bd87 and found that idoc is posted well with status 53.
    This is happing in Bw for each iinfopcakage is running?

    Hi,
    go through this link...
    [https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noidocsarrivedfromsource+system&adv=false&sortby=cm_rnd_rankvalue]
    System.-> Check RFC connection and clear/process stuck IDOCs.
    Idocs Missing or No Idocs arrived from source
    For this check the TRFC que(SM58).If any Idocs r strucked up there execute them manually.checkin sm58 transactions, you can check the status of your Idocs using BD87 in R/3. Idocs may not be processed because of load on system. You can process them manually from context menu.
    And go to BD87 to process the idoc's ..
    check which idoc has to process...select the idoc and click process ..Then It will push the data into the data targtes,
    Hope it will help you;
    regards,
    NR

  • Want to transfer data from 2 source systems

    hi everybody ,
    i want to transfer data from 2 source systems into a info cube, how can we do that and  i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?

    Hi
    The solution given by Paolo will not work 100% correct.
    Even if you create ODS and with record number as key of  ODS the data in ODS will be record no 1,2,3,4,5,6,7
    But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
    For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
    Have a look at SDN threads on compounding-
    Re: Compounding
    Re: Tips on Compounding with Source System ID
    Hope it helps
    Regards
    Pradip
    (don't forget points)

  • R/3 connection to BIW - No Idocs arrived from the source system

    Question,
    Hi Team,
    I have issues during loading attribute data from R/3 source system to BI,
    I go to the path
    Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
    Later I select the following options
    Full Update = select
    On the Processing tab page, select only PSA.
    On the Schedule tab page, choose Start Data Load Immediately and start the data load.
    Till here everything is in active version and saved, and connection to the source system is active and working fine.
    However when I do loading I received following messages, what I observed in Monitor window,
    Data was requested OK
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    No Idocs arrived from the source system.
    When I go to detail tab, under transfer section, I receive the following message
    Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
    But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
    But when I chose to run the transformation I donu2019t get data here,
    Kindly help me to resolve this issue,
    Regards,
    BluSKy

    Hi,
    the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
    i am not sure about transactions settings about r/3 side,
    could you plz throw some light on this issue,
    regards
    blusky

  • Transaction Data from multiple source systems

    Hi BW,
    I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
    Please someone should help me out with the best practice on this.
    Thanx.

    Hi Dan,
    Do you mean use 0LOGSYS as authorisation relevant InfoObject?
    Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
    Regards.

  • SLT Replication for the same table from Multiple Source Systems

    Hello,
    With HANA 1.0 SP03, it is now possible to connect multiple source systems to the same SLT Replication server and from there on to the same schema in SAP HANA - does this mean same table as well? Or will it be different tables?
    My doubt:
    Consider i am replicating the information from KNA1 from 2 Source Systems - say SourceA and SourceB.
    If I have different records in SourceA.KNA1 and SourceB.KNA1, i believe the records will be added during the replication and as a result, the final table has 2 different records.
    Now, if the same record appears in the KNA1 tables from both the sources, the final table should hold only 1 record.
    Also, if the same Customer's record is posted in both the systems with different values, it should add the records.
    How does HANA have a check in this situation?
    Please throw some light on this.

    Hi Vishal,
    i suggest you to take a look to SAP HANA SPS03 Master Guide. There is a comparison table for the three replication technologies available (see page 25).
    For Multi-System Support, there are these values:
    - Trigger-Based Replication (SLT Replication): Multiple source systems to multiple SAP  HANA instances (one  source system can be connected to one SAP HANA schema only)
    So i think that in your case you should consider BO Data Services (losing real-time analytics capabilities of course).
    Regards
    Leopoldo Capasso

  • Master data load from 2 source system

    Hi all,
            I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding
    attribute. Because all the objects which i want to use compunding attribute are reference
    objects for lot of other info objects. So, i dont want to change the business content
    objects structure. Please guide me
    Thanks

    Hi,
    I cube there is nothing to do with compounding attribute, it will be handled in MD IO level.  As your requirement to separate the transaction happen in different source system then make add another info object as Zsource and make it as nav. attribute then design your report based on nav. attribute.
    Note that this separation is only possible in Material Related transaction not for others.
    Thanks
    BVR

  • How to load master data from 2 source system without using 0logsys as compo

    Hi Gurus,
    I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
    So, please help me out providing logic.
    thanks in advance
    Peter.

    Hi Peter,
    Can you brief me how did you resolved your issue?
    Regards
    Utpal

  • Replicate datasource from SRM source system

    Hi,
    I need to replicate datasource from SRM source system I am able to see datasource under application component in RSA6 when I tried to replicate those component In BI by selecting Replicate Tree Metadata I am not able to see any application component in RSA1 .
    Thanks,
    Senthil

    Hi Senthil,
    i know your issue. the problem is when you are going to do replication in first time you dont find any application components.
    so what you have to do is go to the BI SYSTEM and go to your SRM Source system and select and right click and select Replicate Datasources.
    if you are doing first time replication it takes a quite long time.
    so once its replicated then u will b able to see the datasources as well as the corresponding application components.
    next time in SRM if you enhance the datasource you can directly select the datasource and right click say replicate metadata.
    once solved get back to me
    HOPE THIS HELPS YOU
    regards
    vadlamudi

Maybe you are looking for