Transports-- hello J

P079223
Re: want to know everything about transports 
Hi ,
Check SE10 and SE09..
I hope u know the difference between the customizing transport req and Workbench Transport req . If not revert me .
J
Hello J,
I thought since i marked my old thread as solved. so i started this new one.
Well yes i got these tcodes from link given earlier
and yes i don't know difference between 'customizing transport req and Workbench Transport req '
thanks
surjit

Hi,
The difference are
<b>Workbench Requests</b>
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
<b>Customizing requests</b>
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with  Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the  standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Hope u understood.
Thanks&Regards,
Ruthra.R

Similar Messages

  • Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
    Regards
    Léonie

  • Hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

    hello! i am from Romania and i want to buy an iphone from the USA site. can i buy it neverlocked? and if it is possible how much should it cost in totat(with transport and the iphone price)?

    You can buy a factory unlocked on direct from Apple sim free, make sure you get the right one and not just a contract free one.  I am sure  one of our US members will be able to give you the price.

  • Error while transporting a data type

    Hello all SAP PI Experts,
    I'm trying to transport a data type but I'm getting the below mentioned error.
    This is happening even when I gave the proper name of SWCV that contains this data type.
    Please suggest how this problem can be solved.
    Thanks,
    Ajeya G V

    Hi Ajeya,
         An easy trick is to open the DataType on your Enterprise Service Builder, and once it is opened,  (not edit, just open) go to Tools --Export Design Object
    The correct SC will be filled as default.

  • Error while transporting using CTS

    Hello Everyone,
    While transporting the ESR changes from Dev to integration environment i am getting this error.
    Its a SOAP to  RFC scenario and first time it worked fine. today when i did some changes and wanted to move again through CTS its giving a problem . Its SAP 7.11 version.
    CTS Deploy Service - Version 0.93 06.03.2007
      ========================================================================
      Deploy Web service destination = CTSDEPLOY
      Directory = /usr/sap/trans/data
      SDM Deploy URL =
      SLD Deploy URL =
      XI Deploy URL =
      SoapFaultCode:5 Authentication failed. For details see log entry logID=1ADC6A3175029F4D000000040025
      >>>80B2 in security log.
      Deployment
      End date and time : 20120119234349
      Ended with return code:  ===> 12 <===
    Thanks
    Ravi

    Hi Ravi,
    Please check this forum thread which talks about same issue:
    CTS+ For PI Error: SoapFaultCode:5 Authentication failed
    Regards,
    Ashutosh

  • Error while transporting Infocube

    Hello all,
    i am getting following error while transporting infocube to testing system.
    Please see the bellow error message details.
    Error/warning in dict. activator, detailed log    > Detail
    Structure change at field level (convert table /BIC/DZMD_Y_MR2)
    Structure change at field level (convert table /BIC/FZMD_Y_MR)
    Table /BIC/DZMD_Y_MR2 could not be activated
    Table /BIC/FZMD_Y_MR could not be activated
    Return code..............: 8
    Following tables must be converted
    ZMD_Y_MR InfoCube could not be activated
    Thanks in advance.
    BR,
    YVReddy

    Dear Venkat,
    Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
    for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
    regards,
    Srini

  • Error while transporting database index into quality system

    Hello,
    I am getting an error while transporting a new index in quality system.
    I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
    While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
    I retransported the objects using a new request. However I still got the same error.
    Please help.

    Navin,
    No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
    K.Kiran.

  • Error while importing a transport request

    Hi,
    I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
    When I try to import a Transport request I get the following error:
    HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
    Please help me find a solution to this problem.

    Hello Occoro,
    There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
    1730009 - Import queue does not work
    Downloading R3trans and tp is similar to downloading kernel.
    Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
    In the same area where you get SAP Kernels, you should be able to get files such as:
    R3trans_xxx-xxxxxx.SAR
    tp_xxx-xxxx.SAR
    Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
    Refer to the following note for more details:
    19466 - Downloading SAP kernel patches
    Good luck.
    Regards,
    Siddhesh

  • Error while releasing transport request -  Special character "_" in generic

    Hi all,
    we're receiving the error  Special character "_" in generic key  when releasing a best practice transport.
    Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
    but we have only one entry where field BWERT has a wildcard '*' as entry.
    Does anyone has  some idea how to solve this ?
    kind regards !

    Hello Bjorn,
    How did you get this solved?
    I'm having nearly the same issue:
    A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
    60, there's no message rejecting the entry.
    Regards

  • Webinar: Change Management and Transport in the Enterprise Portal

    <b>SAP NetWeaver Know-How Network Webinar: 
    Change Management and Transport in the Enterprise Portal
    Wednesday 21 July 2004
    11 a.m. EDT</b>
    On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterprise Portal</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
    Here’s how Scott describes his webinar presentation:
    “Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments.  This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting.   We'll also look forward to Change Management enhancements coming with Netweaver 04.”
    SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
    <b>How to Participate</b>
    (Please go to the SDN Events page to see the article and download the PDF presentation)
    Dial-in Information:
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Within the U.S., call: +1.888.428.4473
    Outside the U.S., call: +1.651.291.0618
    Password: NetWeaver04
    WebEx Information:
    Topic: SAP NetWeaver Know-How Network
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Meeting Number: 742391500
    Meeting Password: netweaver04 (lowercase)
    WebEx Link: sap.webex.com
    Replay Information:
    A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
    Toll-free: +1.800.475.6701
    International: +1.320.365.3844
    <b>About the SAP NetWeaver Know-How Webinar Series</b>
    The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
    <b>Disclaimer</b>
    SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

    Hello,
    In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
    SAPnote 727180 - Version of PAR File in Manifest File
    denies this.
    Can you clear this out?
    Kind Regards
    Koen Van Loocke

  • Transporting Views created for Logical Database in QAS

    Hello all,
    Can anybody let me know teh steps...
    How to transport views created for logical database from dev to QAS...
    kindly give the steps...
    thanks
    saurabh

    I don't think PNPCE does anything with HRP infotypes.  PNPCE is all about PA data since PERNR is the main key.  Logical DB PCH is the one that deals with HRP Infotypes.

  • Runtime Error in Test Client after Transport

    Hello SDNers,
    I did enhancements to standard SAP component ICCMP_BP_SEARCH in developement system in client XXX of system SSS.
    I wanted to test the functionality in client YYY so used SCC1 transaction to transport from client XXX to client YYY.
    But when i tried to test the application, it resulted in runtime error.
    I had kinda identified the problem while debugging, in the class CL_CHTMLB_CONFIG_UTILITY method CREATE_UI_ELEMENT, it is not taking my Z class references rather it still referring to starndard classes.
    My Z classes are created for IMPL  class, CTXT class and CN00 class.
    If any one has suggestions your help would be appreciated
    Thanks in advance.
    Best Regards,
    Srikanth

    Srikanth,
    Is the definition of the enhancement set defined properly for your test client.  This table does not transport and you have to maintain it manually in each client.  The view is BSPWDV_EHSET_ASG for SM30.  Client is not the first field in the table, so you have to edit this view in each client.
    Take care,
    Stephen

  • Copy contents of a txt file into a transport request

    I am implementing the steps of the 990534 note.
    The note says "Create a new transport request (transaction SE09) in the source client of your Solution Manager system. Unpack file SOLMAN40_MOPZ_TTYP_SLMO_000.zip, which is attached to this note. Copy the contents of the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file into the transport request."
    can anyone tell me how can I copy the contents of a txt file into a transport request?

    Hello,
    I don't know the OSS note, but I think they mean, that you have to go into the object list of your transport (in transaction SE09), switch to change mode and insert the objects from the text file.
    I guess the text file looks like:
    R3TR PROG xyz
    R3TR TABL abc
    Best regards
    Stephan

  • How to find transport number

    Hello,
    I have a table and a request was opened for it but not released . Is there a way that the transport request can be known.
    It was created by some body else so its not under name.
    when i check with the active and the one in database , it shows that there are some modifications.
    Please let me know how to find the transport number
    Thanks

    Hi kajol,
    Go through the links,
    http://help.sap.com/saphelp_47x200/helpdata/en/3e/c06e08fe4f11d3b2a3005004ed1ff7/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/67/86b2b2415811d1893d0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/9b/cfb237fec48c67e10000009b38f8cf/frameset.htm
    Regards,
    Azaz Ali.

  • Multiprovider transport problem

    Hello Friends ,
    While transporting the  multiprovider from BW Development to BW Testing system I am getting following error in the Log display of BW Testing System,
    R3TRMPRO***(Multiprovider name) was repaired in this system.
    The log display for the Delevelopment system shows messages 'Feedback after export or import'--'Successfully Completed'
    But the problem occurs in BW Testing system ,
    and we are getting the above error message ,
    Import--(8) Ended with errors
    please suggest solution .
    Thanks in advance.

    Hello A.H.P ,
    Thanks for valuable suggestion.
    I think someone has directly repair this multiprovider in Testing system.
    I will do the required steps as suggested by you.
    Agains thanks very much .
    Message was edited by: Amol Kulkarni

Maybe you are looking for