Transports in BW Quality

Experts. I have an issue with the transports. I was changing Update rules for my cube, thinking that I was in Development. But I was in Quality. Now I have made changes and generated transports in quality. But I haven't released them yet.
Any suggestions to get rid of the the transports in BW quality will be greatly appreciated.
Thanks.
JD

SV S & Luis. Thanks for the update.
Firstly. The cube does not exist in Production. So Luis, your suggestion does not fit my scenario.
SV S. I did think of unlocking & deleting the request in Quality. And I like your suggestion of reimporting from Test to quality. That should undo the changes I made in Quality. Am I correct? Won't I have any problems when creating trnsport from Dev to Quality?
For example, the system may issue warning saying that Quality was chnaged without changing hte development system. I have been getting these messages on my system when try working with objects that have been activated for other applications or by other users.
Thanks.

Similar Messages

Regarding query transport in BW quality system

Hi Experts ,
When I transport my query to BW quality system. It is showing error like "error activating element " .
I searched in SCN and found that name for this technical element can be seen in RSZELTDIR table.
I got technical name and it was query name itself. Again I transported only this element and it is giving same error.
I am working in BW 7.4 and fresh implementation is going on .
Is there anything which is missing while transport query in quality system .
I have attached snapshot .
Please help.
Thanks
Devesh Varshney

Hi,
Please try to check and follow below steps.
1. Thru RSA1-->transport connection, collect your query and all elements(RKC,CKF,variables ..etc)
2. Later check qll query elements are saved in custom package or &tmp. if its in $tmp then save package and store into custom package.
3. collect objects into new Transport request.
4. Check your transport request have any inconsistencies thru program - RSO_TLOGO_CHECK_REQUEST. Or
5. later release and import to targets system.
Even cross check query have any inconsistencies thru program - QUERY_CHECK.
if you get error, please share error information in detailed.
Thanks

DTP not getting displayed in Transported Objects in Quality System

We are Tranporting all the CRM Master Data but no DTP AND IP are getting displayed in Quality system is there any setting to make to transport these or get it displayed.
Please help
Thanks
Soniya

I dont understand the question. Can you pl explain what do you want to do?
Ravi Thothadri

Error while Transporting Ztable to Quality

Dear All,
                 I get a foolowing error whenever i try to transport a Ztable to Quality.
Pls suggest.
System   QAT              Command TMS_MGR_IMPORT_TR_REQUEST
Client   401              Service Transport Service
User     ABAP1            Start    Online
Date     03.12.2008       Function TMS_TP_IMPORT
Time     15:16:22         Message TP_REPORTED_INFO
    Errors during import (return code 0008)
    Cause of the error can be found in the transport logs
Errors during import (return code 0008)
Message no. XT220
Diagnosis
Errors occurred when importing one or more transport requests. The highest return code was 0008.
Transport request: DEVK914196
System Response
The requests are imported.
Procedure
Use the transport logs to investigate the cause of the error. If necessary, inform the owner of the transport requests.

Eric Cartman wrote:>
> >
saslove sap wrote:
> > ... and more over it is suggested to use diff transport request to each of them ...
>
> I wonder, from where does it come from, but it is NOT suggested to use different transport requests at all!
Hi Eric,
Thanks for pointing out !!
i mean generally we use one data element is various tables & domains as well...So it is generally suggest to use seperate Transport request to avoid confusion!!
Regards
Sas

Transport FG from Quality to Production

Dear All,
I have created couple of function group and transported to Quality system. Now as per the requirement I have made the changes in different FM of these FG as well as includes. So there are few versions in DEV system.
Now finally i want to transport the these FG to production system. So which transport request I have to use to move to the production?? In Quality it showing different request for each FM and include (Latest version request number).
Can anybody tell me how I can transport my all FG to the production via Quality??
Is it good way to create one more request for all FG using SE03 tcode, so that all FM with includes i have final request in DEV system which I can move to Production via Quality....
Good suggesstion are most welcome.....
Thanks in stack......

Hello Nilesh
This is quite a common problem with function groups.
However, if you have at least one system where the entire function group is complete (i.e. contains all function modules and the TOP include contains all data definitions and the frame program all additional includes) then you can go to the workbench (SE80). Right-click on your function group and choose "Other functions" -> "Write transport request entry". The CTS puts the function group into the transport request which should then be transported entirely.
I highly recommend first to "synchronize" your DEV with your Quality system, repeat the tests there and, if everything was successful, transport to Production.
Regards
Uwe

Transporting LSMW without creating transport request( from quality to prodn

Hi All,
I have created an LSMW in quality, I need to transport it to production with out creating any transport request.
Kindly let me know the procedure for the same.
Please help!!!
Vivek Gupta

Hi,
In the transaction LSMW, from the menu:
From your Quality system give your lsmw name and then do:
Extras->Export Project
This will export your lsmw created to an local path.
Then after logging into Production you can import
that lsmw from the lsmw transaction only:
Extras->Import Project
Hope it helps
Regards
Mansi

Problem while releasing a transport request to Quality for BADI

Hi i have implemeted a BADI for ME21N User exit.
I have transported the BADI to Quality.
It is giving an syntax error.
But iam not getting any error message in Development.

Error in ABAP application program.
The current ABAP program "CL_EXIT_MASTER================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "ZCL_IM__ITMETAL_ME21N=========CP ", the following syntax error
occurred
in the Include "ZCL_IM__ITMETAL_ME21N=========CP " in line 5:
"INCLUDE report "ZCL_IM__ITMETAL_ME21N=========CL" not found."
This is what the error iam getting .
But iam not able to see this include anywhere in SAP.
I

Problem in Importing Transport Package in Quality

Dear All,
I had created an Transport Package on Development Server of EP.
That transport package has got three ivews and one work set and two role.
I downloaded that Transport package ".epa" file on my local machine.
I tried to Import that ".epa" file in Quality Server of Ep i am getting an error "Could not upload file. Check the log files for details."
I need to know how to resolve this problem.
Please help fast.
Regards,
Swapnil Indulkar

Hi swapnil,
Whats the error you are getting in Log file.
once check it provide the details here. and at the time of Exporting in EP Development is it given the sucess message with '0' errors?
Check the log file in <host:portno/nwa-> Monitoring --> logs and traces
Regards
Mahesh

Importing transport request bypassing quality system

HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul S

Hi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V

Unable to find the transported query in quality

hi experts,
i have modified one query in development according to client requirement and it has transported to quality, but i am unable to find that query in quality, but basis consultant successfully transported.
what is the problem,
pl help me,
thanks in advance,
venkat.

Hi,
Input the name of the query in Query Designer wrt the quality system and try to display the same.
BR/
Mathew.

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

Can I transport changes thru Quality to Production without dropping data?

Hi,
I have data on a Quality system which is being used and it has become critical to extent that the Quality system is treated as Production.
Now, there have been some changes in Development: 5 new key figures and 10 new characteristics. As a result, there have been modifications in the Infosource, update rules, ODS, Multiproviders, etc on Development.
The plan is to transport these changes on Dev to Production and load data on Production for comparison against the data in Quality.
(It may sound weird but that is the plan since there are some problems on Development)
My question:
Since the changes have to go through Quality to Production, will there be problem on the data on Quality?
The goal is to freeze the data in Quality. Can the changes go through Quality without the need to drop the data in Quality?
[Note that the objects are going to Production the first time: we do not overwrite any existing objects on Production]
Thanks

Hi,
You need not do anything special while releasing the request. If anything needs to be done, Basis should do it.
For that matter, Basis should be able to copy the CO and DAT files of a particular released request, to the import queue of any SAP system and import it there. They would do that using operating system level commands.
For us lesser folks, ther are above the table methods:-)
If you go to transaction STMS in the development system and click on the 'red truck' (transport overview) you would be able to see the import queues of the D, Q and P systems.
You can double-click on each system to see the requests.
If you have released a change request, it would be exported and available in the import queues of the Q and P systems.
If the request has been imported the status will show with a 'yellow triangle'.
If the request is yet to be imported it would show with a 'green square'.
In a particular import queue, you may choose the request that is not imported and import it into the system.
Having said all this, it is quite possible that Basis may have configured the transport domain in a different manner. It is possible that the Quality system is configured for Quality assurance. That is why it is important to do this in association with the Basis team.
Since the possibilities are many, a link is attached for further reading:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a09a7acc11d1899e0000e829fbbd/content.htm
Mathew.

Transport system - develop-quality system

Hi,
we would like automate the transport from our change requests from develop-system to quality-system.
Does anyone know if there is a possibility where a user can release change requests without an automatically transport?
Can I define it in the transport route?
Thanks
Michael

HI
GOOD
go through this link, i hope this ll help you to solve your problem.
http://help.sap.com/saphelp_nw04/helpdata/en/90/972715cd8c11d2b41400609419f767/content.htm
thanks
mrutyun^

Transporting problem to quality

Hi friends,
i'm receiving a problem while importing the requests to quality. imorting is ending with error : 8 i.e object has not be over written.
but the problem is i am receving errors when i'm transporting newly developed objects. how to come over it. do i have to copy and create new one.
thank you.
kat

the newly developed objects may he link with the previous developement..
like ztable ,zstructure,etc..
check and re trasport
Regards
Anbu B

Transport request in quality server

Hi everyone..never mind if this is not the correct place to post this question..i have the access to ECC QUALITY SERVER..i tried to generate the datasources in ECC Quality server..it has given PROMPT FOR LOCALWORKBENCH REQUEST pop-up window
when i look for the available requests through F4(input values)..there are no input values..
Dont we have the possibility to activate datasources in quality server?why so?and if anybody knows details about development,quality and production server could you please give me a broad explanation??im confused with these three types of servers and how they work!!
Thank you very much in advance for any help,
Edited by: yarpath on Sep 22, 2011 11:21 AM

Hi ,
Along with provided details Some info about server .
In SAP Landscape we have a server system called SAP architecture
DEV, QAS and PROD.
- DEV would have multiple clients.
190- Sandbox -Sandbox doesn't affect the other servers or clients its standalone system
100- Golden- dev and changes transferred to next level via transports it contains all configuration and master data .So all the configuration settings are done in golden clients and then moved to other clients. Hence this client acts as a master copy for all settings to be done so called "Golden Client"..
180- Unit Test- if configures then Transports from golden client will come here .
- QAS may again have mutiple clients
300- Integration Test
700 to 710 Training.
- PROD usually have one client
this depends on how is the client's business scenario.
Request flow like
DEVELOPMENT -> QUALITY -> PRODUCTION
DEVELOPMENT : where developer create new objects and flow or change existing one .
QUALITY : The objects moved from Dev tested as it has large amount of data and usually a copy of production so new development get tested with real time data and any bugs etc found can be fixed back in dev and get transported again .
PRODUCTION : Day to day business data is present here coming from different systems (R/3 ,flat file ,NON SAP system etc).
--In quality or producation you cannot see your transport request and it will not allow you to change object .
--Usually we have only access to create DTP ,Process chain ,Program etc in Production but we cannot change transfromation etc as the flow can not be disturbed .
--To see the status of your objects in any system which are moved via transport you need to see logs in Dev system .
--this will also tell you which systems are connected to your dev system .
Hopw this will be helpful .
Regards,
Jaya Tiwari

Transports in BW Quality

Similar Messages

Maybe you are looking for