Transports in SAP sourcing 7.0

Hi,
I am using sourcing 7.0
I have prepared all the export.oma files for CLM, and I was just trying to see if I can import one of these successfully or not. I was under the impression that it can be done through u2018Import Datau2019. However found out that u2018Import Datau2019 doesnu2019t allow import for .oma files. It says this type of file is not allowed when I try to
Can you please let me know what is the way to do the imports through CLM UI?
Regards
Moumita

Hi Moumita,
oma files can be imported using Import Data. There is a system property u201Cattachments.upload.file.extension_listu201D. The values of this system property is a list of semi-colon separated file extensions. I suspect, .oma file extension is not included in that list.
Regards,
Vikram

Similar Messages

  • Transporting migrated data sources from BID to BIQ

    All,
           I have a 3.x data source which I have migrated to 7.x. Now I want to transport this from BI-D to BI-Q. when I replicate the data source in BI-Q this is likely to be 3.x data source. Will it be overwritten when I transport the data source from BI-D to BI-Q. Is there any thing that I will have to do before moving the transport. Please advise

    If you transport the DataSource on R3/ECC from development to QA that's connected to your BW QA, and then transport the DataSource from your BW development to QA environment, there is no need to replicate the DataSource. It may, however, come into your BW QA environment in a deactivated state. If that happens, just activate it in the BW QA environment using the SAP delivered ABAP program RSDS_DATASOURCE_ACTIVATE_ALL.

  • Create SAP Source System Failed

    Hi all,
    We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

    Hi,
    Check the Default Logon <b>Client</b> for ECC 5.0
    and verifiy that the User is in the Same Client
    Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
    regards
    Happy Tony
    Message was edited by: Happy Tony

  • Data Reconciliation Node on SAP Source System

    Hi Gurus,
    I'm working on Data Reconciliation between SAP BI and SAP R3 systems.  I've read on the forum that the reconciliation DataSource technology is available as of PI-BASIS 2005.1 / SAP NetWeaver 2004s.  I'm using
    SW Comp     Release             Level     Highest Support     Desc
    PI_BASIS      2005_1_640      0017      SAPKIPYJ6H         Basis Plug-In (PI_BASIS) 2005_1_640
    I wonder that I cannot see the Data Reconciliation Node in the transaction RSA6 in the SAP Source System.  Please throw some light on this whether I need to activate them.
    Thanks & Regards,
    Ash.

    Hi Sunny,
    Thanks for your response.  Can you suggest me what should I do to get those DataSources?  Are there any patches that SAP has released to overcome this problem for lower versions as the one which I'm using?
    Thanks,
    Ash.

  • SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

    Hi All,
    We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
    We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
    We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
    However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
    Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
    Regards,
    Siva.

    Hello Siva,
    I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
    Let's see what other experts suggest.
    Thanks,
    Siva Kumar

  • Error in Creating a WebI Report on SAP Source using Rich client in BOxi 3.1

    Hi
    I tried to create a webi report using rich client on sap source. I get a error message " A Database error occured. the Database text is 'unable to connect to SAP BW server name and password is incorrect(repeat logon) (WIS 10901) .
    SAP Integration kit installed
    BO XI 3.1 is installed on windows server 2003
    Application server - Tomcat 5.5 server.
    Any configuration or sap files/folders should be added?
    how can I move forward to solve it ?
    Thanks!
    J.M Raj

    Hi
    Ya I used SAP authentication - then also get same error.
    Connections are created with username, password to access SAP Source
    Thanks!
    J>M>Raj
    Edited by: John Milton on Jun 25, 2009 10:03 AM

  • Bex transport  in SAP BW 3.1

    Hello everybody,
    how do you organize Bex transport in SAP BW?
    In our installation, we find it necessary that some queries need to be designed in development system and tested before transport in production. We would like the person who's creating these queries to be able to create and release the transport for his query himself. With just one standard Bex transport this seems difficult to implement:  In our constellation, the standard Bex transport can not be transported to production system, because it may contain test queries, which are not wanted in productive system at all and collects changes of different projects and persons, so it may contain objects that are still in test status, while others need to be transported to production system. Collecting into different requests is only possible if the concerned objects belong to different packages?
    Collecting the needed objects in a transport request manually can't be done without releasing the Bex transport first because otherwise the objects are locked.
    How do you organize Bex transports in your system landscape?
    Thanks for any suggestions, Kathrin!

    Hi Kathrin,
    if you create a query in the development-system, the query will go to the Package $TMP, so no Transport is necessary. If you have a naming-convention, like <InfoProvder>_QU_nnnn or someting else for non-test Queries, it is easy to fetch them in the Transport Connection (Admin Workbench) and transport them in the production-system.
    Hope this helps,
    Regards
    Frank

  • Error While Transporting export Data Source

    Hi Experts,
    We have a requirement to transport a data source from development to quality system through acceptance box.
    We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
    Please suggest how to get these 2 fields in acceptance box.
    Thanks,
    Sachin Motgi

    Hi,
    Check if your data source extract structure is having all 40 fields.
    Save and generate the data source again, replicate and then transport.
    I hope it will help.
    Thanks,
    S

  • DYNPRO_SENT_IN_BACKGROUND Error while transporting XI data source

    Hi Experts,
    We are having an issue in in transporting XI data source in BI from Dev to Test. The error is geenrated during post handling of the transport, possibly while the data source is bing activated. Teh ST22 dump gives the DYNPRO_SEND_IN_BACKGROUND error. Following informaiton is available in the User Information section of ST22 dump.
    Call Program........."CL_RSDS_WEBSERVICE============CP"
    Function Module..... "RSDS_WS_WEBS_GENERATE"
    Information on where terminated
        Termination occurred in the ABAP program "SAPLSTRD" - in "SYSTEM-EXIT".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 0
        of the (Include) program " ".
    Please give us your advice on how to nail down this issue.

    Hi,
    Check if your data source extract structure is having all 40 fields.
    Save and generate the data source again, replicate and then transport.
    I hope it will help.
    Thanks,
    S

  • Getting Error While Uploading Clause Document in SAP Sourcing 9.0

    Hi,
    --------------------system description--------------
    SAP Sourcing 9.0
    SAP NW7.31 AS JAVA
    IBM DB2 9.7
    I am getting error while executing clause document.
    ----------------------Error Description---------------
    Login with buyer link into the system-> it has all authorizations
    then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
    it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
    Thanks and Regards,
    Murtaza Najmi

    Hi Gary,
    it is standalone system i have, everything i have installed on one server.
    i have already checked with restarting IIS server, and i can see word service while running url in contractgen.serviceurl, word service is running fine on browser but when i upload the document a popup window comes with error as i have shown above in my query
    Thanks once again Gary for replying
    Thanks and Regards,
    Murtaza Najmi

  • Error when activate a SAP source system

    Hello Experts,
    I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
    In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
    I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
    Thank you vey much in advance,
    Niurka

    Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
    I hope that you can give some tips or solution for this issue,
    Thanks!

  • SAP Source System showing up as BI Source System in RSA1

    I have 2 BW systems and 2 CRM Systems.  In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
    The Logicial Systems and RFC Connections all appear to be the same between each pair.
    In the other system, using identical procedure, it the source system gets listed as a BI Source System.  The 2 CRM systems have identical components and version levels as do the 2 BW systems.
    Any idea why and if this would make any difference and how to correct.

    Hi,
    To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
    This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
    Rgds,
    Colum

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • SAP Source system creation in BI

    Hi Gurus,
    I am trying to create SAP source system in BI,  The trying to create ALE REMOTE user in both systems.
    What roles and profiles i need to assign to this user id. After creating user ids what steps i need to follow. Thanks.
    Best Regards,
    Suresh.

    Hi,
    To Create SAP Source System In BI:
    -Click on Source System tab in RSA1.
    -Then right click on the heading Source system and select Create.
    -Select the first option Automatic. Create SAP System and continue filling the other details.
    -This will create Source system automatically.
    When you enter background user's password, sap system user name is modifiable, but the the BI user.
    The background user of BI system, is defined in
    RSA1 => Settings => Global Settings
    <b>BW User ALE</b> field will have the name of the background user in BI.
    If you are using ALEREMOTE as background user, make sure the same is maintained as BW User ALE.
    regards,
    Pruthvi R
    Message was edited by:
            Pruthvi R

  • System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

    Hi,
    I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
    Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
    i have followed the steps in config guide of SAP ERP with SAP Sourcing.
    when i am creating business system in SAP Sourcing system type ERP is not available.
    i have also attached the error file, please check
    --------------Version---------------
    ECC 6.0 Ehp6
    SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
    Thanks and Regards,
    Murtaza Najmi

    Thanks you Prasad,
    this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
    Now , I am getting error while uploading clause document,  my functional team member are not able to upload clause document. kindly suggest.
    ----------------------Error Description---------------
    Login with buyer link into the system-> it has all authorizations
    then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
    it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
    Thanks and Regards,
    Murtaza Najmi

Maybe you are looking for